Resume - Instrument Supervisor

Misco Jobs

Resume #87756

CONTACT INFORMATION:
View contact information...

FIELD OF INTEREST:

To work in the field of Process Instrumentation and Controls, Fire and Gas detection system, Process operation and Electrical & Instrumentation engineering works.

JOB OVERVIEW:

* 14 years experienced in the field of Instrumentation and controls works.
* Recently worked as Instrument Loopcheck Supervisor in Dung Quat Refinery project.(Vietnam)
* Experienced in supervision and inspection in Instrumentation Installation works.
* Supervised in calibration of process variable instruments, loop checking and commissioning of process controls with extensive experienced in troubleshooting loop control faults and carry out logic sequence check of a process controls that interface with (DCS) Distributive Control System and (PLC) Programmable Logic Controller automation equipment.
* Supervised during commissioning and start-up of Oil and Gas plant, Water treatment plant and Power plant, responsible for rectifying all instrumentation and controls troubles. Also involved in warranty period, performing some maintenance job.
* Experienced as Fire and Gas Supervisor maintenance in Gas plant.
* Worked as Instrument and Controls Engineer in Power plant project.
* Worked in Oil and Gas, Power and Petrochemical plant process instrumentation and controls.
* Well verse in the interpretation of Instrument loop diagrams, piping and instrument diagrams, Signal flow diagrams, wiring diagrams, Panel drawings, PLC ladder diagram and Wire lists.

EDUCATION, TRAINING & SEMINAR:

* Graduate of Bachelor of Science in Electrical Engineering
Cebu Institute of Technology (Cebu City, Philippines)
June 1986 to October 16, 1993

* Total Quality Management Orientation Seminar
EEI Corporation (Quezon Power Plant Project) November 20, 1998
* Training on Instrumentation & Control of Electrical Equipments
Don Bosco Training Center (Cebu City) June 15 to Oct. 17, 1992
* Seminar on Electrical Machines & Equipment
Cebu Institute of Technology (Cebu City) December 16, 1992

OTHER SKILLS:

* Involved and experienced in Carbon Dioxide gas processing generation, Water demineralizer operation and process in Drinking water treatment.
* Knowledge in Microsoft Windows (Word, Excel, Access and PowerPoint).

WORK EXPERIENCE:

October 23, 2008 to April 30, 2009
Position: Instrument Loopcheck Supervisor
Employer: Technip Consortium
Project: Dung Quat Oil & Gas refinery project (Vietnam)

Job Description:

* Coordination with the Instrument QC inspectors related to the instruments installed that are ready for loopchecking.
* Preparation of documents related to loopchecking such as loop folder.
* Responsible for assigning loop to technicians that are ready for loop checking.
* Recording number of loops that done in a particular system.
* Giving technical advice to technicians if there is a trouble in loops.
* Coordination with DCS engineers and system specialist if a loop is related to the DCS logic.
* Acknowledge and resolve punchlist items that arise during loopchecking such as system and construction punchlist items.

August 10, 2007 to June 30, 2008
Position: Instrument Supervisor
Employer: Foster Wheeler Italiana (World Services Italia)
Project: Ethylene Glycol 2 Project (EQUATE) Kuwait

Job Description:

* Responsible for the monitoring of subcontractor works including issuance of instrument materials during installation.
* Update the progress of instrumentation works done by subcontractor.
* Decide as built Instrumentation installation works as per design standard.
* Prepared and update new revision of instrumentation design drawing.
* Planning and scheduling of instrumentation works according to the priority system.
* Coordination and supervision of instrumentation installation works at site.
* Anticipating all the problems that may come out during the instrument installation especially issuance of materials and making sure all are available in terms of completion schedule of the priority system.
* Checking the quality of instrumentation erection works.
* Raise Extra Work Request for changes to contractor scope of work.
* Proactively participate in all safety matters affecting the construction of the project.

