Resume - I have retired from the US Army so I am not looking for a benefit package, ie… m...

Misco Jobs

Resume #19487

CONTACT INFORMATION:
View contact information...

1998-Present TRANSOCEAN
West Africa
Mechanic
Working offshore as a Mechanic on an Ultra Deepwater Dynamic
Positioning (DP) Drillship. Involved with the maintenance, inspection and repairs of the following drilling equipment:
Varco:
Pipe Racking Systems (PRS-6I)
I have replaced upper and lower drive shaft and bearings, lower and upper cam followers. Lately I have the opportunity to assist in using a column jacking kit.
Top Drive - TDS-4S
I have good experience troubleshooting hydraulic system.
I have overhauled Upper and Lower IBOPs and is familiar with the procedures in replacing the Upper IBOP in record time.

Continental Emsco:
Drawworks Electrohoist V
I have overhauled clutches and replaced gears and driveshafts.
FC-2200 Mud Pump. I have replaced crankshafts, connecting rods and crosshead liners. Also experienced in alignment of the extension rods and liners.

AmClyde Crane: Unit 20000 & 35000 series
Brandt: Mud Agitators, Vacuum Degasser and Shale Shakers.
General: Nissan Forklift, Centrifugal Pumps, and I have overhauled engines of different makes, etc.
I have also maintained and repaired/overhauled Automated Roughneck (AR-3200),
Automated Fingerboards, Hydraulic Power Units, Hydraulic Actuated
Elevators, Conveyors and Automated Casing Roughnecks.

Mechanic
I have retired from the US Army Watercraft field with an honorable discharge.

Responsibilities:
Transported and installed the rigs on the locations.
Exploitation, maintenance and equipment repairs, such as:
All diesel and gasoline Engines (Caterpillar, Detroit, Lambordini,
Mitsubishi) Power Units, Drawworks, Hook Traveling Blocks, Crown Blocks
Mud Pumps (TMS-500), Rotary Tables, Air compressors (SULLAIR).
Assuring a good function of all mechanic and hydraulic equipment's
I worked as a mechanic in automotive shop having the following responsibilities:Repairing and maintenance of different types of cars like; NISSAN, TOYOTA, IVECO, ASTRA, KENWORTH and Halliburton Cementing
Units.
Involved in all aspects of drilling equipment servicing, inspection, repair and overhaul.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1343)

Go to Search Parameters...

Brief Description

1:HSE. 2:NCTVT in Electrical.3: NAC in Electrical.4:'B' Grade Electrical license holder.5:Certificate course in Auto Cad software.6:Certificate course in Auto Cad software.7:Integrated Course in personal survival Technique, Emergency first aid courses.8:Certificate course in Fire prevention and prot

Documentum 5.3, DDMS (Digital Document Management System), Electronic Filing System, Library Automation, Develop Library Web Page through Frantpage, Develop Information Portal In-house

My main areas of expertise are negotiations, sales and account management. I have worked for many years as an entrepreneur being responsible for all operations in the Benelux region. So, business development experience is an essential part of my assets.

I have 19 years of oilfield experience most recently on 30000ft wells in areas of high pressure and high H2S. My familiarity with many rig types and conditions and ability to work without direct supervision makes me an asset to any progressive drilling company.

Chief Mate License with STCW 78/95 Convention, Norwegian Endorsement, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Helicopter Landing Officer Certificate, Basic Safety end Emergency Preparedne

1) CAN MANAGE MEDICAL AND SURGICAL EMERGENCIES,ESP. ACCIDENTS& TRAUMA 2) CAN MANAGE FRACTURES AND DISLOCATIONS 3) CAN PERFORM MINOR/MEDIUM SURGERIES

I was developed my business at Refineries,Fuel Oil Tank Storage,Power Plant Projects,above ASME B-31..P-5-P-11-P-22-P-91-X10 CHROM-CS-SS--DUPLEX-SUPER DUPLEX

15yrs experience in ammonia process

Electrical techinician work on FPSO/Rig and power plant

Working Offshore as an engineer and mechanic for 15 years

JOURNEYMAN CRANE OPERATOR

I have wide experience in the manufacturing industry which includes printing, mining, textile and food processing. my strengths are in hydraulics and pneumatics and plant maintenance

Tool push, Driller, service or workover or completion or re-entry rig, experianced in all aspects of these type of rigs, from 20m, too deap gas well complition of a crit, 5180m well.

