Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87752 next resume »»
CONTACT INFORMATION:
View contact information...

Objective
To take my skills and talent that I've acquired as a craftsman and business owner and put them to use for a highly respected, reputable company. To put my natural leadership skills and ability to supervise to work for a company that takes pride in it's quality and attention to detail.

Qualifications
Most recently I have owned my own framing business for the last 9 years. I have continued to work on the job sites to ensure my product is nothing less than exceptional. With my experience in the construction industry being so varied, I have gained my Class A to operate various tractors, trailers, trucks, and pieces of equipment. I have always maintained and worked on my own equipment and vehicles, my skill and experience in mechanics dates back to when I was a teenager working out of our own garage. My skills are diverse, as I have worked in many areas of construction, including roofing, siding, block, plumbing, stucco, demolition, and general remodeling. I have also worked both residential and commercial, single family and multi-family projects. I work well with others, possess strength in leadership, and communicate well with homeowners/ clients, contractors, inspectors, and other subs alike I have experience in heavy equipment operations including- skid steers, many all terrain fork-lifts (Petty bone, Lull, Ingersol-Rand, New Holland), dump trucks, day cab tractor trailer, doc trucks, clam trucks, mini track hoes, and a variety of tractors. My driving record is clean and health card current.

Relevant Experience
7/2008-1/2009 Ice O-Metric Contracting Inc., Big Lake, MN
General laborer. We worked on the St. Cloud Army National Guard helicopter base addition. I installed a foam insulated steel panel system and commercial grade steel trim. Misc. steel framing. All Commercial.

2/2003- 6/2008: Morlock Construction, Zimmerman, MN
Owner and supervisor for framing crew. I read blueprints, created bids, and framed new construction and remodel, while acting as the job superintendent for the builders that I worked for. Jobs have included both single family and multi-family projects.

9/2005-7/2005 Brylock Contractors, Gulf Port, MS
Partner/ owner. This was a partnership that was formed by myself and another individual in response to the need for workers in MS after Katrina. Most of our work was non-profit, and when I say non-profit, I mean we did not charge for our services. We did demolition and rebuilding both residential and commercial.

7/2001- 2/2003: MBM Construction, Zimmerman, MN
Partner/ owner. A three way partnership of a new home construction framing company.

Other companies employed with:
CSN Construction: Zimmerman, MN
Remodeling and additions.
Chad Nasby, owner, 763-286-7322

Bakken Builders: Big Lake, MN
Sub-contractor, framing, remodeling.
Commercial and residential.
DJ Bakken, owner, 763-263-3900

Palmer Homes North: Ramsey, MN
Framing and remodel.
Jason Palmer, owner 763-464-2511

Cairnes Construction: Elk River, MN
Lead carpenter, crew supervisor. New home framing.
Rob Cairnes, owner, 763-238-7340

Sierra Corporation: Blaine, MN
Lead carpenter, new home framing.
John Likum, owner, 763-783-9616

Mark's Stucco: Ramsey, MN
Stucco laborer
Mark, owner 763-427-7344

Anderson Plumbing: St. Francis, MN
Out of business, number not available

All Home Remodeling, Greenfield, MN
Framing, general construction.
Ray Schreckenghaust, owner, 612-685-2676