May 23, 2007 to July 18, 2007
Position: Electrical & Instrument QA/QC Inspector
Employer: Chicago Bridge & Iron (CBI)
Project: Ras Gas Common Offplot Project
Ras Laffan, Doha, State of Qatar

Job Description:

* Assigned in Butane, Propane and Condensate tanks, responsible for inspection the quality of electrical and instruments materials before it is installed and it should conform to E&I method statement and quality control procedure.
* Review the specifications and project standards for the installation of Electrical and Instruments materials and making sure it must conforms of the said project specifications and standards.
* Performed inspection and witness the quality of Electrical and Instruments installations done by Electrical & Instrument subcontractor.
* Attend minutes of meeting discussing the Electrical and instrument work progress and other E&I work matters.
* Giving some advice and comments to Electrical and Instrument subcontractor works in relation with the quality of their works before handover to the clients for final acceptance.
* Preparation of documents for inspection works purposes such as Inspection request documents for electrical and instrumentation works.
* Interfacing with the subcontractor and client for the final acceptance of electrical and instrumentation works.
Dec. 07, 2004 to January 11, 2007
Position: Instrument/Fire and Gas maintenance supervisor
Employer: Tyco Fire and Security U.A.E
Client: GASCO (Habshan) Abu Dhabi Gas Industries Ltd.

Job Description:

* Performed and Supervised preventive maintenance of PLC (Allen Bradley) based fire and gas detection system such as UV/IR, Flammable, H2S and SO2 detectors in different areas of gas plant.
* Rectify faults or troubles on fire and gas detectors installed in turbine gas compressor which is controlled by HOW panel fire detection system.
* Performed preventive maintenance of smoke, heat detectors and manual call points in substation and control room includes checking of deluge system installed in the plant.
* Performing preventive maintenance of CO2 and Inergen gas extinguishing system control installed in substation, Instrument Equipment shelter and in Turbine enclosure.
* Performed preventive maintenance and fault rectification of SIMPLEX panel based fire detectors.
* Performed call out duty if there is any trouble in fire and gas system in Gas plant.

July 2, 2003 to Dec. 28, 2003
Position: Senior Instrument Technician (Commissioning)
Employer: Industrial Maintenance International Ltd. (IMI)
Project: Chad/Cameroon Oil Development Project (Chad, Africa)
Main Contractor: TChad Cameroon Constructors (TCC)

Job Description:

* Involved in calibration and commissioning of monitoring instruments installed in oil pump station such as Vibration monitor (Bently Nevada), winding temperature of the electric motor, includes commissioning of Lube oil controls of pumps and motor.
* Assigned in metering skids responsible for calibration of flow transmitter and control valves.
* Carry out logic sequence check that checks against the cause and effect diagram to make sure that logic is correct before starting the motor oil pump station.
* Also, assigned in Central treating facility, Responsible for calibration of pneumatic control valves and loop checking of process instruments that is controlled by (HONEYWELL) DCS.
* Commissioning of process instruments and controls installed in different skids such Vapor Recovery skid, Heating & Wash module skid and Produced Gas Compressor skid, all these skids are using PLC (ALLEN BRADLEY) controls.

December 06, 1999 to Oct 30, 2002
Position: Senior Instrument Technician
Employer: Engineering Equipment Inc. Corp. (EEI)
Project: Phase 2 Power and Desalination Plant Project
Saline Water Conversion Corporation (SWCC) (Jeddah, K. S. A.)
Main Contractor: Saudi Arabian Bechtel

Job Description:

Assigned in water treatment plant area that consists of CO2 gas plant, Deminiralizer skid, Water filter plant for drinking purposes and Chemical dosing skids for Boiler and Desalination plant.

My main duty is to calibrate, loop check and commission all the process instruments and analyzers to prove the instruments accuracy and loop integrity. After all the system is ready for operational I am also involved in start up of those plants with the operation personnel and during on start up, I am responsible for rectifying loop control faults and assist for fine tuning on the controls of the plant. Controls of those plants are interfaced with ALLEN BRADLEY (PLC) and ABB PRO CONTROL P (DCS)

Assigned also in five units of Boiler plant with a capacity of 118 MW per unit. I am involved in loop checking of process instruments also rectifying loop control faults that interfaced in ABB DCS.
After all the plants is in operational I am involved in warranty period of those plants that doing some maintenance job before it is finally turn over to the client.

