Resume - Graduate Chemical engineer with experience in process control and instrumentatio...

Misco Jobs

Resume #155

CONTACT INFORMATION:
View contact information...

Summary

Graduate Chemical Engineer with over 20 years of experience in process instrumentation and advanced control in Petroleum, Power and Nuclear industries.

Experience

    2000– till date    Kuwait National petroleum co (IMCO) KuwaitInstrument & control engineer Upgrading TDC 2000 to TDC 3000. (involved in the engineering, tender specks preparation, evaluation and implementation Upgrading ESD system. (involved in the engineering, tender specks preparation, and evaluation). ACS & DMC plus implementation and maintenance.    Control system analysis. DBMS maintenance. Data reconciliation.
    1989–1998    Saline Water Conversion Corp.    Saudi Arabia Senior Instrument engineer. Engineering and design of I&C systems for Power Plant Boilers and desalination plants. Material balance and performance calculations on process computers. ACS/DMC implementation study. Presented a paper on “Advanced control implementation for Power and Desalination plants” in SWCC symposium. Modernization and DCS specks preparation. TDC2000 and INFI90.    BMS study and technical evaluation for Boilers.
    1988–1989    Indchem Electronics    IndiaAssistant Project Manager    Engineering and design of I&C systems for projects. Implemented Statistical Process Control Systems in Poly Urethanes plant at Cuddalore, India. Tender preparation. Vendors negotiation.
    1981–1988    National Chemical Lab    IndiaScientist (Engineer)    Computer(PDP11/73) system in charge. Developed real time software (FOTRAN)for process control on PDP11/73. Simulation of realtime controls on PAN reactor for IPCL. Engineering of I & C systems for Ethylene Oxide reactor and distillation columns. Deputed to USA, worked with Prof. Deshpande at U of L . Study of IMC, DMC and implementation on a pilot plant unit using Microvax.    Software package for VLE data, simulation for reactor controls.1974–1981    BARC    IndiaScientist (Engineer) Engineering, and maintenance of I&C systems. Developed data acquisition system for fuel reprocessing process plant. On line Process material balance and energy balance using TDC312.

Education    1969–1974 Annamalai University India B.E (chemical).
Courses    Advanced Controls University of Louisville, Kentucky USAExpert systems RPI Troy, New York USAMicroprocessors TIFR India

Computer skills    Basic, Fortran, C, ORACLE 7.x, Dev2000, MS Office, Visio.

Membership Senior member ISA

Papers
1. Advanced controls for Power and desalination Plants
2.    Statistical Process control for Poly urethanes
3.    Process dynamics dictates control valve selection.
4.    Mathematical modeling techniques.

Personal data        Date of birth:    10-05-1952.
            Married.
            One son and one daughter.

REFERENCES: will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 1351)

Go to Search Parameters...

Brief Description

Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,

I have extensive experience in plant start-ups, trouble-shooting, and process management as a supervisor, technician and operator. I am seeking an operations oriented position.

Application to vacancy Medic (Doctor)

Skills & experience is mainly in the industrial/commercial sector

at present working on cyberbase rig totally computerised

Proven experience in open and case hole waveform processing and Formation evaluation Processing and Interpretation. Knowledge of geophysical exploration and 2D and 3D interpretation, depth conversion and velocity modelling.

CSWIP 3.2 , AWS-CWI qualified welding inspector and having 10+ years experience in welding inspection

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

DUTIES: Overseas experience in East Africa -Mozambique and various remote locations in Australia on OD&E Double ,Tripple and Work Rigs (Ideco H-725,Cardwell KB 700,Kremco K-600,Ideco 1200ED-SCR,National 610E-SCR,Franks Cabot 300) encompasing all standard and preventative mechanical maintenance on al

Geologist, 17 years experience with major Oil Company in various international settings (Europe, Asia, Middle East and Africa) both as development- and exploration geologist. Analytical and flexible. Swiss national.

Electrical technician:Plus 28 years of experience at drilling rigs. Electric & electronic maintenance at many kind of land rigs,with "IPS", "Ross Hill"& "GE" SCR's Drive systems,Varco TDS4 & TDS11SA top-drive, Kato generators,GE,Toshiba,Reliance DC motors,etc.English,Spanish Italian and Portuguese l

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using Monte Carlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

Hard working, 110 % at all times, willing to work in any weather condition. I work on heavy equipment at the present time

TIG, MIG SMAW, duel shield, drawing, ASTM, ASME codes, MIL 256-7, copper-nickel, plasma cutting

All aspects of seismic data processing - signal processing, velocity modeling, migration

Sr. Petroleum Geologist, 27 years experience, production & exploration expertise.

