Resume - 14 years Experiences in welding inspection, quality assurance and quality contro...

Misco Jobs

Resume #16842

CONTACT INFORMATION:
View contact information...

EXPERIENCE SUMMERY
- Perform Visual Inspection and Non destructive testing / surveys to identify the potential problems and determines causes and possible remedial actions
- Coordinate with construction / operations and maintenance to schedule inspection activities
- Carryout material inspection to ensure conformity with appropriate construction codes
- Supervise inspection programs and prepare, review / evaluate inspection reports & test results also develop recommendation of required work to avoid reduction in operating parameters
- Identify & report Non-conformities to specified requirements. Verify agreed corrective action
- Conversant with international codes & standards and carryout work to client's specification in accordance with ISO quality systems
- Preparation / approval of WPS for piping / pipeline and witness PQR / WQT
- Prepare QCP according to the project specification.
- Preparation of QA/QC documents, test packs and final submission to the client for approval
- Experience in preparing packages and provide inspection coverage for Hot tap welding work hot/cold tie-in work
- Welding inspection and monitor the process
- Inspection for surface preparation and painting inspection as per specification
- Conduct holiday inspection for under ground pipe coating/wrapping
- Verify alloying element by Positive material identification test(PMI),
Ferrite content test
- Tank floor inspection for possible underneath corrosion by MFL methods
- NDT report evaluation, Plan & assign work to NDE personnel in accordance with approved procedure and to extend specified in the contract.
- As built drawing preparation, Documentation of inspection activities and dossier submission.

QUALIFICATION
- CSWIP 3.2 Welding Inspector from TWI UK
- B GAS painting inspector grade 2
- CWI-Certified Welding Inspector from AWS
- ASNT Level 2 in UT,RT,MT & PT methods

EDUCATION: Diploma in Mechanical Engineering

TRAINING: MFL Tank floor inspection by m/s Silver wings ltd. UK
Visual Inspection Program by Indian society of NDT
ISO Lead Auditor training program
Computer Skill: Working knowledge in MS Office

EMPLOYMENT DETAIL
1. Zainal Daud Sdn.Bhd, Brunei,
From September 2005 onwards working as a senior QA/QC Inspector
Client: Brunei Shell Petroluem
2. Velosi. Oman
From December 2003 to June 2005 working with (PDO) Petroleum Development of Oman on QA/QC service contract.
- As a PDO representative monitor the contractors daily activities in compliance with quality and safety, implementation of the quality surveillance program in new construction and modification of existing facilities such as well hook up piping, flow line & gathering stations
3. Galfar Engineering & contracting llc. Abudhabi, UAE
From October 2002 To June 2003
Client: Abudhabi company for onshore oil operation (ADCO) Asab field
4. LG Engineering & Construction Corp., Kuwait
From march 2001 To February 2002
Project: New Gas oil De-sulphurization (New GOD), KNPC, Kuwait
5. Emirates Industrial lab. Dubai, UAE
From September 2000 To February 2001
Deputed to Kuwait Industrial Refinery Maint. & Engg. Co (Kremenco) Kuwait
Project: Kuwait National petroleum Company (KNPC). Mina al ahamadi refinery, Kuwait
6. Ndt & Corrosion Control Services, Abudhabi, U A E
From January 2000 To April 2000
Client: Abudhabi gas company (ATHEER)
7. Al-Mutawa Samyong Ndt.Co.ltd, (AMSYCO) Dhahran, Saudi Arabia
From August 1995 To December 1998
Assigned as a multi discipline Inspector to Saudi Arabian Oil Company (SAUDI ARAMCO) Pipeline operation inspection Division, Dhahran
8. Emmen Engg. Works Mumbai, India
From January 1991 To August 1995
9. Hindustan Ferodo ltd. Mumbai, India
From October 1989 To October 1990

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 1470)

Go to Search Parameters...

Brief Description

Senior/DCS Operator or supervisor Position.

15 years experience in construction, labor, maintenance and natural gas industries, holding positions such as Derrickman, Floor Hand, Motor Hand, Driller, Mason, Top Laborer, Sheet Metal Fabricator/Installer, Duct Board Fabricator, HVAC Installer, Roofer, Landscaper and Handyman.

Training in various safety, survival, and drilling courses to become a valuable asset to the oil and gas industry.

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Deck officer with five years of work experience on board of AHTS’s, OSV’s, Container, Con-Ro and other vessels as Cadet/OS, 3rd Mate, 2nd Mate, Chief mate and Relief Captain.

15 years experience of Finance Analysis, Cost Control, Finance Reporting and Internal control experience / OIL AND GAS INDUSTRY ‘ KEY PERFORMANCE INDICATORS - KPI expert performer and designer.

