Resume - Currently seeking a challenging & demanding position that allows me to acquire n...

Misco Jobs

Resume #88201

CONTACT INFORMATION:
View contact information...

Date of Birth: 19/09/1975
Age: 34 years
Marital Status: Married
Nationality: Indian
Expected Salary: Negotiable

________________________________________
Objective

Currently seeking a challenging & demanding position that allows me to acquire new skills and use of my unique skills and experience. Do desire a work environment that fosters teamwork & encourages independent responsibilities and challenges. To contribute in a dynamic team with the objective of creating a better competitive edge in a globalize economy.

Working Experience

DUBAI PETROLEUM. UAE. | MAY 2008 ¡V TILL DATE | ROTATION CYCLE 28/28 DAYS

Production Specialist in the offshore fields of Dubai Petroleum, Dubai,Operated by PETROFAC.

Thoroughly focused on Safety, by following the procedures especially for Hotwork, Confined space Entry and Electrical Energized work. Well versed with Lock out /Tag out system.
Operation/Trouble shooting of Four Stage oil (Three phase / two phase) Separation system (Using DCS / Rosemount System3).
Well versed with opening, testing and shutting in gas lift operated wells and Water Injectors. Simops, samplings, Acid jobs, squeeze jobs and Drilling rigs are part of the normal routine.
Produced water treatment cleaning using VORTOILS (Hydro cyclones)
Operation of Dresser Clark, Cooper Bessemer and Dresser Rand Centrifugal compressors driven by Avon gas turbines used for gas lift at 1600 psi supported by Allen bradley PLC for start up,shutdown and process controls.
Coordinating the opening and shutting of oil wells through SCADA.
Preparing production reports, raising work orders, issuing work permits, notifications, preparing Job Safety analysis and handing over equipment for maintenance as per the HSE Standards. The job entails detailed writing of shut down, start up and isolation procedures for carrying out major maintenance jobs including turnaround.
Well versed in initiating CAF (change approval format ) -Management of change document for any process changes or technical issues as and when required.

Mitsui Phenol Singapore Pte Ltd. | NOV 2000 ¡V APRIL 2008 |

SENIOR PROCESS / PANEL OPERATOR.

Member of pioneer batch actively involved in the initial commissioning start-up And debottlenecking projects as DCS operator and field operator in rotation in co-ordination with contractors and vendors.

Units handled: cumene unit, oxidation, concentration, cleavage, phenol and acetone distillation and recovery units and associated utilities including furnace, incinerator, high pressure water tube boiler, steam generation and distribution, cooling tower system, condensate recovery system, demineralization unit, de-aerator system,, Nitrogen system, refrigeration system & flare system.

Equipments: centrifugal and positive displacement pumps, canned type pumps, multi stage centrifugal pumps, centrifugal compressor with expander, positive displacement compressors, furnace with natural gas and fuel oil firing, incinerator facility with boiler, heat exchangers(shell and tube, spiral, U-tube, kettle type, plate and frame),steam generators and condensate recovery system,

Job responsibilities:

ƒæ DCS OPERATOR using YOKOGAWA CS 3000

ƒæ Comprehensive knowledge of permit to work system and Lock out Tag out procedures.

ƒæ Preparation of work procedures and involving in risk assessment meetings.

ƒæ Perform safe and efficient operation of DCS control room duties in line with company policies and safe work procedures.

ƒæ Thorough knowledge of interlock systems and assisting instrument department in interlock loop check and testing.

ƒæ As a senior member, carrying out responsibilities without supervision.

ƒæ Giving on-job training to junior technicians, guiding and motivating them.

ƒæ Responsible for smooth operation, start up, shut down and trouble shooting of the units. Handling process upsets and emergency situations in plant using DCS control.

ƒæ Preparation of procedure for equipment handover for shutdown maintenance.

ƒæ Active member of in-house safety committee giving safety suggestions and improving plant safety conditions and house keeping.

Manali Petrochemical Ltd., India. |FEB 1998 ¡V OCT 2000 |

Process Technician

Worked as process technician in the above said concern manufacturing propylene glycol, propylene oxide and polyol.

Units handled: propylene oxide, propylene glycol unit, hydrocarbon storage, nitrogen generator with cold box, air compressor with dryer beds, Medium pressure boiler, flare system & chiller plant

Equipments: operation of centrifugal and positive displacement pumps, liquid ring vacuum pumps, heat exchangers, tubular reactor, multi stage evaporators, vacuum distillation, air compressor & screw compressor

Job responsibilities:

ƒæ Process technician responsible for smooth operation, start up, shut down and trouble shooting of units handling field and DCS operation in rotation.
ƒæ Operating production equipments in safe and efficient manner in line with safe operating procedure and practices.
ƒæ Preparing equipments for shut down maintenance.
ƒæ Maintaining up to date log of all activities in area of responsibility and collection of routine samples.
ƒæ Reporting to supervisor of any unsafe condition in the plant.
ƒæ Co-ordination with maintenance department for routine maintenance work.
ƒæ Knowledge of material safety data sheet in handling chemicals safely.

