Resume - Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects...

Misco Jobs

Resume #85721

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCES

Name of Company / Country: United Company For Inspection & Quality (UNICO)
Al Khobar, Saudi Arabia
Position Held: Electrical/Instrumentation Engineer Personnel supply to SA ARAMCO (Oil & Gas) & SABIC (Petrochemical)projects
Date Joined – UNICO: May 20, 2008 -May 22, 2009
Responsibilities/Duties

: Familiar with International Standards like NFPA70 NEC, IEC, NETA, NEMA, IEEE
- Preparation of inspection reports, testing & implementation, work accomplishment reports, issuance of procedures
- Involvement in the preparation of project quality plan, inspection test plans, special work procedures, check list and reports etc., in coordination with the QA/QC team.
- To inspect the Electrical Equipment to be used and installed as per client Inspection Test Plan (ITP), specification and quality manual.
- Attended weekly projects progress meeting, Inspection Quality Activities.
- Review and verify drawings/details as per Scope of work including Single line diagrams.
- Surveying of installation-supports, conduits piping works.
- Surveying installations and reports preparation in prior to the pre-commissioning.
- Raising of R.F.I (Request for Inspection) prior to all related Electrical work & submitting to QA/QC manager.
- Make material inspection report after receiving inspection is completed.
- Conduct surveillance site monitoring to assure that the electrical activities are based on company standards before final inspection.
- Support and assist the client during testing and commissioning of the equipment/system.
- Control and update drawings, specification, submittals received and approved by the client for construction site copy/Issued for Construction.
- Coordinate and attends weekly progress meeting together with the client and sub-contractors representatives.
- Prepare daily, weekly, monthly, progress report.
- Grounding grid installation inspection
- Cable on drum meggering inspection.
- Cable trench installation inspection.
- Cable laying on trench inspection.
- Conduit installation inspection.
- Electrical Installation in classified locations inspection.
- Electrical cables termination inspection.
- Testing of all protective devices like Relays, CT's etc.,
- Preparing NCR's & submitting to QC supervisor/Manager.
- As a Inspector, Maintain a record of Pro-active Violation & Violation after the facts of all sites activities
Projects Assignment
(From Recent) 1 Global Sources
Project: SAUDI ARAMCO Khurais Industrial Support Complex
Position: E & I QC Inspector
March 24, 2009 – April 25, 2009

2 Development Equipment Materials Technology Establishment (DEMTE)
Project: SAUDI ARAMCO AINDAR GOSP-3 (Gas Oil Separation Plant)
Waste Water System Upgrade Project
Position: E & I Engineer / QC Inspector
Dec 2008 – March 20, 2009

3 Sinopec International Petroleum Services Incorporated (SIPSC)
Project: Yanbu National Petrochemical Company (YANSAB Olefin)
Position: QC Electrical Inspector
July 2008 – Nov 2008

Name of Company / Country: US Distribution Asia Inc. for Reelcraft USA
Position Held: Technical Service Engineer
Period (From – To): Aug 15, 2004 – May 15, 2008

Responsibilities/Duties

:Trained in Reelcraft HQ Indiana USA with Engineering department for product technical specifications and special applications.
Improved technical communications between Asia Pacific clients and Reelcraft engineering department for special applications requirements. Communicate and travel abroad in Asia Pacific countries including Singapore to do technical service support to Reelcraft USA distributors. In mobile office, meeting distributors, engineers, directors, owners for technical application support with Reelcraft products.

Name of Company / Country: SECA Computer Shop Angeles City
Position Held: Desktop Support / IT
Period (From – To): Jun 18, 2001 – May 18, 2008
Responsibilities/Duties: Assemble new desktop unit. Setup & maintain, upgrade HARDWARE/ SOFTWARE and LAN and Internet Network setting requirement.
Troubleshoot / repair hardware or software problem on each desktop or PC unit for a walk –in or on-call service to customer.
Knowledge on DNS, IP, local router on Internet & email setting, applications, upgrading, downloading, etc.

Name of Company / Country: Lite-On & Kyushu Matsushita Industries Phil.Inc.
Position Held: Facilities & Maintenance Engineer
Period (From – To): May 25, 1999 – Jun 25, 2000
Responsibilities/Duties
: Joined training for ISO 9000. Training on ISO Internal Quality Auditing IQA. ISO Procedural Training Understanding, Documenting, Implementing, & Maintaining an ISO 9000 Quality System.
Performed and Improved Efficiency of scheduled maintenance for facilities and Clean Room equipments and instruments.
Power Cost Savings as a result of Improved maintenance schedule.
Represent L&K for plant inspection schedule of government agencies such as building officials.

Name of Company / Country: EXPO PILIPINO Corp.
Position Held: Electrical Supervisor
Period (From – To): May 25, 1998 – May 22, 1999
Responsibilities/Duties
: Acting as Duty Officer (Engineering & Maintenance Head) on scheduled basis.
Direct supervision on electrical projects installation and maintenance schedule on electrical power system of the EX PO Theme Park.
Owner's representative to witnessed Quality Control inspection of electrical system project.

