Resume - High Qualification of Welding Safety Construction School More than 20 Years ex...

Misco Jobs

Resume #1904

CONTACT INFORMATION:
View contact information...

Pipe welder, Welder/Fitter, Safety Technician

Maritime Documentation:
Liberian Seaman Book: # 499310
Safety at Sea (IMO MC-1.13) # 2475-997
International Vaccination # 13532
Uruguayan Passport # 2.779.016-7
Uruguayan Seaman Book # 31780
Uruguayan Seaman ID Card # 1130.131

OBJECTIVE: To secure a position where I can apply my technical knowledge and skills
along with more than 20 years of experience. My best intention is to comply with the company's
rules; everything about me and the job must always be like a temple where the pride of each day
is the highest performance to quality standards that also ensure the safety of me and my
co-workers.

MARITIME EXPERIENCES:
September - October 2000 Jaiger Welding Contracting - Ship Repair (USA) Welder/Fitter
April - September 2000 Bob Ship Repair (USA) Welder/Fitter
April 2000 Tsakos Ship Yard (URU) Welder First Class
April 1998 Carnival Cruise Lines (USA) Dry Docks, M/V Destiny, M/S Jubilee - Welder/Fitter
1997 - April 1998 Tsakos Shipyard (URU) Welder First Class
1992 - 1997 Arko Shipping (SWE) M/S Mineva, M/S Verona - Welder/Fitter Onboard
January 1992 Lascon B.V. (NED) (Holland) Ship Repair, Welder/Fitter
September 1991 Carnival Cruise Lines (USA) Dry Docks, M/V Mardi Gras, M/V Holiday - Welder/Fitter
1988 to August 1991 Asmar Ltd. Marine Engineering (URU) Welder First Class
February - July 1988 Merpesc Shipping (ITA) F/V De Giosa Teresa, Oiler/Repairman
February 1988 Sermar S.R.L. Marine Engineering (URU) Welder/Fitter
Nov 1987 - Jan 1987 Marazul S.R.L. Marine Engineering (URU) Welder First Class
September 1987 RIN Marine Engineering (URU) Welder First Class
1984 - August 1987 Manuel Pellicer S.A. General Ship Repair (URU) Welder First Class
January - April 1984 Stalero SO. Shipbuilding (BRA) Welder
1981 - January 1984 Manuel Pellicer S.A. General Ship Repair (URU) Welder First Class
May - July 1981 Vamper, S.R.L. Ship Repair (URU) Welder/Fitter
August 1980 Nautconsult Shipping (ENG) M/V Santa Teresa - Welder/Fitter

CONSTRUCTION TRADE EXPERIENCES:

November - December 2001 NEPCO (National Energy Production Corp.) (USA) Combo Welder
October 2001 McBurney Corporation (USA) Tube Welder
September 2000 - September 2001 Foster Wheeler Constructors, Inc. (USA) Combo Welder
2 months in 1991 Turboflow Uruguay S.A. (URU) High Pressure Pipe Welder
January - April 1981 Saceem Construction (URU) Plate Welder, Structural Welder
November 1980 - January 1981 Impsa S.A. (ARG) Pipe Welder
6 Month Contract April 1980 Comarco S.A. Isle Tierra del Fuego (ARG) Construction Welder
February - March 1988 Tractorsur Ltd. Isle Tierra del Fuego (CH) Oil Tank Heavy PlateWelder
1979 Montages Industriales Almaro Ltd. Isle Tierra del Fuego (CH) Structural Welder

LICENSES AND CERTIFICATIONS:

2001 - Combo Welder, with Certifications to:
QW-484 Using WPS No. P2-At-(6-4) Rev. # 5; 6" Sch. 120 (.562 Wall);
QW-484 Using WPS No. P1-A-(3-3) & P1-A-(3-4); For 6" Sch. 80 (.432) with 6010 Down

July 2001 - Certificate: Construction Site Safety Technician
The National Center for Construction Education and Research
Taught at Sanford, Florida, USA (OSHA Recognizes 10 hours of this Course)

2000 - New Construction, Heavy Pipe Welder, Certification to:
ASME IX 1998 Edition 2000 Add. Procedure Number 1-1-TS-1, Material P-1 to P-1
Qualifications Limits: Thickness F-6 (GTAW) .250 Diameter (MAX) F-4 (SMAW)
Unlimited (Range) 2-7/8" Min. Positions All

November 28, 1998 Certificate: Technical Welding, Steel Plate and Pipe
Weld Unions: 1G, 2G, 3G, 4G, and E. 7018 (Steel Plate 1/2")
Pipe Unions: 2G, 5G. E. 7018 (6" Cell 60)
Tig Unions: 2G, 5G. E. R. 70.55 (PIPE 2" CELL 40)
From Kolping Institution, Montevideo, Uruguay

