Resume - 12 years of experience in operating the Petrochemical and Oil & Gas Plants.My Ex...

Misco Jobs

Resume #87355

CONTACT INFORMATION:
View contact information...

POSITIONS HELD
NAME OF THE EMPLOYER
ADMA - OPCO: ABUDHBI MARINE OPERATING
(FROM JUNE 2005) COMPANY OFF-SHORE (ADMA-OPCO), ABU DHABI - THROUGH ALMELEHY CONTRACT
PREVIOUS ASSIGNMENT
SOUTHERN PETRO CHEMICAL INDUSTRIES CORPORATIONS LIMITED.,(SPIC)
(JAN.1996 TO MAY 2005): Process plant Operator and Senior Operator in On-shore
Oil/gas treatment Plant ¡V SPIC (Ammonia Plant).

SKILLS
* Best Near Miss Award on May 2006 by ADMA-OPCO
* HSE champion on August 2006 by ADMA-OPCO
* Best Near Miss Award on January 2007 by ADMA-OPCO
* Certificate of Achievement for Achieving 2005 HSE KPIs
* HSE performance excellence certificate for 1000 days without LTA
* Certificate of Recognition by the General Manager in appreciation of the contribution towards the entry in ADNOC HSE AWARD 2006
* Award given by the Management in recognition of outstanding contribution in professionally challenging the critical situation of the compressor bellow leak
ABUDHABI MARINE OPERATING COMPANY ¡V OFFSHORE
Abu Dhabi Marine Operating Company Situated at Lower Zakum field of Abu Dhabi offshore. ADMA ¡V OPCO is producing 365MBD of crude oil. The Oil & Gas mixture is separated in six numbers of horizontal separators. The separated oil is pumped to the shore. The gas is compressed in Gas Compression Platform and then sent to Gas injection wells.
My experience is in Separator Platform and Gas Compression and Treatment platform at field &control room. Our DCS system is Bailey infi90.
SEPERATOR PLATFORM
Producing 360000 Barrels per day of oil
Plant is controlled from local control room by DCS.
GAS COMPRESSION AND TREATMENT PLATFORM
300MMSCFD of natural gas separated from the separators is compressed by three centrifugal compressors which are driven by Avon Gas Generator. The gas is cooled upto -15 deg. C to remove water content and condensate (liquid hydrocarbon) before exporting the gas. The chilling of the gas is achieved by the propane refrigeration system. The water is absorbed by Mono Ethylene Glycol system. The condensate is separated in the condensate stripper. Hot oil is used to recover the waste heat from the Gas Generator exhaust flue gas. This hot oil is circulated through the Glycol reboiler and the condensate stripping reboiler.
EQUIPMENTS HANDLED IN ADMA OPCO
o Rolls Royce gas turbine driven power generator (2 sets of each 12.8 mw)
o Rolls Royce gas turbine driven ELLIOT centrifugal compression system with discharge pressure of 1200 Psig.
o Motor driven centrifugal Propane refrigeration compressors ¡V Make: De Laval stork.
o Hot oil storage / distribution.
o MEG injection and recovery system.
o Condensate recovery and stripping tower system.
o Closed drain system.
o Three phase separators / chillers / reciprocating and centrifugal pumps.
o Fuel gas scrubber system & Flare knock out system
SPIC ¡V AMMONIA PLANT
I have worked as an Operator in the Naphtha based Ammonia Plant, is designed to produce Anhydrous Ammonia on total energy concept using Naphtha ¡V Steam reforming process. Production capacity is 1200 T/ Day.
OIL STORAGE (TANK FARM) FLOATING ROOF - Pantoon type tanks
This section consists of 5 tanks for storing naphtha and 2 tanks for storing furnace oil.
I am well versed with all safety aspects (Foam pourer, water sprinklers) and fire fighting technologies in the area.
DESULFURIZATION UNIT
Sulphur in the raw naphtha is reduced from 1500 ppm to 0.5 ppm. Cobalt-Molybdenum oxide is the catalyst (Comox). Design capacity is 27 T/Hr. Two reciprocating H2 Compressors, Fired Heaters, condense separators, Distillation column with Reboiler and Reflux systems are used in this unit.
REFORMER UNIT
Catalytic Steam reforming section is designed to produce a mixture of gases containing H2, CO2, CO, CH4 and H2O at the rate of 26.5 T/Hr. There are 264 tubes (8 rows of 33 tubes) and 90 burners in 9 rows in reformer. Furnace is a top fire furnace, operated at ¡V1.85mmwc. 2 sets of ID/FD fans are used to giving combustion air to reformer and maintaining ¡Vve pressure. Metallic Nickel is the catalyst for reforming.
COMPRESSOR UNIT
Our Ammonia Plant is housed with three centrifugal compressors which together handles various gases catering to the needs of the plant. The prime mover for these compressors is steam turbine.
„« Process air Compressor (PAC) of capacity 44, 800 Nm3/Hr
„« Loop refrigeration Compressor (LRC) of capacity 56,724 Nm3/Hr
„« Synthesis gas Compressor (SGC) of capacity 1,30,522 Nm3/Hr and a recirculator of capacity 5,30,000 Nm3/Hr
PAC is meant for supplying process air to the system. LRC takes care of Refrigeration Jobs in the synthesis area. SGC Handles synthesis gas for ammonia production. The syngas and loop refrigeration Compressors have seal oil system to effect perfect shaft sealing.

