Resume - I have over 30 years offshore experience and of those have worked in a senior po...

Misco Jobs

Resume #86274

CONTACT INFORMATION:
View contact information...

CAREER HISTORY:

Frontier Drilling ASA

April 09 to present Rig Superintendent

Drillship, Frontier Discoverer
Newfield NFX, China

Appraisal well drilling and DST appraisals.

Seadrill Deepwater Units

June 07 to April 8th 09 Drilling Section Leader

West Hercules
Husky Energy, China
Drilling Section Leader

* IWCF Certificate #ISS 0995 AU 309 2190 Expires 16/05/2010
* OPITO Huet Sea Survival Certificate #38214 Expires 26/05/2012
* Aker Kvaener, Human machine interface course on AKMH equipment:
* DDM(derrick drilling machine)
* Iron roughnecks
* Pipe racking system
* Off line tubular and casing make up
* Drillview.
* Aker Kvaener course:
* Active heave compensator (AHC)
* Crown mounted drill string compensator (DSC)
* Direct acting riser tensioners (DATS)
* Cameron course:
* Drilling system awareness
* Seadrill training
* Permit to work
* VAM maintenance and procurement system
* TQM total quality management system (procedures)
* TBRA's task based risk analysis
* Working at heights and lifting procedures
*

Frontier Drilling Asia

February 2007 – June 2007 Rig Acceptance Team
Subsea Equipment Installation Supervisor

Frontier Discoverer
Pan United Shipyard, Singapore
Initial hire as Rig Superintendent/OIM but due to Rig contract and working in US water of the coast of Alaska the position has now been filled by an American Citizen.
Moved onto the rig Project team.

Gaz de France

September 2006 – February 2007 Night Drilling Supervisor

Enafor 19, Land Rig, Algeria
Exploration/Deviated Appraisal Wells
Completion work over/Side track

Drilling report software (Peloton Well View)

Reliance Industries

June 2006- August 2006 Night Drilling Supervisor

Discoverer 534, Deepwater Drillship
Reliance headquarters, Mumbai

Assisted Drilling Superintendent and Drilling Engineers with program and equipment for pending drilling program offshore east coast of India.

Due to problems with the rig the program has been delayed till end of year possible Q1 2007, no other positions available at present with Reliance Industries, released from contract.

Daewoo International E&P

November 2005 – May 06 Night Drilling Supervisor

Nan Hai 2, Semi Submersible
Sub Sea appraisal wells
Directional drilling
Well testing
 Communicate to the Drilling Contractor and third party service contractors the work required of them by the Operator, so as to achieve the objectives of the Drilling Program or the work plan;
 Compile daily reports.
 Liaise with the drilling and service contractors. Plan ahead, determine and optimize future requirements for drilling equipment and consumables.
 Report to the Senior Drilling Supervisor on board if the program is changing due to well problems and or equipment problems and plan to accommodate the problems
 Monitor Drilling Contractor and third party that they are working to their HSE programs and assist them to achieve their goals.

Frontier Drilling Asia

April 2005 – November 2005 Rig Superintendent

 Drillship Frontier Duchess
 Oversee the daily operations and duties of the senior supervisors and their maintenance schedules.
 Track and monitor all safety issues with the crews and supervisors daily, and inform management of any major safety concerns and issues.
 Monitor on a daily bases the rig budget activities and warehouse inventory and to maintain rig and company goals.
 Co-ordinate with the operator's representative on the drilling program and pass on relevant information to contractor personnel.
 Area working: Myanmar (Burma).
 Drilling exploration and appraisal wells.
 Risktec: Major Emergency Management MEM completed 18th March 2005.

Transocean

June 2004 – April 2005 Safety Performance Toolpusher

 Semi-submersible: Jim Cunningham and Jack Bates.
 Work very closely with WSM (Well Site Manager) to plan the next phase of the operation, discuss next phase with relevant third party representatives to ensure their equipment is ready to go and procedures are in place.
 To give an independent view of the day-to-day operations and find were improvements could be made for an overall better performance between operator and contractor.
 Report the findings to the OIM and Senior Drilling Supervisor and formulate a plan to discuss them with the crews and Supervisors and upgrade the rig specific procedures.
 Be a focal point for the crews, and encourage any suggestions or idea's to enhance the safety and drilling performance. This can be during pre tour meetings, toolbox talks, safety meetings and any other time or place.
 To be at the worksite at all relevant times, assisting and supervising.

