Resume - Electrician

Misco Jobs

Resume #29114

CONTACT INFORMATION:
View contact information...

PROFILE
Licensed Industrial Electrician, Industrial Mechanic Millwright and Electronics Service Technician, possessing an Associates Degree in Industrial / Commercial Electronics Technology, coupled with over 15 years of electro mechanic and electronic troubleshooting, test, maintenance and reliability experience. Enhanced knowledge of industrial controls, data analysis. Track record of success in executing large-scale projects involving implementation of integrated PLC/PC-based control systems, power distribution and troubleshooting diverse Motion Control Systems.

MAJOR PROJECTS
Fully Automated UV Electrical Systems for customers in North America, Europe, Asia, Australia: Pickering Ontario Nuclear Power Station, City of Mannheim, City of Winnipeg, E.L.Smith Water Authority, New York Water Authority, City of Tyrone Water Treatment, Lockheed Martin Corp. N.A.S.A. White Sands Water and Air treatment.

RELEVANT EXPERIENCE

CALGON CARBON CORPORATION 1999 - 2005
http://www.catalyticcarbon.com/ccc/index.html.
High purity water treatment for pharmaceutical and fermentation processing; brewing and bottling plan process waters; Environmental, for groundwater remediation of organics; Drinking water treatment; Industrial wastewater treatment, Process water for semiconductors.

Engineered Solutions Plant, Ultraviolet Water Disinfection Division, Pennsylvania
*Senior Test and Reliability Technician
Big Sandy Plant, Carbon Reactivation Division, Catlettsburg, Kentucky
*Industrial Maintenance Electrician and Mechanic
Advanced Oxidation Technologies, Markham, Ontario (UV Division relocated in PA)
*Electric/Electronic/Assembly Service and Test Technician

TROUBLESHOOTING AND SERVICE DUTIES:
- Read, interpret and revise schematic drawings and documentation. Final assembly, quality control, start-up, test, calibration, troubleshooting and maintenance of fully automated water disinfection systems. Responsible for ensuring proper assembly and operation of each unit prior to shipment to the customer. Verify that the equipment assembly conforms to the required electrical codes (NEC, CSA, NFPA 79 and UL508). Initiate Engineering Changing Orders
- Design, layout and install electrical control panels for specialized functions, as required to update and improve existing equipment. Assemble integrated test units from module level for test execution. Assemble electrical test setups from industry standard equipment to perform all required tests on development type units - setup & operate data acquisition systems for test data capture.
- Investigate product non-conformances and assist Design Engineers to identify root causes.
- Work with the R&D team to develop next generation high performance systems in order to resolve design or quality problems. Ability to use software diagnostic tools.
- Test, diagnose troubleshoot and observe electrical, electronic and mechanical components and systems using testing and measuring instruments. Correct wiring errors, calibrate DC drive boards, scale analog sensors, check PLC I/O points, measure harmonics and three phase power quality, and collect other test data for the equipment summary report. Replace or recondition components, disassemble defective units and repair or replace worn or suspect parts. Install, maintain and troubleshoot high, low and DC voltage power distribution systems, lighting and services for the manufacturing facility as required; AC/DC protective devices, transformers, grounding systems, emergency power back-up systems.
- Carry out preventative maintenance programs to ensure proper machine performance keeping required maintenance records.
- Perform internal and external training with customers and new employees for electro mechanical assembly, testing and observe safe practices at all times in the performance of work duties. Maintain a well-organized, safe working environment that is essential in a manufacturing workplace with the presence of high voltages and water.
- Provide assistance on all safety related problems and on all production equipment, to correct any hazardous conditions and maintain a well organized, safe working environment according to recognized electrical practices and in compliance with Canadian Electrical Code, National Fire Protection Association and OSHA.

CANADA BREAD TORONTO, CANADA
http://www.mapleleaf.com/aboutus/bakery.aspx
1999 - 2000

Maintenance Electrician and Mechanic (Part time / Weekends, and Full time / Second shift)

TROUBLESHOOTING AND SERVICE DUTIES:
- Install, examine, replace, troubleshoot, repair and maintain PLC's, electrical / electronic control systems and mechanical related devices for industrial food processing and packaging equipment using testing and measuring instruments. Read and interpret drawings, blueprints, schematics to determine layout of industrial electrical and mechanical equipment / machine installations.
- Experienced in automation: Texas Instruments, Allen Bradley, Direct Logic and Siemens PLC's with strong mechanical aptitude – In charge of three high-speed food processing equipment lines including: conveyor systems, dough mixer, divider, rounder, proffer, oven, slicing, freezing, heat-sealing, metal detecting, vacuum and high-speed packaging, labeling and palletizing systems. Disassemble defective units and repair or replace worn or suspect parts. Trouble shooting and repairing AC & DC drives down to components levels. Analyze, test, and design data; develop or prepare schematics, designs, specifications, parts lists or make recommendations regarding these items. Review designs and specifications for adequacy and improvement. Install and repair electrical systems, apparatus, and electrical and electronic equipment by following Canadian Electrical Code, manual, schematic diagrams, blueprints, and using power tools, and electrical and electronic test equipment. Made minor programming changes and modifications as required.
- Performed dielectric measurements on AC/DC motors and other various electrical devices to determine the wiring condition and to ensure that current leakage is in with acceptable levels.
- Worked with production personnel as required, made decisions and prioritize jobs to production requirements.
- Carry out preventative maintenance programs to ensure proper machine performance keeping required maintenance records. Maintained and upgraded all plant equipment to Canadian Electrical Code.