SAFETY
* HAZOP STUDY TEAM - Member of Hazop Study Team. Identified all the hazard potentials in the plant and make suggestions to rectify the conditions. Carrying out planned inspections and safety tours.
* TRIP DRILL ¡V Once in two months trip drill is conducted to ensure the efficiency of the operator to act fast in emergency.
* MOCK DRILL ¡V Once in three months safety mock drill is conducted. Officials will inform a dangerous condition in our are and they will declare emergency. All the personnel will handle the situation efficiently, quickly and properly.
* SAFETY PROCEDURES ¡V Well experienced in handing over any equipment for maintenance in a SAFE WAY knowing all procedures like ELECTRICAL CLEARANCE, isolation, flushing, purging etc.
* Good experience in following all safety procedures to be followed during Vessel Entry, Hot work like welding, cutting, high elevation job, and excavation jobs etc.
* Having good knowledge about LEL & HEL of various chemicals.
* Well trained in using H2S detectors, Gas monitors.
* PTW SYSTEM ¡V Experienced in preparation, issuing and following up of permit systems for Hot work, Cold work, Vessel Entry, work etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 2725)

Go to Search Parameters...

Brief Description

A skilled engineer with both practical and managerial skills, gained through many years experience of supervising staff including apprentices and trainees. An outgoing, down-to-earth person who enjoys being involved with whatever is going on, and has encountered and solved many problems.

A Registered Electrical Engineer with more than 8 yrs. work experience in the field of engineering in Power Generation as Operation Staff. A computer literate in Windows applications and DCS interface software. Attend in various training and seminars both local and overseas.

I work at the Valero Aruba Refinery as an Operation Shift Supervisor,Crude Oil Distillation, Gas Oil Fractionation, Gas Plant Splitters, Visbreaker/Vacuum Flasher, Hydrogen production, Hydro Treaters, DCS-control systems (Honeywell),Project/Turn-around start-up and shut-down

HSE Supervisor/ DP operator/ HLO/ Chief officer

Technical diploma holder; 20 yrs exp in power, oil /gas & utility field

18 year experience in drilling and workover operation. Land / Desert areas seeks for night supervisor position

Remote Site Expert : Global Experience.

Having five years of FPSO Operations (as Operations Manager) experience in Nigeria. Always took new challenges at it’s own priority and keep good relations with the Client and crew. I believe good team work will give good results to optimize all the constraints.

16 year experience in gases industry in process operation , diploma in assosiate engineer in chemical technology

Master Foreign Going Class 1(UK) Certificate of Competency with 20 years experience in oil and gas industry. Experience as Marine Operations Supervisor, Barge Master, CSR with Sarawak Shell

12 years of experience in operating the Petrochemical and Oil & Gas Plants.My Experience involves Hydro desulphurisation unit,Tank farm,Steam Naphtha Reforming,Acid Gas removal,SynGasCompressor,LoopRefrigerationCompressor,HighPressureWaterTube Boilers, SteamTurbines,GasTurbines,Threephase Separator

Working as a Log Analyst on Petrophysical data processing. Total relavant experiance is 3 years

Drilling Supervisor, Engineer, Wellsite Engineer, HPHT, H2S, Well Control, Mud Loss, Fishing...

Operate Plant equipment in a safe and Efficient Manner.

Area In charge of Hydrotreater section. 5-years DCS EXPIRINCE

Marine Operation Manager, Marine Superintendent , DSV Operation Manager

An Accredited Safety Consultant for seven (7) years of Bureau of Working Conditions / Department of labor and Employment and one of the staff of Safety Consulting firm which provide our client (Government & private firm) Safety training & education, Safety inspection & audit, accident investigation.