Areas Worked
 Offshore Egypt, deepwater BP
 Offshore Otway Basin, Victoria Australia, deepwater Santos Drilling
 Carnarvon Basin, North West Shelf West Australia, deepwater and Enfield subsea project Woodside Petroleum
 Batch drilling Enfield subsea project, planning open water completions and running FMC subsea trees.

Apache Energy Australia & BHP Billiton Australia

January 2004 – June 2004 HSE Coach

Joint Deepwater Project, West Australia – Semi Submersible: Atwood Eagle

 To be present at pre-tour meetings and any risk assessments.
 To help and encourage the crews with safe working practices.
 To be a focal point for any suggestions that will enhance the safety performance of the rig and personnel.
 To coach people in the best use of the STOP program and relevant safety programs onboard.
 To be at the worksite at all relevant times, assisting and supervising.

Area Worked
 North West Shelf, West Australia

Agipkco, Kazakhstan

November 2003 – December 2003 Well Operations HSE Advisor – Shore Based

 Worked with Agipkco Drilling Manager and his staff to improve HSE and operations with drilling contractors.
 Evaluate emergency response drills and ensure that all personnel are familiar with the Emergency Plan
 Monitor onboard operations with regard to all aspects of safety and to advise Management on safe working practices.

Apache Energy Australia

June 2003 – November 2003 Night Drilling Supervisor

 Jack up Ensco 56.
 Communicate to the Drilling Contractor and third party service contractors the work required of them by the Operator, so as to achieve the objectives of the Drilling Program or the work plan.
 Compile daily reports using the DIMS software.
 Liaise with the drilling and service contractors. Plan ahead, determine and optimize future requirements for drilling equipment and consumables.
 Report to the Senior Drilling Supervisor on board if the program is changing due to well problems and or equipment problems and plan to accommodate the problems.
 Monitor Drilling Contractor and third party that they are working to their HSE programs and assist them to achieve their goals.

Areas Worked
 Carnarvon Basin West Australia exploration and appraisal wells in water depths from 8M to 50M, well depths to 3000M.
 Work over and development on platforms.
 Exploration and appraisal wells using auto track steerable systems and OBM.

Transocean

December 2000 – June 2003 OIM
Relieving Rig Manager

 Semi submersible: Actinia
 Oversee the daily operations and duties of the senior supervisors and their maintenance schedules.
 Track and monitor all safety issues with the crews and supervisors daily, and inform management of any major safety concerns and issues.
 Monitor on a daily bases the rig budget activities and warehouse inventory and to maintain rig and company goals.
 Co-ordinate with the operator's representative on the drilling program and pass on relevant information to contractor personnel.

Areas Worked
 Spain, Malta, Tunisia and Egypt
 Repsol YPF, Spain; The development of the Chiperon subsea completion and tie back to Casablanca platform was performed with Cameron trees and equipment.
 Malta and Tunisia; Exploration and appraisal wells in water depths from 100m to 550m
 Egypt IEOC; Exploration and appraisal wells offshore Port Said

Transocean Sedco Forex

April 1996 – December 2000 Rig Superintendent/OIM

 Semi Submersible: Sedco 708
 Oversee the daily operations and duties of the senior supervisors and their maintenance schedules.
 Track and monitor all safety issues with the crews and supervisors daily, and inform management of any major safety concerns and issues.
 Monitor on a daily bases the rig budget activities and warehouse inventory and to maintain rig and company goals.
 Co-ordinate with the operator's representative on the drilling program and pass on relevant information to contractor personnel.

Areas Worked
 Angola, Cabinda Gulf

History
 Set 12 well subsea templates in 150M water, drilled all wells directional and horizontal for future platform and development.
 Exploration on block 15 working in 300M to 400M of water, three new discoveries and appraisal drilling.
 Completed the Kuito subsea project, this consisted of batch drilling all 12 wells horizontal and deviated wells to TD.
 Batch ran Vetco subsea trees and completed the wells; all wells completed with chrome tubing, Halliburton frac and gravel pac.
 The rig run all the flow lines and control lines from all subsea trees to the manifold.
 The Sedco 708 was moored on the Kuito field using a preset mooring system to allow it to maneuver safety over each well.
 The project was completed before schedule and under budget and to add to the success of the project there were no major incidents and or LTA's.