July 08, 1998 to July 1999
Position: Instrument & Controls Engineer
Employer: Engineering Equipment Inc. Corp. (EEI)
Project: Quezon Power Plant Project (Coal Fired) (Quezon Province, Philippines)
Main Contractor: Bechtel Overseas Corporation

Job Description:

* Take off materials for instrumentation installations with reference to installations details.
* Coordination with the other Field Engineers on construction engineering matters in relation of instrumentation installations and works scheduling.
* Perform field inspection of instruments installed & responsible for recording at computer database for production report.
* Responsible for the supervision and development of work packs for technicians.
* Analyze and interpret control system of the plant in preparation for the logic cause and effect check.
* Perform field as built design of instrument installations during construction.
* Provide technical documents to technicians such as wire list, panel list, loop diagrams and P&ID for reference in pre commissioning and commissioning works.
* Rectify punch list works as per Client comments.

July 07, 1997 to April 20, 1998
Position: Senior Instrument Technician
Employer: Engineering Equipment Inc. Corp. (EEI)
Project: Petron Refinery Expansion Project (Bataan, Philippines)
Main Contractor: DAELIM

Job Description:

* Assigned in refinery expansion unit, performing bench & field calibrations of process instruments.
* Functional check & calibration of pneumatic controllers & control valves (Fisher & Masoneillan)
* Perform loop checking of instruments installed for the preparation of start up.
* Attend troubleshooting on instruments & loop control faults during start up.
* Assist equipment vendor in commissioning the control system of oil pump station unit of refinery expansion.

March 06, 1996 to April 1997
Position: Instrument Technician
Employer: M. Al Mojil Group
Project * Methyl Tertiary Butyl Ether Plant Project (Jubail. K.S.A)
* Petrokemya Plant (Petrochemical Plant Rehabilitation project) (Jubail, K.S.A)
Main Contractor: Brown & Root Saudi Limited

Job Description:

* Participate in setting up of Calibration shop, includes lay outing of pneumatic tubing for pneumatic calibration purposes and list down all calibration equipments to be used in calibration shop.
* Responsible for bench calibration & testing of all incoming instruments before turnover to construction group for field installation.
* Later on assigned in field for loop checking and testing of transmitters, indicators, control valves & recorders for proper setting of instruments.
* Assigned in Petrochemical plant for instrumentation rehabilitation & responsible for reconditioning of all process instruments.
* Perform field calibrations in accordance with the new instrument location such as Differential pressure & Flange type installation of level transmitters.

Jan. 1995 to Jan. 1996
Position: Instrument Technician
Employer: Engineering Equipment Incorporated Corp. (EEI)
Project: *PETRON (Petron Refinery Expansion Project) Jan. 1995- March 1995
*Qatar Gas LNG Plant Project (Ras Laffan, State of Qatar)
(March 1995 -Jan 1996)
Main Contractor: CHIYODA

Job Description:

* Assigned in Gas & Oil desulphurization unit at Petron refinery expansion project performing testing & calibration of process instruments.
* Responsible for testing & calibration of all pneumatic controllers & valves for the Gas & Oil desulphurization unit of the plant.
* Involved in loop check out of process instruments based on YOKOGAWA DCS control system.

* At Qatar project, Assigned in Nitrogen plant, Boiler & Air compressors assisting equipment vendors in calibration and commissioning process instrumentation.
* Assist in DCS logic sequence check of process instrumentation based on FOXBORO DCS.
* Perform setting up of vibration monitor of air compressor unit of the plant (Bently Nevada).

Feb. 1994 to Nov. 1994
Position: Instrument Technician
Employer: Trigon Management & Industrial Corporation
Project: SHELL Refinery Expansion Project (Batangas, Philippines)
Main Contractor: Fluor Daniel Pacific Inc.

Job Description:

* Undergo training on Basic Instrumentation & Control system for duration of one month conducted by the company.
* Assigned in Pilipinas Shell Petroleum Corp., performing bench calibration of electronic transmitter, pressure gauges & testing of pneumatic control valves.
* Assist YOKOGAWA (DCS) vendor in commissioning of plant control system.
* Involved in loop checking on process instrumentation.
* Marking up of instruments calibration sheets after work has been completed.
* Other duties & responsibilities taken upon the request of my Immediate Superior.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 2721)

Go to Search Parameters...

Brief Description

I am a dedicated and hardworking Materials Coordinator / Controller with an excess of 10 years experience in oil and gas industry.

Enviromental Geological Engineer and Regulatory Affairs Manager

I am an environmental professional with 20+ years of experience in private industry, county government and non-profit marine research. Areas of expertise include management and development of technical and non-technical staff; development of outreach programs, budget planning and management.