Viking Pattern and Mold, Blaine, MN (1990's)
Mold maker
763-746-4004

Carley Foundry, Blaine, MN (1990's)
Mold Maker
763-780-5123

Certificates/ Licenses
Class A CDL, MN.
Forklift certified
Permit to carry a concealed weapon, MN.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2151 to 2200 of 2725)Go to Search Parameters...
Brief Description
Marketing and Software experience with Oil & Gas (drilling) background
BSc Mechanical Engg. with Honours (aggregate 82.5%) having 1 years experience in Maintenance and Production Operations.
Wireline engineer (Trainee Engineer, Junoir Engineer, Field Engineer)
I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.
I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.
Construction manager, laborer, Class A CDL Drivers license, mechanic
With over eight years of project management experience on seismic petroleum exploration surveys and submarine cable installations. Proven ability to work independently, to work closely with the client on site, and to supervise operations in diverse and difficult working environments
Experience in Managing Quality Control & Assurance for Upstream & Downstream Petroleum business & ability to provide Technical information to the Fuels & Lubricant consumers to facilitate sales. I have also been trained on HSSE & worked on various project in Shell Paksitan Ltd.
Maufacturing Automation
Mechanical, electrical, structural maintenance & repair, estimating, project supervision.
With 8 years of extensive management & engineering experience in construction field, I seek a senior management position which will allow me to utilize my experience at higher positions.
Electronics Engineer exp. in OPTICAL FIBRE , RF, WIRELESS, PROJECTS ROLLOUT
Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager
I have 17 years of telecommunication company experience in all aspects wireman and engineer would you mind whatever work
A female mechanical Engineer with good analytical skills and can work effectively in a team.
Welding Engineer
A diligent Civil Engineer with eight (8) years of Professional commitment to hard work in diverse role varying from Site Engineer, Project Engineer, Site Manager, and Construction Project Manager. A good team player, highly mobile and willing to be part of a result driven goal oriented team.
NACE Level II Certified Coating Inspector, Certified Welding inspector
MWD/LWD Specialist with 3 years of Professional Oilfield Experience, Associate Degree holder in Mechanical Engineering, Got Specialised Trainings in Academy from SCHLUMBERGER & BAKER HUGHES for "MWD Technology"
Bachelor of Engineering graduate in Electronics and Telecommunication looking for an Entry level job in Oil and Gas industry
10y in National Oil company, HND Mechanical, 4y Artifical lift pumps Technican, 4y Drilling & Wellservices information mangment Engineer
Highly motivated individual with skills in Operation of Diesel Generator set (5x20MW), for Electrical projects in Designing, Estimation and Supervision of Industrial and high rise buildings.
Remote Paramedic, Firefighter, Paramedic
Dedicated, results-oriented, professional with the ability to manage projects and meet deadlines. Strong communications, customer service, and problem-solving skills. Successful in networking with individuals on all levels. Excellent organizational, multi-tasking and time management abilities.
Competent HSE Officer and registered with Department of Occupational Safety & Health Malaysia, Lead HSE MS Auditor with NCSB. Diploma in Occupational Safety & Health.
nvq level 3 in electrical installations, 17 th edition wiring regs, hv terminationsand splicing, supervisor experience
Commissioning of utilities in oil & gas plants and water treatment plants
Mechanical System Engineer
I can doa high level operation for most of equipments.
Mechanical engineer with extensive experience of over 13 years in contract administration, estimation, tendering, budgeting, cost control, billing variations, claims and arbitrations & project closing. Well-versed in procurement, installation and commissioning of electro-mechanical
Senior Document Controller. 9 years experience. Oil & Gas, pharmaceuticals, petrochemicals. Bachelor of Science in Electrical Engineering graduate. Using WebDMS. Electronic transmittals, document store, electronic issue of documents. ISO standards. Can lead Doc con group. Coordinate with Clients,
D.A.E. (Mechanical) 1970/3300 Second 1989
Exploration geologist: Geological mapping, hydrogeological modelling with modflow, sedimentary petrography and petrophysics (cathodoluminescence), drilling supervision, geotechnical investigations: SPT, CPT, seabed CPT, Vibrocore, Softwares: Arcgis, Modflow, Terrasurf, Qinsy
I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects
I wish to join a organization that can utilize my skills and training effectively that is commensurate with experience and qualifications and reward me accordingly. I am a well presented person and can take up new employment at short notice.
BSc in Petroleum Engineering from University of tulsa, USA GPA 3.7/4.0. Willing to relocate, flexible, passion for fieldwork, outstanding academic record, good leadership skills, interpersonal and communication skills, presentation skills, excellent work ethics
Dynamic professional with solid 22 years of experience in the shipping business and 4 years of experience in the document management engineering field, aims to respond to new challenges and contribute effective in the shipping and engineering field.
Both geophysicist and computer enginner with good skills and experience in mining and oil & gas industry. Seeking a challenging position with growth and responsabilities.
I am a Graduate in Mechanical Engineering with four years experinece in the field of Oil and Gas. Iam also a certified CWI by AWS and also got certification as Level-II in RT,UT,PT,MT.
Senior MWD Field Engineer or Directional Driller Trainee Coordinator Experience, Lead hand and familiar with EM, Gamma, Pressure and Logging while drilling
Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate
Energy Industry Management Professional
Highly organized, detailed oriented and self motivated Lead Engineer having 6 years of professional experience in the field of product development/sustaining engineering
Managed three R&D labs, namely, Failure Analysis Lab, Mechanical/Metallography Lab, and Metrology Lab
Asst. Manager Systems with Skills like System admin, Network admin, Helpdesk Manager & MIS.
Metallography Analysis, Mechanical Testing, Non-Destrustive Testing,Failure Analysis,Corrosion
To work in a challenging and motivating environment where there are opportunities for the full and effective utilization of my skills and potentials and to showcase my God-given talents.
I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects
To obtain a suitable position in pursuance of promising career where I can make use of skills and experience for the growth of the organization, in conjunction with recognition and encouragement for hard work and sincerity.
Around 20 years (around 8 years as lead) experience in all QA/QC activities up to final certification of equipment and piping including pre commissioning inspection in Oil & Gas (Production Platforms (Topsides), Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbui
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   [ 44 ]   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Operations;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com