Resume - Recycle Hydrogen System,Recycle Gas Scrubbing,H2S Handling ,Amine Treating,React...

Misco Jobs

Resume #86220

CONTACT INFORMATION:
View contact information...

PROCESS LEAD OPERATOR 06+ YEARS EXPERIENCE
* September 2008 to Present in Sohar Refinery Oman (ORPC).
* October 2003 to September 2008 in Pak Arab Refinery Pakistan
(ISO 9001/14001 & OHSAS 18001)

OBJECTIVES:
* To contribute relevant refinery operating experience and expertise to a challenging position that allows for growth.
* To seek career opportunity in a company that will utilize my education and experience in Oil & Gas operations.

EDUCATION:
* B.TECH.(CHEMICAL) from Bahauddin Zakariya University Multan, Punjab, Pakistan.(Result Awaited)
* Diploma of Associate Engineering in Chemical Trade in 2003 from Govt. College of Technology Multan, Punjab, Pakistan.
* Matriculation with Science subjects in 2000 From Govt. High School Chowk permit M.Garh Pakistan.

WORK EXPERIENCES:
Inclusive Dates:

Experience # 2: Sohar Refinery Oman (ORPC)
September, 2008 to Present.
Units Handling:
Diesel Hydro Desulphurization:
The purpose of the Diesel Hydro Desulphurization Unit is to remove sulfur and nitrogen as a hydrogen sulfide and ammonia, respectively, by a catalytic hydrogenation from the feedstock, and produce diesel oil product with improved combustion properties. In addition, Unionfining is designed to saturate olefinic and aromatic compounds while removing other contaminants such as oxygenates and organometallic compounds.
Important Steps.
1) Recycle Hydrogen System
2) Recycle Gas Scrubbing a. H2S Handling b. Amine Treating
3) Reactions
4) Reactor Effluent Water Wash
5) Vapor/ Liquid Separation
6) Hydrogen Purification
7) FRACTIONATION SECTION
8) Stripper
9) Off Gas Absorber

Tame Selective Hydrogenation process & Gasoline Hydro Desulphurization.
The objective of the TSHP and GHDS process is to remove sulfur while avoiding substantial octane losses. Product light light gasoline from unit will go to the TAME unit for further treatment while hydrotreated gasoline will go to the storage.
Plant licensors for GHDS – TSHP Unit is Axens IFP. Plant capacity is 26500 BPSD and unit has a turn down capacity of 50%.
Important Steps.
1. Selective Hydrogenation Reaction Section in TSHP Unit
2. Splitter Section in TSHP Unit
3. Selective HDS Reaction Section in GHDS Unit a. H2S Handling b. Amine Treating

4. Stabilization Section in GHDS Unit

Tame Selective Hydrogenation process & Indirect Alkylation
The objective is to increase the octane of the SHP/InAlk product by increasing the concentration of 2-butene in the SHP section product. The SHP/InAlk products will be a C4 raffinate stream, a light alkylate paraffinic stream and a heavy alkylate paraffinic stream.
Important Steps.
1. Water Wash Column Section in SHP Unit
2. Reactor Section in SHP Unit
3. Stripper Section in SHP Unit
4. Polymerization Section in InAlk Unit
5. Hydrotreating Section in InAlk Unit
6. Stripper Section in InAlk Unit
7. Debutanizer Section in InAlk Unit
8. Rerun Column Section in InAlk Unit

Purpose of TAME Unit
TAME unit is designed for producing etherified motor gasoline for blending with other gasoline components so as to increase the octane number and reduce the volatility and the reactive olefins content from the overall gasoline pool.
Important Steps.
1. Reaction section
2. Fractionation section
3. Recovery section

Experience # 1: Pak Arab Refinery Pakistan (PARCO)
October, 2003 to September 2008.