M.Sc. (Geology),Reservoir Simulation, PVT analysis, EOR, WSO, Data Management, Reservoir Field Operations, Well Test Analysis, Material balance, Field monitoring.

I have long work experience in both tech and service related positions. Such as liner man on the countryside, - an all-weather work, -digging and raising telephone piles. Connecting telephones and represented company in peoples homes.

Geologist

Process modeling simulation using "ASPEN HYSYS".,Pipe line design, sizing and optimization with relevant safety requirements,Knowledge of Codes & Standards, Piping engineering

Award-winning, highly accomplished and motivated professional with over all four years of proven track record of rapport-building, resourceful problem-solving, communication skills, also with substantial experience in Techno-managerial capacity.

male, 28 age years old. I have worked for Schlumbeger as Coiled tubing Field Engineer from 2000-2003. Now I work in Malaysia as a Coiled tubing consultant for Schlumberger.

Experience Cementing supervisor with most training abroad

I would like to work as Process/Project Engineer/ Instrument and Control system Engineer in the oil & gas, Water, Paper, Mining, Food, Sugar, power plant, railway department or any other industry where I can utilize my extensive skills and experiences in a range of industries.

Construction Manager in Harbour and river construction, Offshore construction, Marine works, Land fall pipe installation, Dredging, Post trenching, Pipe laying, Tie in, Diving

I have attented Nigerian breweries one year technical training and i obtain necessary engineering skills in my studies as well in my higher school of learning

- Skilled Control Panel Operator and Area Operator

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

PP with 9 years industry experience in Niger Delta, GOM and North Sea provinces. Both studies and operations oriented in core PP skills ranging from quick look/detailed and field reviews. Input to well proposals, workovers and FDP’s. Worked with Shell, Halliburton, BP and Baker Hughes

I am seeking a position that maximizes the education and experiences that I have attained during my time at USMMA and working for Tidewater. The leadership, seamanship and engineering, dynamic positioning, human relations, and adaptation skills that I have developed, make me an ideal candidate.

Seeking full time employment with an oil company who needs a Loader Operator.

Safety Engineering professional with Oil and Gas Exploration and Production background, seeking a position as HSE Engineer in Offshore O&G Industry.

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Scolecodontologis specialist

I am a loyal, hard working team player and enjoy exceeding targets. I continually persevere to achieve the best possible results in what I do and am motivated by achieving and being successful. OOW Deck II/1 (CoC)

Well test supervisor

Well testing technician

Working in the oil&gas industry since last 15 years(11y ears in abroad) working as a Sr. Commissioning operator.

I am engineering graduate in Mechanical from Shadan College Of Engineering, JNTU, India having around 7 years of experience in the field of Electronics/Mechanical related with Projects/Maintenance. I joined Saudi Perfume and Cosmetics Industry-Jeddah, one of the largest manufacturer of perfume.

Instrument Supervisor

Over 20 yrs of exp in upstream O&G. 7yrs offshore, from construction of offshore platforms, hook up and commissioning through to start up and steady state production. Strong HSE focus (previous role in charge of offshore platform), strong hardware completion and handover exp. LNG experience.

I WISH TO APLLY FOR THE POST of a Field Engineer. Every other Information about me are contained In my cv below

Present Assignment: Specialist – MTBE Operations Department MTBE Malaysia Sdn. Bhd.(From April 2001 – Till date) (a wholly owned subsidiary of Petronas Malaysia)

I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, Derreks, asst driller. I know how to work on motors and diesel motors. I know how to weld.

Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Environ and social impact expert, sustainable development project planner, monitoring and evaluation, stakeholders mgt, computer literate, B.Ag econs, M.sc, Ph.D (Rural sociology)

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

I can work floors, motors, and derricks.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

All qualifiations are posted on my resume exept that i have a passport.

Enthusiastic, results-oriented geologist with experience in mineral/oil & gas leasing programs

Service, Manufacturing, & Equipment Manager (General Mgr / Operations Mgr)

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Retail supermarket management operations: employee relations, customer service, safety, inventory levels/ordering, profit/loss, legal requirements, building maintenance

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

Measurement & logging while drilling operations with steerable tools; Drilling services ƒæ Logging while drilling with resistivity tool in deepwater operations ƒæ Logging while drilling with Neutron and Density tool, use of Radioactive sources ƒæ

Field Engineer - UBD

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out