I am seeking an international position preferably in Middle East/Canada or rotating schedule. I have 15 plus years of Oil and Gas field experience as a Foreman/Sr. Technician/Tech. of numerous gas and oil production facilities.

I am highly motivated, self-starter, team player and resourceful. I have worked in harsh conditions and adapt easily to any situation. I have just finished working in Iraq on the RIO recover Iraq Oil project for KBR. Prior to that I worked in Chad on the ExxonMobil Oil Recovery Project.

Setup PDMS, customize PDMS program in PML I and II to greatly reduce man-hours. Piping designer, draftsmen, produce drawings, model pipe support and ran pipe. Train others on PDMS.

7 months Trainee at the International Institute for Geo-Information Science and Earth Observation (ITC), The Netherlands. Educational assistant first-year practical “Rocks, Maps and Profiles” '02, Part-time field assistant '99-'01. Member of the board of the Geological Society of Utrecht,'99-'00

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Marine Maintenance Supervisor & Machinery Watchkeeper

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Free! Oilfield pumper, lease operator, supervise pulling units/ workover rigs

Qualified Electrician, have management skills, 22 years post apprenticeship experience.

Millwright Supervision

I have retired from the US Army so I am not looking for a benefit package, ie… medical and dental. Don’t waste my time with Alcohol and tobacco work to improve all situations job related tasks. Always give 110% to the company that work for. Currently working abroad 5th generation Drillship in Africa

I have M.Sc. (Masters) Degree in Petroleum Geology, have total experience of 7-8 years, have experience mainly in Petroleum and also mineral Exploration. Have worked in BP and BHP. exploring for a job as I am working no where now a days.

I am looking to be a part of a succesfull drilling team.

Licensed Electrical Supervisor / Project Manager with 30 years experience

Result oriented team player expert with extra organizational skills and over 20 years experience in the industry (Drilling, Completion and Work over)

Highly experienced commissioning/handover supervisor

Coded pipe & pressure vessel welder with valid certification

25 plus years working with subsea equipment offshore drilling/ 10 years varied welding experience.

Journeyman Pipefitter Journeyman Gasfitter Journeyman Plumber-Red Seal

pha,hazop,pfd,p&id,sop,aspen.htri

I have worked in the oil & gas drilling industry for over 19 years and possess a unique blend of experience and knowledge of how the industry works.

crane &heavy equipment operator,mechanic,welder & service manager

JOURNEYMAN MILLWRIGHT/FOREMAN 26 YEARS OF PROGRESSIVE EXPERIENCE AND DETAILED ORIENTED GOLD AND RED SEAL (V1984) JOURNEYMAN MILLWRIGHT/FOREMAN EXPERIENCED IN CONSTRUCTION AND PETROCHEMICAL PLAN ENVIRONMENTS

i have over 17 years experience with diesel and hydraulics mechanical and automotive installation and trouble shooting i am looking for a position where my experience would reduce downtime and improve production

Cable pulling Transformer and panel Erection &Installation

Career Objective:To be effective and efficient team member in Petroleum organizations, achieve Organizational and Individual goals. Completed M.Tech (Petroleum exploration) 1st year (1st&2ndsem) with 73%marks with specialization of Reservoir managements and Hydrocarbon Exploitation from June-2006 in

Objective: To work in a responsible and challenging position as a crane operator/deck foreman/crane inspector.

E&I Installations, Mechanical, HVAC, HSE

I am an experienced Electrical and Electronic Engineer with an HND degree in 1994. I also hold a certificate in woodward engine controls in 2003 in Holland.

TIG WELDER 14Y,ASNT LEVEL II ,RT,UT,MPT,PT.

Rig Electrician

I&E Supervisor/ Technician

Foreman on Oil Jobs

Lead Quality Engineer / Inspection Engineer / Welding Engineer

To obtain a position in the offshore oil & gas drilling industry which best utilizes my extensive mechanical skills and background while providing for career advancement. Currently residing in Fort Collins, CO, and in process of relocating to the Houston, TX, metropolitan area.

32 years of international and domestic deep water, jack-up barge and land rigs,in drilling, completion and workover in field operations.

I have worked on all sizes of rigs since 1983 and have gained a lot of down-hole experience in directional, horizontal and under-balance wells.

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out