Maersk Drilling

1995 – 1996 Driller

 Floating production vessel Nanhai Tiao Zhan, South China Sea.
 Maersk Drilling had the labor contract and were working for Amoco on the Luihai 1-11 subsea development and completion field in the South China Sea.
 The operation consisted of running all the subsea wellhead bases, drill the horizontal well complete and run the subsea tree.
 Assisted in running all the subsea umbilical control lines for production with ROV operator.
 All completions were run with reda submersible pumps and controls.

Diamond Offshore

1988 – 1995 Driller/Rig Superintendent

 Semi submersibles Ocean Epoch, Ocean General and Ocean Bounty.
 Consult with Operators Drilling Supervisor on drilling operations and ongoing operations.

Areas Worked
 West and East coast of Australia, exploration and appraisal drilling in water depths from 200M to 500M.

Semi Submersible, Ocean Bounty, Australia

February 1994 – March 1994 Toolpusher

Equipment worked with
 National 12-P-160 Mud Pumps
 Varco TDS-4 S Top Drive
 Varco RBS System
Achievements:
Well Control Certification
Advanced Stability and Ballast Control Courses at the Diamond Offshore Training School
Varco Top Drive and B.J. Drilling System Course, Singapore
Stop Safety Training Observation program

Semi Submersible, Diamond M. General, Australia

June 1988 – February 1990 Driller
February 1990 – June 1990 Toolpusher

Equipment worked with
 Oilwell E 3000 Drawworks
 Oilwell Ap-1700 Mud Pumps
 Vetco Motion Compensator
 Varco TDS-4 Top Drive
 Varco RBS System

Sedco Forex

Semi Submersible – 708 Australia

January 1988 – June 1988 Driller

Drilled - Timor Sea for B.H.P.
 Equipment worked with
 Oilwell E 3000 Drawworks
 Oilwell AP-1700 Slush Pumps
 NL Shaffer Motion Compensator
 Cameron 18 ¾ BOP
 Baylor Scr. Drillers Consol.


Martech Ocean Systems, Australia

1987 – 1988 Driller on Drillship
Toolpusher on Jack Up
Jackup Rig (Hykuru 8)
Drillship (Energy Searcher)

Equipment worked with Jackup
 National 1625 DE Drawworks
 National 12-P-160 Slush Pumps
 Mitsubishi Elect Cranes
 Mitsubishi Scr. And Drillers consol
 Mitsubishi Jacking System
 Cameron Type U BOP and Koomey BOP Accumulator System
 Serviced Rig from Stack Mod. To Drilling Mod.

Equipment worked with drillship
 Gardner Denver 3000 E Drawworks
 Gardner Denver PZ-11 Slush Pumps
 NL Shaffer Motion Compensator
 Cameron 18 ¾ BOP
 Drilled in Timor Sea for B.H.P.

Westbridge Drilling Company

July 1987 – November 1987 Toolpusher

Land Rig 220 Australia.
Drilled on Lowendal Island for Bond Pet.

Equipment worked with
 National 80-UE Drawworks
 National 27 ½ Chain Driven Rotary
 National 8-80 Slush Pumps

Global Marine Drilling Company, Australia

June 1982 – December 1983 Driller
December 1983 – October 1985 Toolpusher
Jackup – Glomar Main Pass 3 Australia

Drilled – West Coast Australia
Arafura Sea Bonaparte Gulf

Equipment worked with:
 National 1625 De Drawworks
 National 12-P-160 Triplex Slush Pump
 National Rig Jacking System
 Ross Hill Scr. Drillers Consol
 Halliburton Cementing Unit
 Surface Cameron Type U BOP and
 Hydril Diverter System
 Type 80 Koomey BOP Accumulator System
 National Cranes.