STANDARD MODERN MACHINE TOOLS
http://www.standard-modern.com /CNC.html
1997 - 1999

CNC Industrial Electrician and Maintenance Electrician and Mechanic

TROUBLESHOOTING AND SERVICE DUTIES
- Responsible for electrical operations and maintenance activities.
- Test, diagnose, repair and observe electrical, electronic and mechanical components and systems.
- Supervised electrical assembly team members. Trained new employees and observed safe practices at all times in the performance of work duties. Performed maintenance activities.
- Gained experience in complete design and manufacturing process of, standard and computerized machines in compliance with Canadian Electrical Code and National Fire Protection Association.
- Worked with engineers to both improve and research new CNC machinery. Provided design support.
- Wired and tested electrical panels with diverse combinations of motion controls (Kollmorgen, Allen Bradley, Fanuc, Autocon, Fagor, Vikers, Milltronics, and brushless servo amplifiers: Kollmorgen Servostar, Custom Servo Motors, Yaskawa ).
- Installed, maintained and repaired AC/DC motors and generators, lubrification pumps/systems, mechanical, electrical alignment and auxiliary protective equipment, spindle motors, pneumatic chuck, breaking and clutch systems, automate tool changer, solenoid valves, grinder, digital readouts, transducers, sensors, encoders.
- Performed warranty, service and troubleshooting of electrical equipment in Canada and USA.

REALSTAR MANAGEMENT COMPANY TORONTO, CANADA 1996 - 1997
http://www.realstar.ca/renpro/renPropertyDetail.asp?country=1&province=12&city=57&propertyId=107

Maintenance Electrician and Mechanic

- Responsible for the operation, preventive maintenance and repair of tower building-systems equipment and facilities (Air conditioning, chillers, boilers, ventilation, dust collectors, lighting, elevators, water systems, swimming pool, TV's, audio/video systems, fire and alarm systems, emergency diesel power generators.)

WORK EXPERIENCE IN EUROPE 1978 - 1996
http://www.roumanie.com/magazine/economie/no15/consta_e.htm

TECHNOTON SERVICE ROMANIA, CONSTANTA SHIPYARD AND HARBOUR
http://profitromania.com/det_comp.php?id=848
Certified Electronics Service Technician

- Provided technical service on hazard detection systems. Repairs, calibration and start up of high temperature detection systems often used in the commercial, industrial and marine applications.
- Used a variety of measurement techniques and test equipment in checking electrical, electronic and data circuits. Diagnose and correct various electric and electronic failures.
- Troubleshot to component level electronic systems, radio receivers, audio, video, television and other professional electronic circuit boards for industrial, marine, hospital and consumer use.
- Commissioning new electronic equipment for 3 shipyards at Constanta, Midia and Mangalia for oil tankers and ferryboat ships with a maximum of 250,000 tones (deadweight).

PETROMAR - MARINE RIGS FOR DRILLING AND OIL EXTRACTION - BLACK SEA
http://www.compositecatalog.com/infocenter/RIG_DETAIL.asp?A=NAMETODETAIL&RIG_ID=297
Licensed Marine Electrician (Endorsed by The Geneva Convention)

- Preventive and predictive electrical maintenance for marine electrical equipment: AC/DC power generators, prime movers, rotary tables, draw works, self-elevating jack-up systems, heliport, etc. Mechanical repairs.
- Repairs and calibration of hazard detection systems.
- Troubleshot to component level marine electric/electronic equipment for geological research.
- Carry out preventive maintenance program on electrical equipment

CONSTANTA MUNICIPAL POWER PRODUCTION AND DISTRIBUTION
CITY OF CONSTANTA WATER TREATMENT AUTHORITY
Licensed Electrician for Power Distribution Stations and Electrical Network.

- Field testing and maintenance, installation, troubleshot and repair: distribution equipment, circuit breakers; transformers, protective relays, switchgear, motor controls and associated substation apparatus.
- Performed AC/DC hi-potential testing, power factor testing, time motion analysis, turns ratio and protective relay testing.