Units Handled:
Naphtha Hydrotreating Unit (25400BPST)
The purpose of the Naphtha hydrotreating Unit is to prepare the feed stock for Platforming unit & remove the impurities which are permanent Poison for Platforming Unit Catalyst.
Important Steps.
1. Reaction Section
2. Stripping Section
3. Splitting Section

Platforming Unit (16350BPSD)
The purpose of the Platforming Unit is to increase the RON through catalytic reactions in Platforming Reactors.
Important Steps.
1. Reaction Section
2. Recycle Gas Section
3. Net Gas Section (H2 Purification)
4. Debutanizer Section

Continuous Catalyst Regeneration (454Kg/Hr)
The purpose of the Continuous Catalyst Regeneration Unit is to keep Platforming Unit in Continuous Operation.
Important Steps.
1. Burning Zone
2. Cooling Zone
3. Lock Hopper
4. Reduction

Current Position: Field Operator DHDS

Duties/Job Description:
* Resume shift duty and take charge from the outgoing Field Operator and on completion of shift duty, handover charge to the incoming field operator.
* Check and identify fault in unit, allied equipment and informs to DCS Controller / Shift Engineer / Shift Supervisor for raising work order. Co-ordinate with maintenance department and ensure that the repairs have been carried out to the satisfaction.
* Ensure that the unit is working according to the specified operating parameters and instruments are in working condition. Check equipment for any abnormal sound and / or vibration.
* Commission or isolate equipment as per the instruction of Shift Engineer / Shift Supervisor.
* Check Lube oil level, pressure, temperature and cooling water flow, temperature of operating pumps, turbine and compressors. Record readings of Lube oil change, Lube oil consumption, frequency of repairing on the prescribed log sheet.
* Check fired heaters for proper flame of fuel oil / fuel gas burners. Adjust for proper flame height. Avoid dripping of fuel oil from burners and gas leakage from fitting.
* Periodically operate standby pumps or compressors in order to ensure its reliability according to standing instructions.
* Take and send sample of various products and feed streams to laboratory for testing according to the prescribed schedule.
* Check safety devices / equipments to ensure that all safety devices / equipments are energized / in working order.
* Check and get rectified steam and hydrocarbon leakage in the area.
* Record all observations related to unit and allied equipment during shift hours in the logbook.
* Co-ordinate and communicate with DCS Controller for steady operation and timely availability of utilities and keeping abreast Shift Supervisor of any abnormal condition at Process Unit(s).
* Ensure good housekeeping. Use applicable PPEs while working at the plant.
PERSONAL DATA:
Father's Name: Mushtaq Ahmad
N.I.C 32302-5526460-1
Date of Birth: 02-11-1985
Nationality: Pakistani
Religion: Islam.
Marital Status: Single.
Passport Number: BJ1224601
PROFESSIONAL SAFETY COURSES
* Member of Emergency Response Team (PARCO)
* Work permit System
* Safety Behavior Training
* Gas testing
* SCABA
* Confined Space Entry
EQUIPMENT OPERATION SKILLS
Thanks to Almighty Allah, I have good knowledge about the operation of the following major equipments.
* Centrifugal & Reciprocating Pumps.
* Centrifugal & Reciprocating Compressors.
* Screw Compressor
* Steam Turbines
* Reactors.
* Absorption Towers.
* Different kinds of Heat Exchangers.
* Sundyn Pumps & Blowers.
* Instruments used in industry
* Fired Heaters.
COMPUTER SKILLS.

* Computer Short Course to Work in MS-Office, MS-Excel
* MS-Power point, Internet, Software's, Hardware etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 2685)

Go to Search Parameters...

Brief Description

Field Manager/ Operations Supt. with experience managing international oil/gas projects.

BE Chemical Engg. Experience in Multinational Storage terminal Ship loading/ unloading of Acids, petrochemicals and LPG.

A Mechanical Engineering Graduate with a total of 13years experience in oil & gas, petrochemical and food processing plant.

