Resume - CSWIP Senior Welding Inspector

Misco Jobs

Resume #32596

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:

CSWIP Senior Welding Inspector (Grade 3.2), 2003
Certificate No. 9327 (expiry 23-03-2008)
The Welding Institute, Cambridge, United Kingdom

Registered Mechanical Engineer, 1981
Registration No. 21447
Professional Regulations Commissions, Philippines

Ultrasonic Testing, 1995
Certificate No. 127/UT/95
European Marine Contractors Ltd.
NDT Personnel Qualification Certification

Magnetic Particle Testing, 1995
Certificate No. 127/MT/95
European Marine Contractors Ltd.
NDT Personnel Qualification Certification

Ultrasonic Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Radiographic Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Magnetic Particle Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Liquid Penetrant Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

OBJECTIVE:
Growth Potential and career advancement which could benefit the company and myself

WORK EXPERIENCE:

McDERMOTT CASPIAN CONTRACTORS, INC.
Baku, Azerbaijan
July 17, 2003 – September, 2004
Senior Inspector (QC/NDT) A

Azerbaijan Int'l Oil Co.(AIOC)/British Petroleum (BP) Azeri Pipeline Project

Monitored front end activities of the pipelaying of 30 inch and 28 inch pipeline in offshore Baku, Azerbaijan (Azeri Phase 1) on the Caspian Sea including beach pulls were completed for the two lines onboard Pipelay Barge Israfil Guseinov and fabrication of Subsea Spools onshore. Involved in the Welding Procedure Qualification for Azeri Phase 2 Pipeline.

VELOSI / SARAWAK SHELL BERHAD
Miri, Sarawak, Malaysia
August 20, 2001 – October 7, 2002
Senior Engineering Surveyor/Senior Welding Inspector

M1 Platform Hook-UP Expansion Project

Worked as a Senior Welding Inspector on M1 Platform Expansion which involves the strengthening of the 100 meter bridge connecting the Production and Living Quarters Platform to the Riser (drilling) Platform, installation of Extension Panels on both platforms and installation of new piping systems.

Jintan Field Development Project
Involved from the formulation of the proposed Welding Procedure Specification (pWPS), Welding Procedure Qualification Test (WPQT), Welding Procedure Qualification Record (WPQR) and the Welding Procedure Specification (WPS), Welder's Qualification Testing (WQT), review of all pertinent documentation prior to the installation and during the installation stages of the projects.

E11R-B Platform
The work scope consist of installing a 32 inch riser with a external monel coated pipe at the splash zone area

JNDR-A & M1DR-A Platforms in offshore Sarawak area.
The work scope consists of installing a 7.634 km x 24 inch API 5L X65 grade carbon steel pipeline with a internal clad 4mm AISI 316L grade stainless steel between the JNDR-A to M1DR-A installation including risers and expansion spool.
M4 &F23SW Platforms in offshore Sarawak area
The work consists of two gas lines, a 12inch X 7 kilometers and a 14 inch X 10 kilometers, both are internally cladded with 3mm 316L stainless steel including installation of risers, expansion spool and PLEM.
- Witnessed the Welding Procedure Qualification Testing at the Serimer Dasa, Mitry Mory, France Welding Workshop, including the mechanical testing at the Institut De Soudure in France.
- Witnessed the Welder's Qualification Testing at Akra workshop in Seremban, Malaysia and onboard the pipelaying barges (DLB 264 & Kuroshio 2)
- Witnessed the Mechanical Testing of the Manual welding Procedure Qualification at PTS in Singapore.
- Reviewed of QC documentation prior to commencement of the projects.
- Monitored pipelaying activities on board the pipelaying barges.

ANDISON INDUSTRIAL SALES, INC. (Marketing and Sales Department)
Diego Silang St., Batangas City, Philippines
May 1999 to July 2001

VELOSI / SHELL PHILIPPINES EXPLORATION B. V. (Onboard PLV SOLITAIRE)
Alabang, Muntilupa City, Philippines
June 2000 to January 2001
Welding Inspector/Quality Surveyor

Shell Philippines Exploration B. V. is one of the proponents for the development of the Palawan Malampaya Natural Gas Project, it is the largest natural gas find in the Philippines to date and is expected to be on stream by the later part of 2001 and is estimated to produce 2,700MW power from the 3 Power Plants of Sta. Rita, San Lorenzo and Ilijan all in Batangas. The project is estimated to cost US$ 4.5B.

The project will deliver deep water natural gas to power plants onshore via two 30 kilometers, 16 inch inconel internally cladded pipelines thru a platform and thru a 504 kilometers, 24 inch pipeline.
- Maintained awareness of relevant Quality, Health and Safety Engineers requirements which includes proper housekeeping.
- Monitored the pipelaying and other related activities onboard PLV SOLITAIRE, which is a dynamic positional vessel capable of laying more than 7 kilometers of pipeline in a 24 hours period.
- Carried out and documented the visual examination of welding activities as to the conformance or non-conformance with approved standards and criterions.
- Monitored the Qualifications and Testing of other items related to the project.