EDUCATION & PROFESSIONAL DEVELOPMENT

Industrial Electrician License (Red Seal).
Provincial and Interprovincial Standards Certification - Toronto, Ontario, Canada (2004)

Industrial Mechanic Millwright License (Red Seal).
Provincial and Interprovincial Standards Certification - Toronto, Ontario, Canada (2004)

Electrical Technician and Assembly Technician Certification.
Associates Degree in Electrical and Electronics Technology
United States Department of Labor, Employment and Training Administration
Philadelphia, Pennsylvania, USA (2002)

Marine Electrician International Certification (Geneva Convention Seal)
Marine Training Center, Constanta Harbor, Romania (1985)

Electrical/Electronic Technologist Diploma
College of Technology and Engineering, Constanta, Romania (1981-1983)
Marine Training Center, Constanta, Romania (1984)

Electrician for Power Stations and Electrical Network Diploma
Constanta, Romania (1978)

TRAINING COURSES

National Electrical Code Theory - Certificate of Completion
CJL Engineering, Pittsburgh, Pennsylvania, USA (2004)

Robotics Technology, Programmable Logic Controllers
Community College of Allegheny County, Pittsburgh, Pa. USA (2002)

Advanced electrical applications, theory, concepts, and practices.
National Electrical Code, NFPA 79 - 2000 Edition
Community College of Allegheny County, Pittsburgh, Pa. USA (2001)

Canadian Standards Association, Electrical Code Theory
George Brown College, Toronto, Ontario, Canada (1997)

COMPUTER SKILLS
Operating Systems: Win 98, WinNT, Win 2000 Pro, Win XP Pro
Software Packages: MS Excel, Word, AutoCAD, Direct Logic, RS Logics 500.
Power Quality Analyzers: Hioki, Walhalla, Amprobe, HarmonaLink, Fluke RPM.

INVENTION - Thermal self-adjusting assembly for UV Lamps (Patent is pending)

REFERENCE LETTERS are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 1351)

Go to Search Parameters...

Brief Description

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

AWS-CWI 30 years in the Welding Field - Pipeline, Fabrication, Piping/Structural - Onshore and Offshore - Domestic and International

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Oil field experience as field engineer, total of 10 plus years, 7 years in Middle East, worked in Kuwait, Oman, Egypt & UAE, Electronics Engineer, good exposure to IT, with driving license of GCC countries.

Maintenance Supervisor\HVAC Mechanic\Controls Technician

Manage 20 maintenance personel on repair of equipment and building ,order arts and maintain inventory, prioritize and issue work orders.

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Timed served Diesel mechanic with three years post trade experence. Specialising in heavy earth moving equipment.

Well experienced mechanic worked on wide range of plant with good references have documents ready for work permit should you be interested let me send you my cv in browse format

12 years Experience in Project QA/QC Management

CIPS qualified MSc MBA MCMI graduate, Oracle, negotiations, IT, tendering, software licensing

Diamond driller / Truck driver

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Looking for a postion in Service/Operations management based in the Baltimore area. Excellent platform and presentation skills.

Service and maintenance of various heavy equipment

Journeyman Electrician Red Seal Endorsement

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

I have 8 years extensive Coded Welders experience in Hydr Industry. I also did a Welding Inspectors Course Level 1 in 2007. I do however not have any experience in Off Shore Ind, but I am very eager and willing to learn.

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

my resume consists on my career on my trade of electrician. I send this resume to apply the position of rig service electrician.

Experianced and competant in seismic acquisition and interpretation

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

Working as HSE Mngr. /Eng. /Supervisor postions in RoK and Ex-Soviet Republics, on both oil field and construction HSE managment and supervision for multi-national companies, BSc Civil Engineering and 10 years civil engineering background,reside in RoK, holder of Residence and Work permit for RoK

Expert in basic and detail engineering services for EPC execution of Power and Oil/Gas Plant. Global exposure from concept to commissioining support.

Electrician - Certified

IOSH Managing Safely (UK Certification)

Industrial Electrician by trade who is now working as a Commissioning Operations Maintainer in Explosives and LNG facilities.

37 year old man seek an employment or contract off-shore as a roustabout, mechanic, motorman, fitter or welder

A technocrat with proven experience in the filelds of Marketing and business development, general management of multinational Industrerial valves manufacturing organizationas with an experince of 14 years.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

24 years in oilfiled \ Safety Rep.\ EMT

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

Firefighter, Search and Rescue Instructor, Safety Instructor, First Aid Instructor, Emergency Response Coordinator, Team Leader, Crew Chief,

Free! Advanced level Paramedic; 26 years experience: Emergency/Remote/Occupational/Tactical experience; Instructor/Supervisor/Training Manager

Software Developer .NET, Java SQL

I am a machinist by trade, got into service tech., then field machining and enjoyed it.

MECHANIC/WELDER/GENERAL MAINTENANCE & REPAIRS

BSc, 10 years field/management experience in pipeline integrity, pipeline inspection, direct assessment, risk models, project management, surveys, non destructive testing etc.

Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors

I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

The last ten years I worked as full time machinist, production supervisor/fitter, and maintenance supervisor hands on, technician/ supervisor in heavy mining and industrial environment.

Expertise in Project Engineering, Cadd Management & related fields.

Previous warehouse work..good hard worker ,fast learner

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

Allen Bradley Processor Class- Certificate, Siemens Processor Class-Certificate, GE Processor Training- Certificate, First Aid/ CPR, Microsoft Excel training Class, Arc Flash Training, SAP, MP2, MS Project

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out