Process systems handled: Atmospheric, pressure, extractive, azeotropic and vacuum distillation units, liquid extraction and concentration, multistage vacuum evaporators.

SPIC TUTICORIN India. |NOV 1996 ¡V FEB 1998 |

Worked as process operator in following area above said concern

ƒæ AMMONIA plant with high pressure boiler unit
ƒæ High pressure Gas compression Unit
ƒæ Gas absorption Unit using Amine solution with Regenration
ƒæ Naptha reformer Unit (catalytic reforming )
ƒæ Hydrofining unit (Sulphur removal from Naptha as H2S )
ƒæ Tank farm ( including floating roof tank for naptha storage )

Job responsibilities:

ƒæ Process technician responsible for smooth operation, start up, shut down and trouble shooting of units handling field and DCS operation in rotation.
ƒæ Operating production equipments in safe and efficient manner in line with safe operating procedure and practices.
ƒæ Preparing equipments for shut down maintenance.
ƒæ Maintaining up to date log of all activities in area of responsibility and collection of routine samples.
ƒæ Co-ordination with maintenance department for routine maintenance work.

EQUIPMENTS HANDLED:

Various types of pumps and compressors. ( HIGH PRESSURE multi stage both centrifugal & reciprocating), Various types of Distillation columns, ( STEAM, VACCUM,ATMOSHEREIC ), Various types of Heat Exchangers, and Reactors, Experience in REFORMER, STRIPPER, CONVERTOR, GAS ABSORBER & REGENRATOR, HIGH PRESSURE BOILER, POLISHED WATER, DM WATER UNIT, STEAM TURBINES.

EID Parry (India) Ltd. |JULY 1995 ¡V OCT 1996 |

Worked as process operator in following section above said concern

Involved in commissioning of 10,000 mt Ammonia Importation Terminal
Includes instrument air compressor unit, cooling tower,and Refrigeration

MADRAS FERTILIZER Ltd. India. |AUG 1994 ¡V JUNE 1995 |

As Plant operator-Apprentice Undergone training in plant operations and trouble shootings of AMMONIA plant, UREA plant,NPK plant,UTILITY sections like cooling tower, water treatment, DM & Polished Water production, instrument air compressors and HIGH PRESSURE BOILERS.

OTHER RELATED INFORMATION:

* Always very interestingly giving suggestions for process improvement, safety issues, and any cost reduction related to process.
* Participating in company ONSITE / OFFSITE EMERGENCY Drills very actively.
* Attending company monthly, safety and production meetings to know the details issuing by employer for continuous improvement.
* Having attitude to initiation, team work, leadership to give my best contribution to the company for continuous improvement as well as to improve personal career.

All these years of experience has molded me to work in any demanding and challenging environment. Best in handling team members and work hand in hand to achieve production targets without compromising on safety and procedures. Been the first to respond at time of crisis. Enjoy to work in a demanding environment.

Key attributes:
* Excellent interpersonal & team work skills
* Strong written and verbal skills in English
* Experience in working with multi national workforce.
* Strong decision making capability.

Qualification

ƒæ DCTech., Diploma in Chemical technology (First Class)
ƒæ Steam Engineer grade-2 from Singapore Polytechnic authorized by ministry of manpower Singapore.
ƒæ Confined space safety assessor course from ministry of manpower Singapore
ƒæ Basic Fire Fighting & FIRST-AID training by DPTC, Dubai.
ƒæ Helicopter under water & sea survival Training by DPTC, DUBAI.
ƒæ Well versed training in H2S gas handling by Dubai petroleum.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 2726)

Go to Search Parameters...

Brief Description

College Study with 13 years oil & gas Logistics Experience

Certified Lead Auditor in ISO9001 and coversant with 14001, Trainer of ISO QMS, Plastic Technologist and expert in Quality Control of entire production, In-charge of resolving customer complaints and overall expertise in devoloping new furniture and engineering plastic products

Chemical Engineer, Project Manager, Process Operator in oil and gas

I have oilwell service experience with wireline, swabb have ing, fishing and rental tools. I24 years experience with manufacturing and machine work on oilfield equipment. I am an hands on hard working man with good hand eye coordination that likes the challange of working on oilwells.

I have over 19 years of experience in Procurement area including over 3 years of reservoir management and production management for oil company. I possess good knowledge in Purchase Order Processing, Inventory, Quality Assurance, Expeditor, Production (both Surface and Sub-surface).

A successful, experienced and qualified Commissioning and Production Operations Start up Shutdown Coordinator and Start up Specialist with over 17 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Operational, process, construciton, commissioning jobs

I have more than 27 years of petrochemical experience in a very wide field, including Methane Reforming, Air Separartion, LNG Storage, Tank Farm and Despatch (pipe line, rail, road and ship), Process design and Utilities (water treatment). Also extensive construction and commissioning experience.

Consultant Night Drilling Supervisor / Drilling Supervisor. Available for immediate employment. Minimum $650 USD per day (more for hardship/dangerous locations).

I have experience with several major international oil companies. I also have expertise in drilling, production, maintenance, construction, projects and operations. My experiences have been found at a local and international level.

