Resume - Toopusher, Rig manager, Drilling Supervisor, Directional Driller

Misco Jobs

Resume #87546

CONTACT INFORMATION:
View contact information...

Personal Information:

Marital status: Married,two children
Nationality: Romanian
Licence driving: yes
Criminal recorder: without
Education High School Onesti type of degree: mechanic
Petroleum and Gas University- Ploiesti type of degree: Drilling Engineer
Training: I.W.C.F. – Drilling Supervisor Certificate

Managing Wellsite Operations – PetroSkills: OGCI
-Lost circulation Technology: MI Swaco
H2S
-Specialist Directional Driller: SugarLand,Houston
ADS-PowerDrive,Exeed: SugarLand,Houston
DD2 in SugarLand,Huston: SugarLand,Houston
English language ability: well,Italian beginner

Personal Activity: Responsibilities

July 2007 – Present: Directional Driller -Schlumberger

Directional Drilling with Steerable PowerPak,,Powerdrive,Power V,Exceed all type of wells: S,J,Orizontal
Sidetrack the well with PPak & PD,Whipstock

2007 – July: Gulf Drilling International-Qatar,Toolpusher
Duties, direct charge:
-Supervise the execution of drilling
-Optimisation of drilling parameters
-Checking for security rules and B.O.P.regulation
-General monitoring for the drilling rig regarding: drilling parameter
-Dismountling – transport – mountling drilling rig
-Management of the drilling crew
- General monitoring for the drilling rig regarding: drilling parameters
Drilling a horizontal wells in the upper Arab C reservoir(11500 ft MD & 6337.5 ft TVD) by Baker Hughes Inteq directional drilling company and wireline loging by Schlumberger.
Rig - National Oilwell with Top Drive technology
Drilling,Completition Program:

- 26" Hole vertical for 20" conductor pipe
- 17-1/2" Hole vertical to 13 3/8" casing point at 1796' by the 17 ½" bit and slick BHA;Run Singleshot
Survey(by self) every 500' while drop Multishot Survey before Pooh for casing.
- 12 ¼" Hole vertical,Rih with 12 ¼" Steerable assembly and drill ahead to KOP at 5112'(run Single shot Survey every 500' ant maintend 2.5 degree angle by control drilling parameter,cont Drill ahead to 9 5/8" casing point into Sulay formation at 5493'.
- 8 ½" Build up hole section,RIH with 8 ½" PDC Bit on Steerable BHA cont drilling to 7120'MD(6361' TVD),R/u Schlumberger and Run PEX(NUC)HRLA on TLC;RIH with Bullnose-NBRR-2x5" HWDP-STB ¼"UG and Ream tight hole for RIH 7" casing.
- 6 1/8" Hole Horizontal,RIH with 6 1/8" Bit on 1.5 degree Steerable BHA with stabilized LWD,cont drilling to 11500';Rih with 6 1/8 Bit and string mill and spaced out Casing Scraper
- Completion Program: Is to complete the well with 2 7/8" PC tubing, 2 7/8" x & " Packer and 3 ½" PC tubing PWI Completition above Upper Arab C horizontal open hole.

