Resume - Senior Instrumentation Specialist / Designer

Misco Jobs

Resume #26512

CONTACT INFORMATION:
View contact information...

EXPERIENCE:
U.S. Air Force:
Ground Navigational Radio Equipment Maintenance
Maintained VHF, UHF and Microwave Radio Equipment for aircraft location.
Honorable Discharge

Ashland Inc. Catlettsburg, Ky. Refinery (Now Marathon Petroleum Company)
Refinery Operator, including 4 years as a No.1 (Lead Operator):
Operated various refinery process units, high pressure boilers, turbine and reciprocal gas compressors, baghouses, process heaters, pneumatic transporting and conveying systems.
Trained unit operators on process operation and Honeywell DCS controls.

Instrumentation Technician:
Installation and maintenance of various types of process control systems.
(Honeywell TDC 2000 & 3000, Moore, Bailey, Foxboro, and etc.)
Worked with construction trades on capital projects.
Purchasing, installation and maintenance of Primary and Final Elements.
Experienced with control valves (including purchasing, rebuilding and calibration)
Installation and maintenance of process analyzers
Participated in the first Marathon-Ashland Catlettsburg Refinery 1999 ISO-9000
certification.
Experienced with Cornerstone Cal Station computer program for calibrating, certifying, and documentation of instruments for ISO-9000 and PSM service.
Trained instrumentation apprentices:
Troubleshooting and repairing all aspects of control loops. Calibration and documentation of instrumentation. Use of test equipment. Safety procedures.
Assisted scheduling coordinators, assigned daily work, verified projects were completed to refinery and US NEC standards, updated work schedules.

Trained at Framatome ANP (Now AREVA and Siemens Company), Lynchburg, Va.
Empath electric motor signature analysis equipment training.

Experienced with Calibron small volume prover.
Certifying the accuracy of various types of fuel custody transfer flow meters.

Present Employment:
Contract Instrumentation Specialist; Refinery and Chemical Plant Projects

Previous Employeer: Eta Engineering Consultants (EEC) Catlettsburg, KY
Senior Instrumentation Specialist / Designer (2001-2003)

Former Contract Clients:
Marathon-Ashland Petroleum, LLC (Now Marathon Petroleum Company)
Involved in the planning/designing of Marathon Catlettsburg, KY refinery wastewater treatment major instrument/electrical control system upgrade (2001-2002).
The major refinery \"Asset Development Project\" (2003-2004)
The installation and commissioning of the largest concentration of SAAB tank radar level indicators in the world (2004-2005).
HF Acid unit turnaround and startup (2005)
A new 250,000 lbs/hr boiler installation, commissioning and startup (2004-2005).
Sulfur Recovery Unit SIS upgrade project (2006)

Marathon Petroleum Company, St. Paul, MN:
HF Acid unit instrumentation repair, commissioning and unit startup (2003).

Abarta Oil & Gas Co.:
Designed their Sulfur Recovery Unit new burner control system, installation, commissioning and startup. Control loop design, installation and maintenance.
Analyzer maintenance and certification (2002-present).

Columbia Natural Resources (Nisource):
Gas and flame detection/monitoring, and compressor shutdown system installation, commissioning, startup, routine maintenance (2001-2003).

Kentucky, West Va. Gas Co. (Equitable):
Gas and flame detection/monitoring, and compressor shutdown system installation, commissioning, startup, routine maintenance, quarterly certification (2001-2003).

Ashland Specialty Chemical, Neal, WV:
Plant P&ID updates, instrument/electrical MOC design and documentation, instrument/electrical loop drawing design and updates (2002-2003).

AK Steel, Ashland, KY:
Instrumentation Upgrade. On the job instrumentation training of plant maintenance personnel (2006).

Personal Computers:
Experienced with: Microsoft Office. Instrumentation programming and Conerstone Cal Station.

EDUCATION:
Ironton (Ohio) High School graduate
US Air Force: Electronic theory, Radio and Radar Maintenance, OJT, 4 years active duty
Ashland Inc.: 3 year industrial instrumentation apprenticeship (classroom and OJT), vendor training.

CERTIFICATIONS:
Instrument Society of America /Certified Control System Technician
ISA / CCST Level I,II,III

EPRI (Electric Power Research Institute) ICC Level I

State of Kentucky Licensed Electrician # EE35615

DOT Pipeline Liquid Certified E&I

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 1489)

Go to Search Parameters...

Brief Description

Registered EU Mech. Eng w/ 15 years experience in the oil and gas environment - North America, North Africa, Middle East,. High-energy individual whose best attribute is my ability to work well with other people.

I at DK India shoulder the responsibility of showing readers the actual position of their destinations on accurately and intricately crafted maps. The scale varies from large country maps to small walk maps, which guide those traveling by foot from one tourist attraction to another

Water Survival, Safe Gulf, Trained in CPR and First Aid, Rigging Certifications

Precision Millwright w/ Machinst and Electrical Background

Welding and electrical and management and mining class 32 hour certified fork lift operator

Manufacturing, Maintenance, Sales and Service, Application Engg, Project Engg, Administration

In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.

Hardworking, easy learner,..... Bachelor of engineering in instrumentation

Piping and Welding Supervisor QA

Prventive check-up/fixin Pump of diverse kind/calibrate labs instruments/operates main instruments in a water plants

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

Operations Supervisor - Overseas experience

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

HSE Specialist

BSc in Economics(First Class), ACICMN, AICEN

Geoscientist. I am a highly qualified, versatile geoscientist with 7 years of Petroleum industry experience, 2+ years in Processing Geophysics with a major global energy company.

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

Senior Instrumentation Specialist / Designer

In addition to academic work, my experience also includes working voluntarily, part-time and full time with both local and international organizations, as you will see in my CV. My work in these organizations hinges on working at community levels in various projects and researches.

been in oil field for 2 years, been in some type of managment for over 7 years

35 + year mechanic

15+ years experience as a highly motivated corporate and leisure travel consultant Able to communicate with people at all levels of responsibility. Experience with Inside Sales - successful cold calling and B2B sales and customer service Ability to successfully relate to and work with diverse peop

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

Logistics, Technology, Transport and Management Professional

Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)

International Business Development - Africa/Europe/Middle-East

Highly motivated Ph.D. Chemist with a broad range of skills looking for a position that involves challenge and innovation.

Power Generation Technician

Unlicensed Engineer, Diesel Mechanic

Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3

Maintenance, HVAC, MAnagement and Supervision, Safety

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

Good at learning and implementing, target oriented, flexible and can work under any conditions

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Fitter Including Machining and Diesel Fitting

Offering over 10 years of full and comprehensive experience in instrumentation works that includes Installation,Calibration,Loop Checking and Functional Checking, Pre-Commissioning, Commissioning Activities, Trouble Shooting and Repair. Maintenance works in

Landman - Full Title, Curative Work, Draft Clearance, Due Diligence and Leasing Experience

Construction manager, laborer, Class A CDL Drivers license, mechanic

Maufacturing Automation

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.

NACE Level II Certified Coating Inspector, Certified Welding inspector

MWD/LWD Specialist with 3 years of Professional Oilfield Experience, Associate Degree holder in Mechanical Engineering, Got Specialised Trainings in Academy from SCHLUMBERGER & BAKER HUGHES for "MWD Technology"

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out