Experienced in Management, operations and administration at upper levels in business related to Marine Operations, Business Development, Contracts Matters, Private Business and Coordination of Marine Repair and Refurbishment projects.

PROFESSIONAL SUMMARY Over 20 years of proven expertise in direct oil and gas operations. An experienced trouble-shooter and problem solver.

Extensive experience in the Gulf Coast and Gulf of Mexico in all phases of drilling, completion, remedial & production operations.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

Managed and implemented product, equipment, and process design/modifications in manufacturing. Developed and managed concurrent design engineering initiatives, proto-typing, product development/validation (NPI), manufacturability, preparation of specifications and operational documents.

Public Affairs, Public Relations, Training, Cross Cultural emphasis. Managerial, Technical, Supervisor, Trouble-shooting and Training expertise in Oil/Gas production operations, one offshore. Proficient Macintosh/IBM PC comp. International work. Cross-cultural training, work and personal exp.

B.Sc. Chemistry degree and having 9 years experience in petrochemicals and refinery in process department

Free! Core Competencies: Project Management, Operations, Reliability & Integrity Improvement Process(ORIP), Drilling & Production Startups, Well & Pipeline Operations, Team Leadership & Collaboration, Process Improvements, Operational Performance Benchmarking, Oil & Gas Production Optimization, Drill Stem

Plant operator

Well test supervisor / engineer with Reservoir experience

I am having 17 years of experience in Pre commissioning/Commissioning /Start up and Operation of different Oil/Gas/Refinery/petrochemical/ plants/units/off sites/Utilities

I have been working at Mudlogging Operation more than 15 years. And have responsibility as:

Skills and Qualifications: 20+ years in the Oil & Gas Industry, Presently working as Operations Supt. in Kuwait, my goal is to move out of the Drilling Company side and into Production

To obtain a job in the in the Oil and Gas Industry that will challenge my abilities.

Logistics Coordinator - Offshore/Onshore, Base Operations Mgr. [2009]

I have over 25 years of experience in the petroleum industry, primarily focused in drilling operations and engineering. My diversity includes US domestic and international experience offshore and onshore. I am seeking any challenging opportunities to further my career.

Over 12 years of rich and extensive experience in Oil and Gas, Refinery and Petrochemical and currently serving at PETROFAC INT LTD. Kuwait in KUWAIT OIL COMPANY.

Drilling consultant with 15 years experience on land rigs.

I am an Engineering graduate with 13 years of operational as well as commissioning experience.currently working with Qatar LNG plant

+13 yrs exp in Well site geologist , Data Engineer

cnc machinist, edm die sinker, wirecut operator

Over 14 years of experience in wide range of core refinery operations like pre-commissioning, commissioning, operating ,optimisation, handling start up and shut downs etc of various process plants like FCCU ,SRU, Naptha HDS, CRU ,CO Boilers/ Meroxes/ N2 /benzene/toluene/Hexane extraction plants

Last 5 years employed rig manager, unit drilling, 19 years in drilling,texas panhandle

Dedicated professional with a strong background in Wireline operations, planning and support. Currently working as a Petrophysics supporting Wireline field data acquisition, real time data monitoring and QC, processing and interpretation.

Good knowledge of international QHSE regulations and standards as well as oil and gas operations and business.

Global experience in Supply Chain, Logistics, and Project Management

More than 20 years practical experience in the field. Preference is given to a position in AFRICA, ASIA or MIDDLE-EAST.

I am a drilling supervisor with more than 19 years experience. Great experience with all drilling operations running casing/liner cementing fishing hole problems like losses & pipe string stuck. Great experience with different base mud also heavy weight mud over 17.7ppg and different bits & PDC

Instituted and formulated the safety and health program for the Company in accordance with the guidelines prescribed for this purpose

A competent professional with over 8 years of experience in Plant Operations, Erection & Commissioning & Process Improvement.

Currently seeking a challenging & demanding position that allows me to acquire new skills and use of my unique skills and experience. Do desire a work environment that fosters teamwork & encourages independent responsibilities and challenges.

I am a experience plant operator seeking for a full time position in a goal oriented company

Rich experience in LNG panel operations.

Chief QC Geophysicist, Seismic Data Processor, Up Hole Observer

operation and monitoring

I have wide industry experience in leadership, engineering, commissioning, maintenance and production mainly in the Oil and Gas industry. This experience includes both onshore and offshore production facilities including 7 years on an offshore production and drilling platform.

Throughout more than 18 years of Field/Head office experience in petroleum engineering.

I have 19 years experience in petrochemical plants since 1986, as a SENIOR PROCESS OPERATOR. Please read my cv and give me reply immediately. Present I am working the Andhra petrochemical plant as a senior process operator.

Multi-talented, goal driven manager/engineer with a broad base of technical know-how and skills that allows driving fast-track projects from all the angles required to ensure parallel development of safety, cost control, EPC, procedures and implementation.

Process Assistant Shift Supervisor, Maintenance Coordinator, Turnaround Coordinator, Process Control Room Operator

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out