Achievements with Global Marine
 Brat – Well Control School Sept. 1982
 University of Queensland Aust.
 Dept. Of Mining and Metallurgical Engineering
 Well Control 1983
 Supervisory Effectiveness Training Program – Global Marine Training Centre 1982
 Global Marine Drillers O.J.T. March 1983
 St. Johns Ambulance Assoc. Short Course in Basic Life Support Sept. 1983
 Global Marine Jackup Stability Sept. 1984
 U.S. Merchant Marines Document for an Able Seaman, Lifeboatman Sept. 1984
 International Drilling School – Well Control Course July 1985

Global Marine Drilling Company, International

October 1985 – March 1987 Toolpusher

Jackup Glomar Main Pass 3

Area's drilled
Java Sea, Malacca Straight INDONESIA.
Achievements
Well Control Course at the University of Queensland.

Petromarine Drilling Company

November 1981 – June 1982

Driller/Toolpusher

Drillship – Petromar North Sea

Drilled – Bass Strait and West Coast Australia.

Equipment worked with
 National 1625 De Drawworks
 National 12-P-160 Triplex Slush Pump
 Western Gear Motion Compensator
 Lay down Pipe racking system
 General Elect. Scr. Drillers Consol
 Vetco Subsea System
 Halliburton Cementing Unit
 Link Belt Cranes.
Atwood Oceanics

January 1977 – August 1977 Floorman
August 1977 – December 1978 Derrickman
December 1978 – June 1979 Assistant Driller
June 1979 – November 1981 Driller

Drillship – Regional Endeavour. North West shelf

Equipment worked with:
 National 1320 UE Drawworks
 National 12-P-160 Triplex Slush Pump
 B.J. Pipe Racking System
 B.J. Cementing Unit
 General Elect. Scr. Drillers Consol
 Vetco Motion Compensator
 Vetco Subsea System

Achievements during my term with –Atwood Oceanics

 IMCO SERVICES
 Well Control School Oct. 1979
 SANTA FE DRILLING CO.
 Well Control School Jan. 1979
 University of Queensland Aust.
 Dept. Of Mining & Metallurgical Eng.
 Well Control School on a Digitran
 Rig Floor Simulator July 1981
 Industrial Foundation for Accident Prevention
 Course Nov. 1980

Atwood Oceanics

October 1975 – December 1975 Floorman

Drillship Regional Endeavour. Drilled – East Coast of Australia and Bass Strait.

Salveson Offshore Drilling Co

January 1975 – October 1975 Roustabout/Floorman

Drillship Dalmahoy. Drilled – West Coast of Australia.

TRAINING AND CERTIFICATES:

IWCF Certificate #ISS 0339 AU 3081375 Expires 16/05/2010
OPITO Huet Sea Survival Certificate #093701204 Expires 26/05/2012
Risktec: Major Emergency Management (MEM) completed 18th Mar 05
Diamond Offshore permit to work system.
ODCAA Well Control School (IADC Approved)
Hazard Awareness Course
Helicopter Survival Course (HUET)
Job Safety Analysis Course
H2s training
Fire fighting and BA training.
Stability/Ballast control training

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 2718)

Go to Search Parameters...

Brief Description

To provide leadership and capacity-growth in E&P Consulting (Technical Support Operations & Business Development) using cutting-edge Applications-technology skills, Information Technology & Information Management.

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

I have over 30 years offshore experience and of those have worked in a senior position 25+ years, have worked in a senior position on some large scale sub sea completions worldwide, I have very good equipment knowledge and are looking for a shore base position with logistics or projects.

Over 35 years Drilling, Africa, ME, Russia, USA

SUMMARY I have been involved in the Drilling and Work over Industry for the past 26 years. With experience on Tender and Drill Ship & land rigs, both Mechanical and Electrical, ranging from 6,000 to 20,000 feet, as well as Sea crest and

Senior HSE advisor

I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

I am a Master Mariner, presently serving as Senior Master on Crude/Product Oil Tankers of Dynacom Tankers Management

Highly motivted, energetic,and judicious professional looking for employment with diversified corporation for long term employment. Strong attributes include proficiency and multi-tasking. Able to respond to global assignments and enjoy working in a multi-cultural environment.

OHSAS 18001, ISO 9000, ISO 14001, Operation troubles shootings DCS Control room operations. Plant start up & shut down activities.