THERMAL ARC PHILIPPINES, INC (Marketing and Sales Department)
Pelbel Building, 2019 Shaw Boulevard, Pasig City, Metro Manila, Philippines
April 1997 to September 1998

SAIPEM AG / EUROPEAN MARINE CONTRACTORS, LTD (QA/QC Department)
Badenestrasse 15, 8004 Zurich, Switzerland
March 1992 to December 1996
QA/QC Engineer

Worked onboard laybarges Castoro 6, Castoro 2 and SEMAC 1 in the North Sea, Mediterranean Sea, Gibraltar Strait and Irish Channel.

List and location of some of the projects I have worked

ROYAL DUTCH SHELL - North Sea
STATOIL - North Sea
CONOCO - North Sea
TOTAL PETROLEUM - North Sea
RANGER - North Sea
TRANSMED - Mediterranean Sea
NORSKE HYDRO - North Sea
BRITISH PETROLEUM - North Sea
CLYDE PETROLEUM - North Sea
BROKEN HILL PROPRIETARY(BHP) - North Sea
BRITISH GAS - Irish Channel
EUROMAGHREB - Gibraltar Strait

- Maintained awareness of relevant QHSE system requirements.
- Monitored welding operations thru visual inspections upon completion of welding and during repair.
- Reviewed, familiarized and identified all areas of responsibility contained within European Marine Contractors, Ltd. (EMC) quality plans, procedures and relevant client specifications.
- Carried out and documented inspections of welding, including:
- Fit-up, consumable storage/usage and pipe cleaning.
- Observance of welding parameters, reporting adverse trends to production personnel.
- Verified that welders and consumables are qualified/approved for the process.
- Verified weld repairs in accordance with the qualified weld procedure specification (WPS).
- Identified and reported nonconformity.
- Ensured all NonDestructive Testing (NDT) equipment including probes and calibration blocks, etc., is maintained in good working conditions at all times.
- Performed and documented pipe-end NDT (Ultrasonic Testing (UT) and Magnetic Particle Inspection (MPI) for lamination checks following cut-out and prior to re-welding) and informed the appropriate supervisor of the results. Examinations are reported on the correct proforma and presented to QC Supervisor.
- Additional duties within own experience and capability as directed by the QC supervisor.

ENGINEERING & CONSTRUCTION CORPORATION OF ASIA (Industrial Services Department)
Benpres Building, Exchange Road, Pasig City, Metro Manila, Philippines
June 1996 to March 1992
Manager-Industrial Services Department (ISD) (1987 – 1992)

ISD is the Quality Control Quality Assurance Department and is a profit center thus it must earn its revenue by delivering services to the construction department of the Company and to other companies that required its services. The Department is offering all methods of Non-Destructive Testing, Visual Examination and Post Weld Heat Treatment including Preheating Services.
- Managed 15 professionals including supervisors, a warehouseman and a department secretary.
- Was responsible for the Marketing of offered services to various companies including the three largest oil companies, power generators and large construction firms.
- Sustained the needed operating expenses of the Department and contributed largely to the overhead of the Company.

Head-Nondestructive Testing Group (1986 – 1987)
- Managed 10 professionals composed of engineers and technicians in the operations of the group.
- Conducted trainings and seminar to various companies and individuals seeking knowledge of the different aspects of Non-Destructive Testing, which was a revenue generating activity for the Company.
Note: I was seconded to ALKHAJA COOPERHEAT from FIRST HOLDINGS INTERNATIONAL, INC. then transferred to ENGINEERING CONSTRUCTION CORPORATION OF ASIA, the latter two being sister companies.

ALKHAJA COOPERHEAT (NDT Department)
United Arab Emirates
The Sultanate of Oman
April 1985 to April 1986

Administrative Assistant/NDT Inspector (1985 – 1986)
- Performed Non Destructive Testing, i.e. Radiographic, Magnetic, Dye Penetrant and Ultrasonic Testing activities to different clients all over the United Arab Emirates and the Sultanate of Oman
- Prepared the necessary reports and evaluation of the test results
- Maintained and repaired Non Destructive Testing equipment

FIRST HOLDINGS INTERNATIONAL, INC. (Skills Training Center)
7232 Malugay St., Makati City, Philippines
June 1983 to May 1986

Administrative Assistant (1983 – 1985)
The training center has several trainors in the field of Pipefitting, Heat and Ventilation Air Conditioning (HVAC), Welding, Insulation, Electrical and Plumbing.
- Supervised five professional office workers made up of secretaries, clerks, a messenger and a warehouseman.
- Attended meetings with the staff of the Vice President of the Company.
- Prepared all letters and memoranda of the office.