CRO/LEAD OPERATOR. OFFSHORE Oil/Gas production platform. Three phase seperation, wellbay, hydrocyclones, compression, dewpoint control, asociated utillities. Gas plant H2S removal, adsobsion, solvent regen, sulphur recovery, tail gas unit. Cryogenic N2 removal, mol sieves, cold box etc. Refinery exp

My expertise includes waste-to-energy facilities along with gas and oil fired boilers and all their associated equipment. I have experience in turbines up to 70 MW’s. I would make a good fit into any type of power plant weather it be in operations, maintenance, supervision or management.

Geodesist/Land Surveyor/Geomatics/GIS consultant

33 years experience in drilling industries, started as rig hand, since 15 years drilling supervisor, drilled several types of wells in different countries on and -offshore.

29 years oilfield experience from roustabout to site manager.

A highly experienced and reliable Operations Superintendent with 24 years offshore experience. An enthusiastic team member possessing a good sense of humour, capable of working on own initiative, with the ability and willingness to train and develop new team members.

To lead extra heavy oil production optimization; lifting, transporting, liquid-gas separation, pumping, dehydration, desalting and distillation. Coordinate, supervise and implement commissioning, maintenance and budget. To prepare economic evaluations. To implement and audit Iso-9002 systems.

Over 22 years experience in oil & gas production, plant management, maintenance supervision, environmental & safety, loss control. Extensive knowledge of oilfield technology. Available for immediate employment.

Objective: A self-starting, highly motivated team player looking to contribute to the goals and advancement of an organization through Health, Safety, and Environmental services.

Thirty years experience in the international field of Oil well Drilling

Rig supervisor during 25 years with ESSO France. Applying for a senior or junior rig supervisor onshore.

My objective is to continue my career as an international, and domestic, offshore oil & gas production operator/supervisor/trainer.

I have Eleven years experience in OIL/GAS/Petrochemical sector out that ten years with multinational companies in Gulf. Worked in Maintenance, Commissioning and Installation areas

Maintenance Supervisor

Functional summary Twelve years of experience in emergency medicine and international projects. Five years experience as a health and safety advisor on major oil and gas projects. Computer literate, excellent supervisory skills, creative thinker. Russian language ability.

22 years in oil field industry. Drilling and completion supervisor

My previous experience has been working offshore for Dubai Natural Gas Company for over 20 years. During this time I was promoted to Platform Chief after working as a Process Technician and Shift Supervisor.

My strength is in rig management and in particular jack-up rigs in the international market. In excess of twenty years diversified experience in execution and management of drilling and workover operations worldwide onshore and offshore.

OIL AND GAS SUPER/CONST 30 EXP US AND INTERNATIONAL

A Professional Engineer with more than 27 years oil & gas experience. P. Eng Status current

Broad experience in mid-stream and upstream oil and gas production and facilities. B.S. double major Petroleum and Chemical Engineering. M.S. Environmental Engineering

Talented and accomplished Management professional with strong background in logistics, materials management, and business development. International expertise in coordinating materials and logistics operations, including shipping, imports/exports, duty/customs functions, procurement.

9 years Experience in Oil and Gas offshore production process platforms as Production operator, Plant Operator. Worked in IRAN Petropars Gas development Project phase 6,7&8 as Field Operator through the employer DAELIM Ind. Co. South Korea, Well experience in Commissioning and Plant start-up also.

Recycle Hydrogen System,Recycle Gas Scrubbing,H2S Handling ,Amine Treating,Reactor Effluent Water Wash,Vapor/ Liquid Separation,Hydrogen Purification,Stripper,Off Gas Absorber ,NHT,PLATFORMING,CCR

Have all Oilfeild tickets

Relatively young well test engineer/testing supervisor with 10 years hands-on experience in well testing. ex-service hands with direct knowledge of how things worked and troubleshooting. Good interpersonal skill and work hard.

I am a chinese,39 years old.I graduated from DALIAN MARITIME UNIVERSITY.I have 5 years experience on Oil Tanker as Junior Deck Officer and 10years on FPSO as DPO & Cargo Operator.I hold Chief Officer Certificate.

