Resume - To utilize my broad skills and experience in offshore and onshore oil and gas in...

Misco Jobs

Resume #28515

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:

ELECTRICIAN
July 2004 to present
MODEC Management Services Pte Ltd.
MV 9 Cuulong FPSO, Vung Tau, SR Vietnam
Client: CLJOC

* Responsible for the control and safety of all electrical equipment on the installation.
* Responsible for the isolations, issue and cancel electrical permits and responsible for all safety matters of electrical safety.
* Carry out switching including isolations and de-isolations of medium voltage (4160 V) and low voltage (450 V) electrical equipment, testing/fault finding on high and low voltage circuits.
* Operate Gas Turbine Generators (SOLAR) for power generations on the installation. Synchronization of power supplies. Performs maintenance, troubleshooting and repair.
* Do planned maintenance and unplanned maintenance on all electrical equipments on the FPSO installation and Well Head Platform. Responsible on AMOS M & P for electrical and instrument issues.
* Maintains a close check on electrical and instrumentation spares, consumables, tools and instruments and order as required.
* Perform maintenance, repair and troubleshooting on Fire and Gas System and Emergency Shutdown System.
* Assist in the commissioning of the electrical and instrument equipments while ship is still on dry dock in South Korea.
* Responsible for the maintenance and repair of Boiler Management System, Inert Gas System, Alarms and Controls on the installation.
* Responsible for the maintenance, repairs and troubleshooting of controls for Sea Water Injection Pumps, Fuel Gas Heaters and Compressors, Coolers, Motors, and Blowers.
* Workshop assessor for Competency Base Training Assessment.

ELECTRICAL SUPERVISOR (Unit Electrical Authority)
January 2002 to May 2004

Electrical Instrument Technician
August 1998 to January 2002
Rang Dong 1 FPSO, Vung Tau, SR Vietnam
Client: JVPC
SBM-TII/DML/HAMMONIA

Electrical Supervisor
FPSO II, Brazil
Client: Petrobras
May 1997 to June 1998
SBM-TII/DML/HAMMONIA

Electrical Instrument Technician
FPSO VI, Nigeria
Client: Ashland
February 1996 to March 1997
SBM-TII/DML/HAMMONIA

Instrument Supervisor
FPSO II, PHILIPPINES
Client: Alcorn
May 1992 to December 1995
SBM-TII/DML/HAMMONIA

* Responsible for the control and safety of all electrical equipment on the installation. Issue and cancel electrical permits and responsible for all safety matters of electrical safety.
* Carry out switching including isolations and de-isolations of all low voltage electrical equipment, testing/fault finding on low voltage circuits.
* Operate electrical equipment on low voltage generation system. Synchronization of power supplies.
* Do planned and unplanned maintenance on all electrical equipment on the installation. Responsible on AMOS M & P for electrical and instrument issues.
* Maintain a close check on all electrical and instrumentation spares, consumables, tools and instruments and inform Maintenance Superintendent of requirements.
* Performs maintenance, repair and troubleshooting of Boiler Management system, Inert Gas system, and Alarms and Controls on the installation.
* Responsible for the maintenance of all electrical and instrumentation equipments used in process and utility plant.

INSTRUMENT TECHNICIAN
Saudi Aramco (formerly Arabian American Oil Co.)
Uthmaniyah NGL Plant (Gas Refinery)
Dharan, saudi Arabia
October 1980 to September 1983 and July 1984 to August 1991

* Performs maintenance, repairs, installation and commissioning of all electronics, digital, pneumatics, and electro-mechanical instruments used in Gas Refinery operations.
* Performs maintenance, repairs, installation and commissioning, of all on-stream gas and liquid analyzers such as gas chromatographs, moisture, colour, oxygen, pH, conductivity, H2S and other hydrocarbon analyzers.
* Prepares new or modify installation of H2S and LEL monitors, recorders and indicators, and test run for acceptance.
* Ensure that spares and materials required for the continuation of the job, and order spares and materials as required.
* Acts as a team leader to a group of instrument technicians and repairmen, and provide technical guidance and work direction to Saudi Arabs Instrument trainees.

INSTRUMENTMAN
May 1977 to September 1980
Resins Incorporated (Chemical Plant)
Pasig City, Philippines

* Repairs, troubleshoots, and maintains all types of process control instrumentats use in Chemical Plant.
* Repairs, troubleshoots, and maintains all electronics, pneumatic and electro-pneumatics used in Power Generation Plant.
* Repairs, troubleshoot and maintains all instruments used in Utilities and Boilers, laboratory and control room.
* Perform installations, commissioning and construction works of all additional process instruments.
* Performs any other job-related task.
* Acts as team leader to assigned crew.

EDUCATION:
Diploma on ELECTRONICS ENGINEERING
Cleveland Institute of Electronics, Cleveland, Ohio, USA

Diploma on Trade Technical Education, Specialization: APPLIED ELECTRONICS
Marikina School of Arts and Trades, Marikina City, Philippines

B.S. in ELECTRONICS & COMMUNICATIONS ENGINEERING
UNDERGRADUATE, University of the East, Manila City, Philippines