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Presently working on board a Jack-up rig in Qatar (Noble Rig) since October, 2007 as SAFETY TRAINING SUPERVISOR (STS). 11 months worked on board same Jack-up rig in Qatar Offshore (Noble Rig) as Radio Operator / Trainee Safety Officer.Passed with Credit, NEBOSH INTERNATIONAL GENERALC

Piping Superintendent/Supervisor/Field engineer (PMT preference) Civil Engineering Diploma

Working as a field operator in NGL Fractionation Unit , Gas treating unit by MDEA, regeneration of amine and SRU Claus Process Unit for precommissioning, commissioning start up and operation. Operating knowledge of pressure and atmospheric distillation, furnaces for sulphur production, amine

Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.

20 Years in Land seismics as field Geophysicist, assistant crew manager and Instructor

rig manager / toolpusher

Horz. Under balance Drilling is my best value.

Bachelor of Science(chemical) /Diploma in Industrial Safety/Diploma in Process control and Instrumentation

Over ten (10) years of extensive hands-on and supervisory experience in Operations and Maintenance, control and optimization of plant equipments, systems and procedures, control room and local operations of Diesel Power Plants operating through PLC - programmable logic controller. (Wartsila 18V32

Operation manager/Coordinator Fluids

sr mechanical engineer

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Lease Operator with 20+ years experience in Oil and Gas Operations.

I´m WSG, I´d worked in Mud logging services & Geochem Lab in Brazil more than 8 years, my last 3 years working in Argentina as WSG

28 safe years in the oi and gas/petrochemical industries. Worked in commissioning jobs throughout Canada and I am seeking an international placement with 28/28 rotation onshore

iadc certified drilling supervisor with 25 years experience in the oil & gas industry. Strong knowledge of all aspects of drilling in both horizontail & verical wells

My skills as a drilling foreman are Drilling, Work Over, Completion and Safety. I have 40 years of oilfield experience. I have an up to date Well Control Certification.

Looking for and Field Operating Position / Production Coordinator, Can also Well Service

I am writing to your goodselves wishing a reply to my present request. I would like to apply for the post of Production Operator or any other Board man . I enclose my resume with the name of referees.

Power plant project, O&M professional

12 plus years experience in the operation of various Hydrocarbon processing units located offshore (production platforms, and FPSO) and EPC company. My current position is that of Snr. Production Operations Lead with Sunlink Petroleum

I am a Mechanical Engineer from Madras University in the year 1981. I have over 18 years of Offshore oil fields experience in production Operations of oil & gas and water injection.

Experienced in land operations on small and large rigs. Team player. Works well in simultaneous operations to maximize results for the client. Speaks Spanish as well as mother language of English.

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Safe, Reliable, Cost effective Supervision with 23 years experience

Hands-on Operational Management of Exploration & Development activities using Best Practices and BPI management skills.

Field Superintendent / Projects Start-up Leader with 30 years experience in onshore and offshore oil and gas production operations. Experience gained in working for major Oil Companies covering surface production operations, planning and training aspects

I have high energy level and eager to learn new skills ,I am very organized person and in my entire job I have organized my activity and other people activity.I can take responsibilities ,I am a customer focused and I have always met my deadlines.

Gas Plant Operator, Process Operator , Control Room Operator

Drilling supervision 13 yrs, 2 yrs DST, 16 yrs rig experince,12 yrs drlg. HPHT to 5000 m, short radius to long reach hz wells,cementing, fishing,coring,side tracks,re entries,tool setting,well control, sour to critical Sour 20%,Exp in completions,Supervision in Guatemala,Sudan,Nigeria,India,Canada.

Highly skilled and client motivated commissioning/operations technician able to work to Superintendent level and oversee many different nationalities of staff.

34 years in oil industry, toolpush and wellsite supervisor

Visionary professional with 11 years Operation experience in Oil and Gas plant, Petrochemical and Cryogenic plants

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

dcs panel operation for terminal and plant

Oil and Gas Production Operator, Lead Operator, workovers, Construction,inspections, repairs, trouble shooting, meter calibration, azcom, Hazmat, Confined spaces, Firefigting, water susvival, T-2, Dot, elicopter afety and fueling

I have a good management skills and experiences in various areas of operations. I am particularly aware of the Operation / construction / Commissioning and start up for Oil and Gas industries.

Over Fourteen and half years of experience in Petroleum Refining & downstream process, Petrochemicals and Chemicals in the Field of Continuous Process plant Operations, Troubleshooting and Commissioning. Well versed in Normal Operation and Unit revamps, Gross root & Expansion of Crude Refinery Erect

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out