A Senior Facilities Coordinator with wide experience in operating and maintaining Gas pipe line networks and Gas Control Station. Skilled at learning new concepts quickly, working well under pressure and

Designation - Terminal Operator/ Loading Master. In a Terminal having 1.3 million cubic meter capacity with five phase Tank farms (50nos), three manifolds, Hot oil units, Tel blending plant, Truck loading station, SPM & Four berthing Jetties.

Strong business skills having developed over 20 years of progressive advancement in the Western Canadian Sedimentary Basin. Equally strong people skills developed through strong commitment to make people feel valued and contributors.

education associates degree petroleum production technology apprenticeship industrial compression and restricted c class electrical license 20 years experience in drilling and production of oil and gas operations includes maintenance on gas compression

Post Graduate Degree in Chemistry with 13 years of experience in Petrochemical, Oil and Gas complex as a Lab chemist in QC Lab.

Resume 2009 Technical purchasing support for Louisiana manufacturing facility for fabricated and machined parts.

operations

Completed my degree of M.Tech. (Applied Geophysics) in july,2006. Have a good experience of Seismic Data acquisition & In-field Data processing for three years. Interested to work in a creative and challenging environment using seismic technologies.

I have 13 years experience in the drilling industry, the last 3 of which as a Directional Driller.

Deep Water Marine Construction, ROV Intervention, Platform Assist, Pipeline Inspections, Bathymetric Surveys, Asbuilt Surveys, Jacket & Template Orientation, SubSea Risers/Trees/BOP/Manifolds, TLP & Spur Platforms Installation, Hazardous & Nuclear Waste, Recovery & Insurance Investigations

26 years working exprience in the oil refinery in Singapore as Refinery Shift Manager

Project engineering which involves inspection of instruments like control valves, on off valves, valve actuators, various type of analyzers etc.

I am a Mechanical Engineer with 13 Yrs Experience in Petrochemical & Refinery Maintenance. Presently working in Kuwait National Petroleum Company Kuwait as Rotating Equipment Engineer. I can handle Maintenance, Planning, Projects, Purchase, Inventory control positions effectively.

Graduate Engineer, MBA, 32 years experience, high pressure gas testing and commissioning. Organiser and team leader.

I was a chemical engineer, and had been engaged in plant operations in oil/gas industry in China since 1982 when graduated from University of Petroleum (East China).

I am M.Sc in Chemistry (Equal to Chemical Engineer) getting 2nd position in the University of Sind Jamshoro. I am a Production Tech. with extensive experience in Different companies like Fertilizer, Petrochemical, Oil and Gas. I have 10 years of experience

I have expert level knowledge of distillation, Diethanol amine contractor, Glycol dehydration unit, Adsorber's, Effluent treatment plant, High pressure Gas Compressor, Intermediate pressure Gas Compressor, low pressure Gas Compressor, High pressure Separator, low pressure Separator, Heater treater.

13+ years of oil and gas, telecom and pipeline experience as professional landman and broker. 1994 graduate of Regent Univ. School of Law.

Procurement professioal, sales, purchasing, inventory control

Chief Navigator onboard seismic vessel mainly using EIVA Navipac and Concept Spectra

Engineer / MBA with 17 yrs exp in oil & gas, LPG Industry

Objective: To work as a Crane Operator. Profile: Maintain safety workplace/Effectively resolve problems & manage crews/Expedite the achievement of company projects (procedures & specifications)& to effectively contribute toward company goals/Ability to think critically as situations develop/ change

Working Experience at both Onshore & Offshore (production operator)

I've been 18 years experience in Petrochemical and Oil&Gas and my position now is Operation Foreman for Petrodar Operating Company in Republic of Sudan in Oil & Gas company. My responsibilities are to manage the operation of crude oil production which is daily capacity 200,000bbl/day.

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

I have a Batchelors Degree in Electrical/Electronic Engineering with over 5years of working experience.Have sound knowledge and skills in warehousing,Inventory control and materials logistics. Familiar with all types of drilling equipment, spares, tools handling and storage.

Involved in Plant Operations both Process and Utillity Operations of the Pant

Large Water treatment plant like RO plant, DM Plant, Ultra filtration plant, Pretreatment plant Operation, Maintenance and analysis. Large Power plant Boiler(High Pressure Boilers) Water Chemical Treatment and Analysis, Cooling Tower water chemical treatment and analysis, Environmental(Ambient air,

HSE / SAFETY SPECIALIST

LNG operation ,,oil and gas Operation , operator

Chemical Engineer with 10 years experience working with Reliance Industries Ltd

Skills -operator rotary, derikk,mecanic pump hidraulic fluid,electrical -electronic

34 Years of Inland and Offshore Inspection and Project Co-Odination

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out