Resume - Professional Heavy Duty Mechanic with leadeship and overseas experience seeks fu...

Misco Jobs

Resume #1354

CONTACT INFORMATION:
View contact information...

Objective:
To obtain a full-time or contract position as a Heavy Duty Mechanic or Shop Supervisor with a well respected local, national or international organization.

Qualifications
- More than 35 years experience as a licensed heavy duty mechanic working on assignments in Canada and around the world in the mining, oil and gas, construction and forestry industries.
- Leadership experience as a Senior Mechanic and Master Mechanic/Shop Supervisor of up to fourty-eight maintenance personnel.
- Training and experience with many types of heavy duty equipment.
- Independent small business experience as owner and operator of a mobile mechanic business.

Licenses and Certifications
- Certificate of Proficiency from the Province of Alberta as a Heavy Duty Mechanic
- Inspector's License [CVIP] from Alberta Department of Transportation to inspect commercial vehicles
- Numerous Detroit Diesel certificates for overhaul and tune-up
- Air endorsed Class 3 Alberta driver's license with no violations
- Defensive Driving
- Certificate of Accomplishment to "Safely Supervise People"
- Kuwait civil I.D. and driver's license
- Holder of previous certificates requiring renewal for WHMIS, H2S, Basic First Aid, Basic Firefighting, and Helicopter Offshore Survival

Work History

Halliburton Overseas Limited
Various Countries
1984 - 1987 and 1995 - 2002
Long and short-term contract assignments have included various full time positions as a Senior Mechanic in Canada, Russia, Libya, Qatar, Turkmenistan, Kazakhstan, and most recently in Kuwait as Master Mechanic/Acting Shop Supervisor. These positions often required extensive travel and sometimes included living in the country of employment. Responsibilities included all level of repairs to a variety of well service equipment and most recently they included supervising a crew of eight maintenance personnel.

Capital Equipment
Hamilton, Ontario, Canada
1988 - 1991
Initially employed as a shop mechanic responsible for all levels of repairs to earth moving equipment and was later promoted to lead hand until the company went out of business.

Parker Drilling
Amazon Jungle, Peru
1981 - 1984
Employed as a full time oil rig mechanic on Rig 206 in the Amazon jungle of Peru on a rotational duty basis. Responsibilities included general maintenance to the rig and liaising with the welder, motorman, and electrician to ensure proper care of the rig and all of its mechanical components.

Westbourne Drilling
Hassi Messaoud, Algeria
1978 - 1981
Employed as a full-time shop mechanic on a rotational basis. Responsibilities included minor repairs and major overhauls to 10 Kenworth off-road trucks used for rig moves.

Education:
High School diploma from the Province of Alberta

References:
Work and personal references available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1341)

Go to Search Parameters...

Brief Description

Professional Heavy Duty Mechanic with leadeship and overseas experience seeks full-time or contract position with a well respected organization anywhere in the world.

High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE.

MILLWRIGHT

With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I have strong organizational and people skills. I communicate well with the craft and customer, both written and verbally, I am also computer literate.

Applying Insulation and Sheet metal Cladding.

Skills are; mechanic, HVAC, heavy equipment etc.

Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.

Wellsite supervision -specializing in drilling supervision

Mechanical Supervisor, offshore, FPSO experience.

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

Electrician with over ten years of experience

Millwright/Safety

i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences.

Senior directional drilling supervisor.

Experienced, over 10 years as an instrument control technician commissioning start-up Hydro carbon, fertilizer and petrochemicals plants

I have extensive oilfield service experience in frac,cement and nitrogen operating in Prudhoe Bay,Alaska.Dewatering using both centrifuge and clarifier.I have been a frac supervisor and field coordinator.Just received mud engineering certificate.

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

Onshore and offshore crane operator

Extensive experience in the Electric Sumbersible Pump Industry

18 years of experience as a Senior Rotating Equipments Specialist. Specialized in the installation, commissioning, inspection, diagnosis, troubleshooting, refurbishment and maintenance of turbo machineries of major manufacturers used in Petroleum refineries, Petrochemical plants, Fertilizer complex

Working in oil refinery qatar since 2000 as a general technician electrical maintenance.

Nace 1 Coatings Inspector

I am seeking a long term employment contract within a company that would offer advancement, a good starting wage, and benefits.

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Eskom, De Beers Mine, Municipality and Spoornet is the companies that help me build up my career. With all my electrical skills and knowledge I can only be a profit to your company. My positive attitude to my work is the cause of my good safety record.

Senior Civil / Structural Designer

quality control / quality assurance

I have a wide knowledge of on & offshore,gas, petrochemical and marine electrical systems.this knowledge and experience in conjunction with my professional qualifications combine to offer any potential employer the benefits of a well rounded and knowledgeable individual. Valid 4 Year Australian Visa

To utilize my broad skills and experience in offshore and onshore oil and gas installation for process control instrumentation and electrical maintenance.

Objective Employment with a company desirous of a dedicated, hard working, creative, team player, offering 25 years of experience in the Instrumentation field.

Resume for employment

The computer skills I have apply primarily to Landmark (Unix, SunSolaris, Oracle) and Kingdom (SMT) seismic workstations. I am proficient with most PC applications as well. My work history is stable and I have good references.

Seeking a position as a driller where my experience, training, loyalty and good work habits will be an asset to your company. I have over 27 years of oilfield experience offshore and on land with expertise in the following: supervision, operations, trouble shooting, safety and derricks.

Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Certified Drilling Fluids Engineer with extensive knowledge of oil field operations and experience working with oil wells, and well maintenance

Well services Supervisor

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

Piping supervisor. on & offshore construction/maintenance

I am currently seeking employment internationally preferably on a rotational basis

To join an organization where management skills and experience can be exercised to provide leadership in the areas of design, construction and plant maintenance utilizing my training and 25 years of experience to improve the firm's long term viability as a successful business concern.

Proficient in managing reciprocating and rotating equipment maintenance, supervising general servicing, overhaul, installation, commissioning and troubleshooting of this equipment, ability to set up and operate CMMS programs

I have over 20 years experience as a Welder/Fitter. The majority of my experience is in the Oil & Gas Industry. I am willing to relocate and/or travel.

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out