Name of Company / Country: HSIN TUNG YANG CO. LTD, TAIWAN ROC
Position Held: Engineering & Maintenance Staff
Period (From – To): Aug 2, 1994 – Jul 31, 1996
Responsibilities/Duties
:
In an ISO 9001 Certified Company, Diagnosed, Repair & maintenance of electro-pneumatic, electro-mechanical, electro-hydraulic, pneumatic machines used in production area including food conveying systems and central air conditioning and refrigeration system of the factory.
Installation of new measuring and monitoring instruments such as pressure meters, volt / ammeters. Operation & maintenance of electrical power system.
Technical report and English operating manual/procedure writing for specific production equipment being used.

Name of Company / Country: AVANTEX MILL CORP.
Position Held: Electrical Plant Services
Period (From – To): Jun 19, 1993 –Jul 25, 1994
Responsibilities/Duties
: Regular inspection monitoring, operation & maintenance of electrical power system from 69KV substation, 13.8KV switch gear, 440V, 220V & 110V systems of the plant.

Name of Company / Country: Soft Touch Needle Craft
Position Held: Electrician & Draftsman
Period (From – To): Apr 25, 1988 – Jan 15, 1991
Responsibilities/Duties
: Operation & maintenance of electrical power system

Educational Qualifications/ Achievements

- Bachelor of Science in Electrical Engineering Holy Angel University (Dean's List)
June 1986 - March 30, 1991
Degree / Diploma
- Jose Abad Santos High School (Science Scholar)
June 1982 - March 1986
- Candaba Central School (5th Honor SPED Class)
June 1976 – Apr 1982

Other Information

- Registered Electrical Engineer: PRC ID # 3079

- Certificate of Completion: Calibration for Process Instrumentation
Meralco Foundation Inc. Technical Institute (Mar 8 –Apr 19, 2008)

- Affiliation: Institute of Integrated Electrical Engineers of the Philippines, Inc.
(IIEE Life Member since August 2, 1996 )

RECENT TRAININGS:
- In-house UNICO training for Saudi ARAMCO & SABIC Project Quality Control Inspection Procedures and ISO 9001:2000 awareness training
- Calibration Of Process Instrumentation (March 8 – April 19, 2008)
- Reelcraft USA Product Technical Service training (22 Oct. – 6 Nov. 2007) Indiana USA
- Reelcraft Indiana USA HQ, SEMA & AAPEX show Las Vegas NV USA (29 Oct – 11 Nov 2005)
- Other training thru Continuing Professional Education

SKILLS:
Technical Service Support 5yrs, Industrial & Manufacturing Electrical / electronics experienced 8yrs, Computer Hardware & Software literacy 8yrs.

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 2685)

Go to Search Parameters...

Brief Description

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Degree in Geological Sciences. Experience in laboratory of total and clay mineralogy analysis, sedimentology and petrography. Use of stereomicroscope and polarizing microscopy. Good knowledge of Office programs and basic AutoCAD and ArcGIS program.

Over 16 years of installation and troubleshooting experience within the instrumentation field in various chemical plants. Also have four years of process chemical operating, troubleshooting, and making recommendations for plant safety, quality and quantity of plant production.

Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.

I would like to express my interest in an entry level position in your Company. I completed M.Sc in Applied Geology from Jadavpur University in 2006 and now I completed my M.Tech in Mineral Exploration from Indian School of Mines University, Dhanbad and obtained first rank in M.Tech Mineral Exp

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

I have a University Degree in transport engineering. I’ve 3 years experience as cadet and OS. This year I’ll finish professional course and acquire navigator diploma. As beginner in offshore industry I’m ready to start at the bottom and begin my career on an oil rigs from entry–level positions.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc..

I am an American, with over 27 years of experience in the Oil & Gas Industry, with 11 of those years worked internationally. Qualifications include postings at various organizations as Head of Field Operations, Construction Superintendent, Operations Specialist, and AWS Certified Welding Inspector.

SAP Materials Management, ARIBA E-Procurement, Purchasing, Inventory and Warehouse Management

Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,

I have four years of hands-on benchwork experience in chemistry labs in University of Houston as a research assistant.

Technical, Managment, communication. Skills

Operations Manager; Telecommunications; Administrative; Business Development

Over six years experience working as an engineering and environmental geologist. Manage, coordinate and field supervise all drilling activities and field work for large scale geotechnical and environmental projects for government and industrial clients in the eastern United States and Africa.

maintaining and operating various types of heavy equipment in the forest industry, building industrial roads, road deactivation

I am qualified to work as an analyst, appraiser or consultant. Would welcome assignments in operations research, finance, market research, data processing and related areas.

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

Control room and plant operator, 10 + 2 +3 yrs of education, adequate computer knowledge, reciprocating,centrifugal pumps and compressors, handling DCS systems, experience-2yr 3 months in Oman,

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

Masters Degree in Chemical Engineering

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

I have eight solid years of experience in various Production Operations positions in Shell Gabon. the positions that I have held required leadership skills, excellent team working spirit and good communication skills which I firmly believe to be most valuable attributes.

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

I'm a well service / well intervention Supervisor

Highly organized and innovative Manager with an exceptional track record of cost minimization through creative procurement approaches and proactive management style focused on building trust and improving departmental teamwork in fast paced union environments.

I'm over 5 years experience in multinational and overseas company. Have strength in knowledge and leadership. I'm always give the best and reach the best in every role that I walk with.

MWD, drilling, construction

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

Camp attendant ( Customers Service) Hard working(drivers abstract 4-5-6-)

analyst

Research and Development Metallurgist . Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

Coordinate services for wells,oversee project,finalize all paperwork and run daily reports for wells.

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

P&PCM, MBA, B.Arch

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out