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

* Stand watch and fire boilers kept logs, made reports as required.

Fully qualified Diesel Mechanic. NVQ Level 3 in Heavy & Light Commercial Vehicles. HGV C+E Licence. ADR Licence. 13 years experience with Mercedes Benz. Numerous Mercedes Benz Certificates held.

Profile: A qualified Senior Geological Observer who has gained over 15 years experience in offshore basin analysis, subsurface analysis and diamond exploration with De Beers Marine, the company leading the search for offshore diamonds in the world.

Total of 7 years Experience. I am familiar with all kinds of fire fighting systems and fire detection system and safety equipments in offshore.

Develop, implement, supervised and monitor continual safety and training programs. Work successfully with client representatives to manage compliance with Loss prevention, Environmental, Project Management and client requirements satisfactorily.

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

Drilling Supervisor - 17 years Drilling Experience - 7 years International Experience - Safe and Efficient

I am seeking a position in your esteemed organization, Hawk Petroleum Inc. for Sales, Marketing, Trading of Petroleum Products in South East Asia (Indi)

Hydroblaster

Maintenance in PLC,DRIVES,Instrumentation Field

M.Sc Energy Economics and B.Sc Petroleum Engineering. Currently working as a Petroleum Economist, have a cumulation of 7 years in the Oil and Gas industry, 3 years + in the Upstream sector and 4 years in the Downstream Sector. Strong spreadsheet skills and intermediate level PEEP user.

Lead Instrumentation Technician

Free! Qualifications - 500 Ton Master Oceans Inspected- 1600 Ton Master Fishing Vessels Oceans - 3000 ITC Master Fishing Vessels Oceans - Able Bodied Seaman Unlimited -ARPA STCW Certified HazWoper TWIC

Pipe Fitter, Foreman, General Foreman.

Prepare all tools for next program,such as Bit.Bit Sub.Cross Over.DC.DP.Slips.Casing.Etc. maintenace and stored back properly.Watch all Equipment work properly and if something we don't expect occure I have to fix it or mentioned it to autorizhed person.Give hand to driller and manage all crew.

11 years of heavy equipment operation and supervisory experience

I am a qualified Heavy Duty Vehicles driver, Crane Operator as well as a mechanic. I have a vast eperience of 21 years in managing heavy equipments including cranes, Trucks, Trawlers and Bull-Dozers. I had been working working as a workshop incharge in UAE Armed Forces.

experience for 20yrs in electronic instrumentation, telecommunication , fire and gas, and electronics

5 years of experience as a instrument technician in oil and gas process plant

Experienced Directional Drilling Consultant

I am a surveyor looking for a rewarding job.

30 years experience in the industry and a seasoned expat, last position held was the turnover coordinator for the Washington Group in Northern Alberta, Canada. Also spent 4 years in Baku, Azerbaijan as the senior electrical commissioning eng.

Instrument Technician / Qc

20+ yrs experience surface and DTH

Mechanic - desire employment opportunities.

M.Sc Geology + PG Dip in exploration and production of oil & gas+ 3 years exp in mudlogging

Knowledge in operating the electrical equipments

Service, Manufacturing, & Equipment Manager (General Mgr / Operations Mgr)

Technical Author, Trainer, Project Manager

Rigger Certificate, Crane Certificate - experience in handling crane

Experenced equipment mechanic currenty working for a Caterpillar dealer

Process/Operations Engineer, with four years of Refinery (FCC) experience.

Retired from PAF as “Chief Technician”

Certified Welder, Forklift/Crane Operator

Laboratory Techniques, computing skill, creativity, communication skill.....

Aviation expert with 21 years in the maintenace arena. Track record of increasing productivity, improving quality while reducing cost and meeting customer needs. Skilled in scheduling, supervising &evaluating over 50 personnel. Successful in developing & executing operational policies and procedures

Professional in Quality and HSE

Heavy equipment operator

Crane specialist. Heavy duty mechanic, mobile crane operator, trade licences. Towercrane ticket, and presently apprenticing as milwright to further my skills. Operate and repair many makes models of hoisting equipment. Rigging, inspection, supervision skills + more 20yrs exp with industry leaders

Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence

Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.

14 years Experiences in welding inspection, quality assurance and quality control, NDT inspection and documentation with major middle east oil companies. Qualification: Diploma in Mechanical engg, CSWIP 3.2, BGAS Grade 2, NDT level 2 in 4 methods

Caterpiller Trained Heavy Diesel Fitter with open cut and underground Experiance on Caterpiller, Tamrock, Leiberherr equipment

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out