SPECIAL TRAINING:
* Basic PLC Course
January 31 to February 17 2005, Meralco Foundation Incorporated, Philippines
* Hazardous Area Training
November 2002, JVPC, Vung Tau, Vietnam
* Hazardous Area Training
February 2003, SBM Marine Services (Thailand) Limited, Bangkok, Thailand
* Fundamentals of Process Control and Instrumentation
April 1978 to April 1979, Resins Incorporated, Philippines
* Bentley Nevada Vibration Monitoring Course
May 1983, Arabian American Oil company, Saudi Arabia
* Air Demand Analyzers
March 1988, Saudi Aramco, Saudi Arabia
* Micon Controllers
November 1990, Saudi Aramco, Saudi Arabia
* General Tanker Familiarization
January 1999, Consolidated Training Center, Philippines
* Shore Based Firefighting
January 1999, Consolidated Training Center, Philippines
* Basic Safety Training
January 2003, Consolidated Training Center, Philippines
* Helicopter Underwater Escape Training
April 2005, PetroVietnam Manpower Training College, Vung Tau, S.R. Vietnam
* HSC Upgrading Course (Microsoft Excel)
June 1999, Fame Maritime Foundation, Philippines

ADDITIONAL INFORMATION:
Holder of Registered Master Electrician License # 25020 issued in Manila City, Philippines on October 2001.

Holder of Certificate of Competency for ICSTCW for Seafarers issued in Manila City, Philippines on February 2002.

Holder of Philippine Passport # JJ 923831, issued in Manila City, Philippines with expiration date of 21 June, 2006.

Holder of Philippine Seaman Service Record Book # B003125, issue in Manila, Philippines with expiration date of March 2009.

Holder of Liberian Seaman Identification and Record Book # 107501, issued in Reston, Virginia with an expiration date of 14 May, 2007.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1489)

Go to Search Parameters...

Brief Description

Maintenance Manager/Welder Skills include Management, Design, welding, machinist, hydraulics, electrical, HVAC, mechanical, fabrication,and construction.

DCS/CONTROL ROOM/PRODUCTION/PROCESS OPERATOR

Mechanic Field Tech: Mechanical, Hydraulic,Electrical,Pneumatics, Welding

Attorney specializing in Land and Oil/Gas Law

To utilize my broad skills and experience in offshore and onshore oil and gas installation for process control instrumentation and electrical maintenance.

Objective Employment with a company desirous of a dedicated, hard working, creative, team player, offering 25 years of experience in the Instrumentation field.

Resume for employment

The computer skills I have apply primarily to Landmark (Unix, SunSolaris, Oracle) and Kingdom (SMT) seismic workstations. I am proficient with most PC applications as well. My work history is stable and I have good references.

Seeking a position as a driller where my experience, training, loyalty and good work habits will be an asset to your company. I have over 27 years of oilfield experience offshore and on land with expertise in the following: supervision, operations, trouble shooting, safety and derricks.

Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins

Assemble, install, wire, terminate, and test electrical panels, door devices H-O-A etc.

26 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Reliability, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment /Maintenance Engineer

Oil Industry Business Builder

journeyman electrician

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Industrial Maintenance Electrician 442A, Industrial Electrician, Instrumentation and Control Technician 447A, Instrument Mechanic, Electronic Technologist, Electrical Maintenance Technician

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

Piping supervisor. on & offshore construction/maintenance

I am currently seeking employment internationally preferably on a rotational basis

To join an organization where management skills and experience can be exercised to provide leadership in the areas of design, construction and plant maintenance utilizing my training and 25 years of experience to improve the firm's long term viability as a successful business concern.

Proficient in managing reciprocating and rotating equipment maintenance, supervising general servicing, overhaul, installation, commissioning and troubleshooting of this equipment, ability to set up and operate CMMS programs

I have over 20 years experience as a Welder/Fitter. The majority of my experience is in the Oil & Gas Industry. I am willing to relocate and/or travel.

25+ years in the pharmaceutical, chemical and petroleum industries as an instrumentation technician. Willing to travel.

I am experience Electrical Instructor who has worked for most of the major Oil and Gas companies. I have experience as both a classroom, On the job trainer and NVQ Assessor. My work experience covers the following areas Middle East, Far East and Africa.

Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

Looking for a Position to futher my skills in Sandblasting and Painting

32 years Oil Industy experience in Drilling Fluids / waste Manging / Cementing / Drilling Engineering / Business Develeopment / Project Management. Degree. experience of Cpld weatehr, HTHO, deep water, H2S wells.

Experienced Instrument and Control Technician, with more than 20-year hands-on work experience. My experience covers working for Petroleum Refineries, Petrochemical facilities and Offshore oil/gas production facilities.

Machinist manual 10plust years exp.

I can offer extensive supervisory experience in the oil and gas industry,

Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa.

For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas

25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections

Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal

ONSHORE-20 Years. Set-up and supervise Mechanical Operations & Maintenance duties. OFFSHORE PLATFORM-4 years. Oil & Gas offshore Platforms Maintenance instruction to Maintenance staff. Identify and control all replacement spares and equipment of all offshore plant and equipment.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

I have been employed in the oil and gas industry for over 20 years, 12 overseas. Supplemented by formal training, my career has enabled me to develop expertise in a wide variety of mechanical, technical, and organizational staff and work management areas.

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field.

I'm a USN Veteran Electrician with a solid background of electronics. I'm a self starter, and I have been working for myself on/off during the last year as a contract labor electrician. At this time I'm working for myself doing electrical jobs for Coastal Drilling in Corpus Christi, Texas.

A Technical personnel willing to relocate and learn and be involved in a new working environment. Can perform PC and LAN troubleshooting, installation, maintenance and configuration.

Senior directional driller

Good work ethic, current job title is foreman. Can read prints, run/route tray, terminate, build panels, troubleshoot, some experience bending tubing etc. Knowledgeable in power, automation, & pneumatics along with a good understanding of both drilling and production operations.

Yard superntendent for an offshore construction firm; additinal responsibilities; key holder, hiring, training, safety and quality control.

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out