2006-2007: Petrom group OMV - Drilling Supervisor
Duties, direct charge:
- Responsabile for the day-to-day site planning and execution of drilling activities,maintaining maximum HSE and operational efficiency,at maximum value in terms of cost versus benefits.
- Supervise the execution of drilling
- Supervise the drilling contractors and service personnel to ensure all work performed conform to safety,quality and highest value requirement and in accordance the well programme.
- Ensuring full compliance with Health,Safety and Environmental(HSE) policy standards and objectives.
- Delivering high quality and cost-effective wells according to approved well programs
- Managing the interface with over company asset
2005-2006: Foserco - Assistant Rig Manager in Republic of Kazakhstan
Duties, direct charge:
-Supervise the execution of drilling
-Optimisation of drilling parameters
-Checking for security rules and B.O.P.regulation
-General monitoring for the drilling rig regarding drilling parameter
- Management of the drilling crew
2001- 2005 Borzesti: Petroleum Engineer
Duties, direct charge:
-Offer specialised assistance to the operational personal in realizing the fabricational programme
-Verify and account for the modification of the technological parameters
-Coordonate,supervise and make decision for the reduction of energy and raw material
-Supervise the technological programme and fulfilling of production tacks in accordance with the established production schedule
1997 – 2001: Foserco S.A. TG.Ocna – Rig manager
Duties, direct in charge:
-Checking for all drilling operations
-Optimisation of drilling parameters
-Checking for security rules and B.O.P.regulation
-Assuring permenent control and communications with head quarter regarding: techical programmes,general monitoring,dinamic of drilling,daily reports
-Direct responsabilities for the special operations: casing in,cementing jobs,fishing jobs,bring in a well

-Dismountling – transport – mountling drilling rig
-Management of the drilling crew
-General monitoring for the drilling rig regarding drilling parameters

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 2718)

Go to Search Parameters...

Brief Description

WELL COMPLETIONS AND TESTING ENGINEER

Long skills for work-over & completion well site supervisor , coiled tubing & snubbing too

Experienced Well site & Ops Geologist. Adaptable, strong inter-personal & communication skills, multi-disciplinary team worker. Follow up Operations Geology activity for Operated & Non-Operated assets, supporting Drilling & Completion. Can work independently with minimal supervision. B.Sc, Geology

Marine Pilot/ Mooring Master/ Loading Master

A result-oriented and talented professional with an extensive experience 26 years in the oil & gas industry . Expertise in commissioning, DCS control room operations, oil refining processing , crude oil & gas processing, oil & gas operational environment.

Rig Manager/ Drilling Superintendent/ Drilling Supervisor.

Mechanical Engineer with expirience in Operation and maintenance. Can operates Forklift and Superstacker (Bureau Veritas Certified), Driving, Computer Literate, Auto cad.

Seeking senior level assignments in Plant Operations, Project Management, Operations & Maintenance and Installation & Commissioning with a reputed organization.

Working as a field operator now. Worked as a pre-commissioning, commisiioning operator and as a chemist also.Pre-commissioning, commissioning activities, start up and shut down activities also.

Experienced exploration/wellsite geologist

B.Sc. Chemistry degree and having 25 years experience in petrochemicals and refinery in process department

Job Responsibility: Quality Control laboratory which involves in testing of crude oil, produced water, produced gas, potable water & Scales using ASTM, API, APHA methods. Injection Water Quality checks for Particle count (Coulter Counter), Dissolved oxygen (Orbisphere meter), Free Chlorine, Corrosi

Oil and Gas Operations Mnagement

20 years experience in drilling operations

Thorough Knowledge of operation of Laboratory sophisticated instruments like XRF,GC,HPLC,UV Spectrophotometer, FTIR, MFR Tester, K.F titrator, Hunter Lab Colorimeter, Cast Film Extruder, Blown Film Extruder, Density Gradient Column, D.S.C, Capillary Rheometer etc.

Posses degree in Geology. Familiar with Microsoft Work, Excel, Power Point, Project , Landmark Geosciences Workstation(Good), Petrel (Good), Well Kill Sheet Program(Good), Drill bit hydraulic software(very good), Mud logging software setup(good) and trouble shooting.

22 years oilfield experience. High pressure, horizontal pumpdown experience. Experience with both Open Hole and Cased Hole Logging and Perforating. 2.5 years overseas.