WELLTRADE (Saudi Arabia) LTD (NDT Department)
Mansour St., Al Khobar, Kingdom of Saudi Arabia
January 1982 to March 1983

Senior Radiographic Testing Technician
Reported to the General Foreman.
- Supervise 10 technicians and engineers in the performance of Radiographic Testing in the eastern provinces of the Kingdom of Saudi Arabia
- Performed Radiography on other special projects as required by the Company
- Trained technicians and engineers on the proper safety procedures and operations of Radiography equipment.
- Prepared reports and timesheets for billing purposes clients.

Industrial Inspection (International) INC (NDT & Branches Division)
Pasong Tamo St., Makati City, Philippines
October 1980 to November 1981

Radiographer/Technical Assistant & Training Officer
- Performed Radiographic Testing all over the Philippines.
- Prepared documentation and reports on the results of tests evaluation.
- Led other technicians in the performance of their job.
- Acted as the Radiological Health and Safety Officer of the Company as certified by the Course and Examination given by Philippine Atomic Energy Commission (PNRI now), which I was fifth of the class.
- Trained new employees in the basics of Radiography and safety in the performance of their work.
- Assisted the Division Manager in the preparation of technical matters.

EDUCATION & CERTIFICATION:

Bachelor Of Science in Mechanical Engineering, 1980
Mapua Institute of Technology, Muralla St., Intramuros, Manila, Philippines

CSWIP Senior Welding Inspector (Grade 3.2), 2003
Certificate No. 9327 (expiry 23-03-2008)
The Welding Institute, Cambridge, United Kingdom

Registered Mechanical Engineer, 1981
Registration No. 21447
Professional Regulations Commissions, Philippines

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1489)

Go to Search Parameters...

Brief Description

Crane specialist. Heavy duty mechanic, mobile crane operator, trade licences. Towercrane ticket, and presently apprenticing as milwright to further my skills. Operate and repair many makes models of hoisting equipment. Rigging, inspection, supervision skills + more 20yrs exp with industry leaders

Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence

Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.

14 years Experiences in welding inspection, quality assurance and quality control, NDT inspection and documentation with major middle east oil companies. Qualification: Diploma in Mechanical engg, CSWIP 3.2, BGAS Grade 2, NDT level 2 in 4 methods

Caterpiller Trained Heavy Diesel Fitter with open cut and underground Experiance on Caterpiller, Tamrock, Leiberherr equipment

I have worked as a Tour push onshore Venezuela and as a driller offshore Qatar. I am now working as a drilling consultant here in Canada.

Experience has been gained operating from supervisory, management and design standpoints on a variety of E&IC contracts within the U.K. and overseas.

I aim at working as a fresh-graduate chemist or a laboratory technician at an entry level in a chemical, food, pharmaceutical, oil or related companies and industries.

To find work as a Certified Journeyman Millwright, with Inter Provincial Red Seal

Offshore Field Engineer Pipeline Electrical Automation Mechanical

I have been in the oil and gas industries for 13 years doing project coordinations and managing maintenance of equipments

Free! A young resilient Mechanical Field Engineer with the drive to undertake challenges and a Expertise in Supervising safety,mechanical maintenance,including pumps and turbines,spares and material control as well as managing projects

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

Automation & Control System Engineer - PLC, SCADA, DCS, RTU, Software, Industrial Networking

I am certified welder and can perform different welding procedures such as 5G, 6G SMAW.and SAW. I have more than 8 years working experience in various manufacturing and Oil and GAs companies in different country such as Saudi Arabia, China and Malaysia. My current job was in KNM Special Process Equi

CSWIP Senior Welding Inspector

Skilled welder fitter, hard working level headed man who is ready to take on any task that is thrown my way. I am a fast learner and I m easy to get along with and I get along with others as well. I think I would be an asset to your company.

State of Alaska Licenced Journeyman

Heavy Lift Manager

Skilled Senior LEVEL II RT Technician with 30 Yrs experience

2D / 3D Design Consultant, 13 years Oil & Gas Experience starting with 4 year mechanical apprenticeship. Having worked in Aberdeen, Scotland and Oslo, Norway on surface and subsea production equipment (EDP, LRP, BOP, Xmas Trees, etc).

Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have recently been laid off because of lack of work . I appreciate your consideration and look forward to hearing from you. Sincerely, Doug McKay

Millwright, Pipefitter, Construction: I'm expressing my interest in a position with your company. Based on my skills, I am confident that I would be a great addition to your team.

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Heavy Duty Mechanic

WellSite Supervisor

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

Electronic/ Mechanical Tech

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.

Machinist,C.N.C. / Manual 20+yrs. experience

34 years in instrumentation industry.

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training

Professional Contract Chef / EMR Available

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Very experienced Welder, Pipe fitter, Foreman

Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager

A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con

I have over 16 years experience in Health, Safety, and Environmental (HSE) and have 4 years experience working overseas with employees from various cultures.

22 years heavy equipment operator

Piping Draughtsman with 2 years experience

I am looking for full time employment in a general labourer capacity

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Engineering

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

I have over 10 years as a driller and derrickhand

Experience in pipeline, Power Plat Installation

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out