Senior Operations Technician with over 25 years of experience as control room panel man/ field operator of LNG Plant, Jetty coordinator LNG. High pressure hydro cracker (isomax), hydrogen plant, CDU, Vacuum distillation and Visbreaker units. National Diploma in Technology Chemical Engineering

Free! A highly motivated professional who excels and thrives on challenging work. Self-managing; results oriented – used to working under pressure, with the ability to prioritise work tasks and meet deadlines. Excellent communication and organisational skills, and leadership qualities.

Presently working as Control Room Operator in a Natural Gas Plant & Shallow Water Platform for almost 5 years. Had also worked in Abu Dhabi with GASCO (NGL Plant) as process/utilities/control operator for 4 years & 7 months. Senior operator with Brunei Shell Petroleum (LNG Plant) for 4 years.

Objective To obtain a job in the in the Oil and Gas Industry that will challenge my abilities. Safety is my number one priority. Highly motivated individual with 29 years experience in the oil and gas industry.

A highly experienced Manager with exceptional analytical and problem solving skills. A goal oriented professional with the ability to develop effective and efficient teams and lead organizations to achieve aggressive goals.

Drilling consultant Tunisia, offshore Ecuador, the Permian Basin, the US Gulf Coast. Expatriate in Saudi Arabia. Directional Driller for Sperry-Sun. Drilling Supervisor Texaco E & P. Computer literate. B.S. in Petroleum Engineering.

The wellsite supervisor is responsible for directing and co-ordinating all employers at the wellsite to achieve the goals of the work planned by the operator and ensure compliance with all legislation pertaining to that work at the wellsite.

I have 28 years experience in the drilling & completion industry. I have worked as a operations manager, drilling superintendent, drilling consultant, directional & horizontal supervisor. I have 10 years offshore experience. I have hpht, 25000'+, h2s, deviated hole experience

OBJECTIVE To offer total drilling management experience in radial, multi-lateral, horizontal, underbalanced, directional and conventional drilling techniques.

30 yrs oilfield experience, both onshore & offshore working in the Middle East (at present) Libya, Indonesia, Iran, Saudi Arabia and Australia. Have TDS experience and have worked on fully Automatic Rigs. For more information please see full resume.

Mechanical engineer and safety engineer diplomas , I’m looking for a safety position in an oil and gas company worldwide ....available , and able to relocate , preference Africa and Middle east ( UAE, Saudi Arab , Brunie, Qatar, Kuwait , Algeria ...) ,

To obtain a career in the chemical or environmental fields. I have the acquired the experience, education and skills required for a variety of positions.

During 20 plus years of progressively responsible experience in the oil and gas industries, I have worked in many positions, such as transportation, drilling, exploration, production, purchasing, budgeting, and management. In my last position as an Operations Manager.

- Well planning (drilling & completions): casing design, programming, operations supervision – onshore and offshore. - Project management - Expert adviser on wellbore stability and stuck pipe issues. - Quick log interpretation and other wellsite petroleum engineering responsibilities

I have been working in qatar petroleum as senior operator in onshore based

Over 26 years supervisory experience,16 of which are with major foreign oil companies pre-commissioning, commissioning, start-up, operations, training, competency testing, task analysis and procedure generation in the Onshore and Offshore Oil and Gas industry.

Diploma Chemical Engineering. Trained and experienced in Well Operation, Otis Panel, Production & Gathering Station, refinery, petrochemical process operations, Communication skills, Computer education, organizational skills. Giving training to Omani line staff.

8 months running mud motor, 3 years pushing tools, 18 years drilling, 2 years derrickman, 1 year floorhand-certified diesel mechanic

Production Adviser/Relief Superindent: over 20 years exp in the Oil& Gas Industry

Twenty-eight (28) of experience world wide in the drilling of exploration and production wells, also in work-over and completion operations. Looking for either a well site supervisor position or superintendent of operations.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out