December 15, 1997 Certificate No. 2475-997 for
Safety at Sea, Firefighting, Sea Survival, and First Aid
From Director and Registrar of Merchant Marine Naval Academy,
Montevideo, Uruguay

September 28, 1989 Certificate: Welder’s Qualification for Normal Steel
Nippon Kaiji Kyokai, from KAMBARA, Uruguay

May 15, 1987 Certificate: Course in Planning and Development
Uruguayan School of Technology Mechanical Drawing, Montevideo, Uruguay

May 20, 1986 Certificate: Course in Mechanical Drawing
Uruguayan School of Technology Mechanical Drawing, Montevideo, Uruguay

November 28, 1980 Certificate No. 22646 for 330 hour Course in Electrical Welding
Instituto Nacional de Capacitación Profesional, in Punta Arenas, Chile

EDUCATION:

1980 – 1982 Industrial Technician - Courses Leading to Industrial Engineering
Liceo Industrial SuperiorTechnico Vespertino, Montevideo, Uruguay
1971 – 1974 Industrial Technician - Courses Leading to Industrial Engineering
Escuela Industrial Superior, Punta Arenas, Chile

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1469)

Go to Search Parameters...

Brief Description

Bsc Chemistry Garduate, total 17 yrs progressive experience in petroleum Industries as Lab Technician, Chemist, Operator. Last 9 years working as a Marine Surveyor (Petroleum Inspector) at Kuwait. Can Run & set independent Lab for Petroleum Products. Liecenced driver with ISO Quality system knowhow

Installation of electrical and instrument equipment, commissioning and pre start up, layout plc panel and install plc parts, wiring of motor controls in mcc, and construction works.

Sales/Marketing business Development Manager with technical exposure and hands on in Well Testing, Down hole Testing and production facilities.

Computer and management skills, mechanic supervisor, diesel performence and diagnosis, inventory quality and control, have worked in middle east and Africa.

Storeman, Expediter, Roustabout, Clerk

Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.

Pipe Welder+Metal Fabricator+Iron Worker

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

Boilermaker for 15 years petro and power

Professional Heavy Duty Mechanic with leadeship and overseas experience seeks full-time or contract position with a well respected organization anywhere in the world.

19 years of welding experience, oil and gas fabrication. superintendent, engineer, inspector.

High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE.

With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Driller/Directional Driller experience, looking for either, and will travel anywhere.

Senior Directional Driller Offshore/Land Domestic International 25+years

I am a mechanical engineer and I have been in the OIL & GAS DRILLING profession for past five years as rig mechanic, who is engaged in repair and maintenance of RIG equipments. I have good communication skills as well as great commitment towards work

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I have strong organizational and people skills. I communicate well with the craft and customer, both written and verbally, I am also computer literate.

I am a Chemical Engineer by qualification. In my professional career spanning over nineteen years, I have worked in the Marketing function of leading players in the petrochemical industry in India, with regional responsibilities spanning across Asia, Western Europe and Africa.

Electrical Technician Electrical instructor

Applying Insulation and Sheet metal Cladding.

1st class welder fitter i have six full years expierience in this field

Welder ****16 Years Experience***

Skills are; mechanic, HVAC, heavy equipment etc.

Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

I HAVE 11 YEARS EXPERIECE AS MOTERMAN ,I AM HOLDING PANAMA THIRD ENGINEER UNLIMITED C.O.C

Millwright/Safety

i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences.

Certified CSWIP 3.1 Welding Inspector / Radiographic Interpreter (level 2) and CSWIP / BGAS Site Coating Inspector, seeking an interesting, challenging, fast paced position in the inspection / QC field. Eager to share my experience and knowledge with a position that allows growth and development.

10 plus years as an inspector

DIPLOMA IN MECHANICAL ENGINEERING

Experienced, over 10 years as an instrument control technician commissioning start-up Hydro carbon, fertilizer and petrochemicals plants

Oil field experience in a variety of areas, Supervising drill crews.

I can work any where on a drilling rig, Driller,Derricks,Motors,Floors ect.

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

Professional Experience Mainly related to Industrial and Oil Jobs

Extensive experience in the Electric Sumbersible Pump Industry

15 years experience in the Machinist trade on both CNC and manual machine tools.

Nace 1 Coatings Inspector

Experianced offshore rigger and AB seaman, 200t captain, With US work visa, DSV, AHTS, Supply vessels, jackup barges

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Heavy Equipment Operator

Senior Civil / Structural Designer

I have had both mechanical and condition monitoring experiences which will make me a very competitive candidate to fulfill condition monitoring and/or mechanical position. I have had ISO Cat-II vibration analyst for condition monitoring.

Journeyman Heavy Duty Technician

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out