Class 3 Operator with Clean Abstract

Highly knowledgeable in the principles, application, installation, start-up and commissioning, troubleshooting, repair, and calibration of Process Instrumentation and Analyzer Systems.

Graduate Chemical engineer with experience in process control and instrumentation in Petroleum, Nuclear and Power industries. Worked on DMC and SPC advanced control strategies. Computer software skills.

painting and insulation supervisor/manager

OBJECTIVE: Seeking a full time position in Transportation. QUALIFICATIONS: Illinois, Class A, CDL license with a clean driving record. Familiar with transit regulations and Illinois Rules

COMPETENT IN ALL ASPECTS OF ON/OFFSHORE CRANE OPERATIONS

Positions desired: Plant Services Supervisor, Platform Deck Foreman, Mechanical Supervisor

I have worked in the Middle East for the past 16 years my last position was working for Canadian Nexen on their Oil Storage Export Terminal in the Republic of Yemen during my employment with Nexen I held various positions I started as Mechanical Technician.

Diploma obtained after 03years of technical school since 1972 to 1975 brevet of technical school.

Certified Rigger

Stage 3 crane operator 25 years experience oil / gas / subsea / construction

diesel mechanic&fitter turner machinist with technical management skills. 28yrs exp. expat . job locatio no problem. brief off shore exp.

Have worked and travelled all over the Pacific region, NZ and Australia. I have interacted and worked with a wide diversity of cultures. I am a very hard worker, I learn new skills quickly and am able to implement them accordingly. I wish to continue utilizing my skills as a Diesel Fitter,

Qualified, Experienced Heavy Equipment Mechanic

CNC machinist, edm die sinker, wirecut operator

I have more than 9 year experience in Installations,Commissioning ,maintenance, trouble shooting of all Cathodic Protection Systems in Offshore-Onshore , Pipe Line ,Oil and Gas Industries, Refineries, Petrochemical Plants,MarineJettys. And excelent Experience in DCVG (2200Km),CIP(1600Km) Surveys .

Worked with International Oil Companies for 25 years, with experience as a Floor Man.

Front end setting in ,pipebending,fabrications,lower & lay,tie-ins.

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Supervisor with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills, can drive change and motivate individuals to enhance company performa

My skills include, but are not limited to diesel engine rebuilding,hydraulic equipment repair and modification, troubleshooting and repair. Drilling equipment, cranes, forklifts and are some I have experience with. Mechanical equipment includes Cat engines, Drawworks, Mud Pumps, TDS9S, TDS11S.

Electrical Technician, Ross Hill and IPS SCR drives, Varco Top- Drives

Now i'm working in Qatar as a store keeper, i have more than 6 years experience in this field , i'm working in oil field project

* A Petroleum Geoscientist with strong IT background having 10+ years full cycle experience of exploration & production industry with multinationals such as Eni, CGG and Lasmo Oil.

Offshore Medic

To apply my skills and training as a Heavy Duty Mechanic. I am a forth period apprentice and have experience with the repair and servicing of hydraulics, gaseous compression systems. And fluid pumping systems, coil tubing units, diesel engine repairs, and tractor/trailer repairs.

Mechanical engg - experienced in overhauling/maintenence of diesel engines(marine & Indust),pumps,compressors and all type of equipments.

+12y of experience in the oil industry, especially onshore& offshore oil drilling service which has worked in the Senior Electrical engineer in more than two company to the position of Assistant Director of maintenance

marine, Industrial Journeyman Electrician

Qualified electrician; lv & hv cable; switching linking safety testing & earthing upto 132kv

Geoscientist with over Six (06) years of professional geological & geophysical experience. Team player with excellent technical, demonstration, project management and interpersonal skills, and dedication to industry working environment.

Bsc Chemistry Garduate, total 17 yrs progressive experience in petroleum Industries as Lab Technician, Chemist, Operator. Last 9 years working as a Marine Surveyor (Petroleum Inspector) at Kuwait. Can Run & set independent Lab for Petroleum Products. Liecenced driver with ISO Quality system knowhow

Sales/Marketing business Development Manager with technical exposure and hands on in Well Testing, Down hole Testing and production facilities.

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out