Resume - Instrumentation Supervisor

Misco Jobs

Resume #32250

CONTACT INFORMATION:
View contact information...

I am an Instrument Engineering Technologist with valuable experience in construction, commissioning, and maintenance of oil and gas facilities. As an Instrument Project supervisor, and Commissioning coordinator I have gained valuable management and personnel skills and possess a good technical aptitude of the field of instrumentation. Previous employers will affirm that they entrusted me with major responsibility and that I adapt well to change. I look forward to new challenges and strive to be the best at what I do. I enjoy working in a team environment where safety and professionalism is of the utmost importance. Working on the Syncrude UE-1 up grader expansion, I had the privilege to work along side professionals from many different nationalities and enjoy this very much. I am married to Thai national and am seeking international employment which will allow me to live and work out of Thailand.

EMPLOYMENT

11/04-Present Commissioning Coordinator, Emerson Process Management
Syncrude UE-1 Project, Ft. McMurray, Alberta

Commissioning Coordinator for the power plant and water treatment plant DCS modernization. Modernization involves the upgrade from Fisher Provox platform to Honeywell Experion platform. Modernization involves verifying the existing I/O to the new Honeywell Experion platform prior to swing over.

09/03 – 11/04 Instrumentation Maintenance, PowerComm
Hardisty, Alberta

Contracted full time to Gibson Energy, where I perform maintenance for their Pipeline Terminal, Pipeline Pumping Stations and Fractionation facility. Research, provide quotes, and purchase all instrumentation devices and systems. Troubleshoot and Program Allen Bradley PLC systems such as SLC 500 and PLC 5. Calibrate, troubleshoot, and maintain plant analyzers such as Gas Chromatographs, Online Solartron Densitometers and Viscometers, and water in oil analyzers. Gained experience in Telvent Scada systems and Omni flow computers. Commissioning and start up of new plant projects. Provided procedures and updates to Maximo maintenance system.

04/03-09/03 Instrumentation Project Supervisor, PowerComm
EnCana High Ethane Recovery Project, Empress Alberta

Overlooking and managing all aspects of instrumentation calibration, installation, and
Quality Control. Commissioning and start up support.

10/02-06/03 Communications Commissioning, PowerComm
Shell Scotford Upgrader, Fort Saskatchewan Alberta

Revised and commissioned Modbus RS-485 communications for Electrical Heat Trace panels throughout every unit. Worked in conjunction with Colt Engineering to review Allen Bradley DeviceNet communications installation and present problems and solutions to network problems. Added a PC interface for each Allen Bradley DeviceNet network. Provided Instrumentation and electrical support to plant maintenance staff.

05/02-10/02 Instrumentation/Electrical construction and commissioning, PowerComm
Enbridge, Kirby Lake Compressor Terminal Project.

Installation and commissioning of both instrumentation and electrical systems. Performed all communications installation of modbus communications for Multilin high voltage relays and Rotork valves. Terminated PLC cabinets and other electrical devices. Involved in plant startup and commissioning.

04/02-05/02 Instrumentation Construction, and Commissioning, PowerComm
CNRL Wolf Lake Tank Farm Project, Bonnyville, Alberta

Installed, Calibrated, and Commissioning of all instrumentation. Gained some valuable experience with Endress Hauser radar level transmitters, as well as Fisher Provox.

10/01-04/02 Instrumentation Maintenance, Construction, and Commissioning, PowerComm
Husky Oil, Lloydminster, Alberta

Managed all aspects of instrumentation calibration, installation, commissioning and start up for Husky Oil Celtic Steam Pilot project. Gained valuable experience in steam generator control. Commissioning and start up of Husky Oil Lashburn Treater Project. Performed different maintenance tasks for a variety of Husky sites.

05/01-10/01 Instrumentation Calibration and Construction, PowerComm
Williams Energy Polypropylene Project, Redwater, Alberta

Performed over eight hundred calibrations for a wide variety of instrumentation. Performed construction tasks such as running tubing bundle and mounting instrumentation.

02/01-05/01 Instrumentation calibration and control valve repair, PowerComm
Edmonton, Alberta

Performed calibrations for a wide variety of instrumentation. Rebuilt a wide variety of Fisher control valves and associated Fisher products.

EDUCATION

03/04/2003 Instrumentation Technician Journeyman
Alberta

01/06/1998 Instrumentation Engineering Technology Diploma
Northern Alberta Institute of Technology

28/04/1995 Accelerated Pre Technology Diploma
Northern Alberta Institute of Technology

27/06/1994 High School Diploma,
GHP Primeau, Morinville, Alberta

CAPABILITIES
* Speak Thai and French
* Experience with numerous computer programs
* Good management skills
* Learn quickly and enjoy learning
* Can deal with high stress situations

CERTIFICATION
* RSLogix Training
* Omni Flow Computer Training
* Interprovincial Certification
* H2S Alive training
* Emergency First Aid Training

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 1470)

Go to Search Parameters...

Brief Description

Seasoned expat. Strong broad-based tech skills and extensive project O&M exp in frontier third world environments. Road const, water rehab, airports, infrastructure rehab. Extensive EPL/EPC exp as Project Eng.

Possess 5 year s experience in Administrator Buyer and Planner .In depth practical knowledge management skill in logistic or admin. Mature with strong work ethic towards team support or report dateline. Proficient in both spoken and written English and Bahasa Malaysia and advantage 1 native language

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

I believe my experience in organization, projects and maintenance in the world largest methanol - petrochemical production site and other experience in foreign trade can help in implementation of your company's highest production, organisational and marketing standards.

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Instrumentation Supervisor

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

I am a hard worker that can follow directions I'm safety concious totally drug and alcohol free with experience in a multitude of different fields

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

Journeyman Instrument Technician with 7 years experience in the oil and gas industry

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

Blueprint Reading - Mig, arc and gas welding

Have good knowledge of the principle, practice and procedure of geology. Familiar using a personal computer with Mapinfo, Microsoft Office, Microsoft PowerPoint, and email / internet systems. Fair in English , both oral and written.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

Oil and Gas Leasing, Mineral Title research for the purpose of Leasing, Building Drilling Title Runsheets for Title Attorneys and Title Opinions, Title data entry, Deed plotting, Right of Way Title, Right of Way Acquisition

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Security, life support, camp management, logistics

• B.Sc (Hons) Geology • Diploma in Computer Studies and Programming, 1999

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

Truck Driver with experience in oil field activites.

Electrical engineer (2 years experience),researcher(1 year experience)

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

I am a motivated graduate with qualifications in Geological Engineering, Applied Petroleum Geoscience and Quantity Surveying and I am proactive, confident with excellent communicative skills. I am flexible in my approach work, accurate and punctual. I am focussed and motivated with eye for details

I am a trained geologist with HSE certificate and willing to relocate and work under challenging conditions

I am a seasoned QMS Internal & External Auditee, a trained QMS Internal Auditor and Document Controller, currently managing the implementation of ISO 9001:2008 (QMS) for a company in Nigeria. I have over five years experience in both Oil and Gas industry and Insurance Company working as document con

Strong English verbal and written communication skills • Specialized knowledge in MS Office suite- Outlook, and filling out DD Forms • Computer literacy in word processing, database maintenance, and spreadsheet software

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out