Bachelors degree in science,Diploma in industrial safety,Diploma in petroleum refining engineering and 20 years of experience in chemical plant operation

Over 25 years of various experience in On shore petrochemicals(India), Off shore/on shore oil and Gas field in Dolphin Energy Qatar (A Total + Oxy joint Venture Company), ZADCO,UAE and Gas processing(Qchem –A Chevron group company) complex in Qatar.

production operations,pre-commissioning,commissioning and start-up, mentoring and training,28 years international experience

Global Strategic Sourcing / Materials / Logistics / Procurement / Cross-Functional Teams / International

I am a B.Sc. Chemical Engineering Graduate and also having Diploma in Chemical Technology holder and over Twenty (21) years of experience in DCS PANEL and Field operations. I had held Supervisory position in India for nine years. I am fully conversant with Process Operations and Control procedures.

Master FG Cert of competency

I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 16 research publications in National and International reputed Journals. I have Completed 3 major Research Projects sponsored by D.S.T. (Department of Science and Technol

Science graduate with extensive Supervisory experience in Ammonia and Petrochemical (NAO, Ethylene/Sulfur and Formaldehyde) Plant operations/training. With having over 23 years in operations, comfortable working as Supervisor/ Training coach/Co-ordinator/DCS operation, ready to join immediately.

i attended petroleum institute nigeria after my school certificate i had ond in petroleum refining technology and higher diploma in chemical technology i worked in nnpc refineries in porthacourt warri and kaduna i can also work in petrocheical and gas processing plants

Experience in foxboro and bailey DCS panel operation . i am working as panel operator in a big oilfield control room since 1993, i am the most suitable candidate for this post

Master mariner class 1 unltd, over 8 years command experince onboard large crude carriers. Over 40 spm mooring ops at various terminals including Lybia. Willing to gain expertise as mooring master in offshore oil industry.

I have high experience as production supervision at manufacture plants.

SENIOR PANEL OPERATOR POSITION FOR PRODUCT TANK / JETTY AREA.

Highly experienced and successful management professional with a demonstrable record of accomplishment; currently seeking a challenging role, within a multi national environment. Offer a range of transferable skills within the areas of strategic management, business process re-engineering, etc

Certified Production & Inventory Management professional

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry.

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

Had 27 years of work experience on Commissioning, Start-up and Operation of numerous Oil/Gas Production facilities, Petro-chemical, Chemical and Power Plants. Currently working as Operation Support/Pre-Start up Safety Coordinator in Oil/Gas/Sulphur Plant plus almost 7 years of Supervisory position

Managing Oil Field Operation and maintain high safety and low budget operation. FPSO Project Engineering.

Versatile mechanical engineer within the oil and gas industry

Senior Petroleum Engineer, 20 years experience in petroleum engineering. Areas of interest: Well test analysis. Production optimization & forecast. Productions operations Work over & completion design

Panel operation as well as field operation experience

Planned and drilled horizontal wells; Drilled Slant and S-typed wells using magnetic single shots and rotary drilling assemblies;Worked with inclination and resistivity at the bit for horizontal wells;Conducted cased-hole and open-hole side-racks;

Seeking professional enrichment in Petrochemicals Plants In the area of Project ~ Plant Pre-commissioning & Commissioning ~ Plant Operations ~Quality Assurance

Drilling Superintendent with over 30 years experience. I have worked in the Middle East and USA. I have Workover & Completions Experience. I am in excellent health and prefer rotational assignments.

Canadian Drilling Supervisor

I am looking to join a company that values its customer services staff and with whom I can build a great career.

I have rough-necked, worked as a drilling engineer and as a consulting well-site supervisor and can relate to every level of personnel around the rig, effectively. Explainig the reasoning behind why things are done a certain way helps everyone buy into the total project, and reach a common goal.

Document Controller / Document Manager/ Crewing Manager

Toopusher, Rig manager, Drilling Supervisor, Directional Driller

A Bachelor's degree holder in Chemical engg, have about 20+ years of Hydro carbon Industries experience both in Oil & Gas refineries and Oil production facilities. Having very good knowledge and trained in Fire fighting techniques and Plant safety equipments.

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out