Resume - Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have re...

Misco Jobs

Resume #3417

CONTACT INFORMATION:
View contact information...

Professional Experience

Willbros Engineers Inc.
August 2001 - May 2003 Crew Chief Tulsa, OK
Pipeline preliminary and as built locating boundaries and staking easements for right of way and centerline. Preparing green sheet's and also staking out compressor stations, anomalies, and valve sites.(Using GPS and conventional Data Collection)

Aerial Data Service Inc.
May 2001 - August 2001 Crew Chief Tulsa, OK
Setting control networks establishing horizontal and vertical values using static GPS and digital levelling.

Cimarron Surveying and Mapping Inc.
March 1999 - May 2001 Crew Chief Oklahoma City, OK
(Preliminary Pipeline and Fiber Optic projects) Locating boundaries and staking easements using GPS and Total Station Data Collection.

Harden & Associates Inc.
July 2000 - April 2001 Crew Chief Tulsa, OK
Staking and Collecting data for boundaries,Section and topography surveys.
(Using static GPS and Total Station Data collection)

L. W. Survey
October 1998 - December 1998 Crew Chief Duluth, MN
(Pipeline Asbuilt)Centerline and Right-of-way staking,Profiles,etc.Using Total Station Data Collection.

City Of Tulsa
February 1989 - January 1995 Engineering Aid II Tulsa, OK
(Operating Total Station Data Collection)
on all phases of city owned projects associated with water, sewer, and street improvements. Also served as locater for city utilities and sub-contractors. And other utility companies associated with Okie One-Call System.

Education
Tulsa Community College

* Surveying 1
* Surveying 11
* Land Law (1991)
* Land Law (2000)

(REFERENCES AVAILABLE UPON REQUEST)

Professional Experience
Willbros Engineers Inc.
September 2001 - May 2003 Instrument Operator Tulsa, OK
Pipeline preliminary and asbuilt using Trimble Pro XRS Pathfinder DGPS with TSC1 data collector and Topcon Total Station data collection.(Trimble GPS and conventional software version's used.)

Aerial Data Service Inc.
May 2001 - August 2001 Instrument Operator Tulsa, OK
Establishing horizontal and vertical control networks applying static GPS using Trimble 4000 receivers and Topcon digital leveling for vertical control.

Cimarron Surveying and Mapping Inc.
March 1999 - May 2001 Instrument Operator Oklahoma City, OK
(Preliminary and Asbuilts) for Pipeline and Fiber Optic Routes Using Nikon Total Station and Trimble Pro XRS Pathfinder

Staples Direct
August 2000 - February 2001 Sales Associate Tulsa, OK
Taking office supply orders over the telephone.

L.W. Survey Inc.
October 1998 - December 1998 Instrument Operator Duluth, MN
Pipeline Asbuilt using TDS Data collection with Lietz Total Station.

Education
Woodland High School
June 1987 High School
Business Baileyville, ME

(REFERENCES AVAILABLE UPON REQUEST)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1469)

Go to Search Parameters...

Brief Description

I have worked as a Tour push onshore Venezuela and as a driller offshore Qatar. I am now working as a drilling consultant here in Canada.

Experience has been gained operating from supervisory, management and design standpoints on a variety of E&IC contracts within the U.K. and overseas.

I aim at working as a fresh-graduate chemist or a laboratory technician at an entry level in a chemical, food, pharmaceutical, oil or related companies and industries.

To find work as a Certified Journeyman Millwright, with Inter Provincial Red Seal

Offshore Field Engineer Pipeline Electrical Automation Mechanical

I have been in the oil and gas industries for 13 years doing project coordinations and managing maintenance of equipments

Free! A young resilient Mechanical Field Engineer with the drive to undertake challenges and a Expertise in Supervising safety,mechanical maintenance,including pumps and turbines,spares and material control as well as managing projects

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

Automation & Control System Engineer - PLC, SCADA, DCS, RTU, Software, Industrial Networking

I am certified welder and can perform different welding procedures such as 5G, 6G SMAW.and SAW. I have more than 8 years working experience in various manufacturing and Oil and GAs companies in different country such as Saudi Arabia, China and Malaysia. My current job was in KNM Special Process Equi

CSWIP Senior Welding Inspector

Skilled welder fitter, hard working level headed man who is ready to take on any task that is thrown my way. I am a fast learner and I m easy to get along with and I get along with others as well. I think I would be an asset to your company.

State of Alaska Licenced Journeyman

Heavy Lift Manager

Skilled Senior LEVEL II RT Technician with 30 Yrs experience

2D / 3D Design Consultant, 13 years Oil & Gas Experience starting with 4 year mechanical apprenticeship. Having worked in Aberdeen, Scotland and Oslo, Norway on surface and subsea production equipment (EDP, LRP, BOP, Xmas Trees, etc).

Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have recently been laid off because of lack of work . I appreciate your consideration and look forward to hearing from you. Sincerely, Doug McKay

Millwright, Pipefitter, Construction: I'm expressing my interest in a position with your company. Based on my skills, I am confident that I would be a great addition to your team.

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Heavy Duty Mechanic

WellSite Supervisor

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.

Machinist,C.N.C. / Manual 20+yrs. experience

34 years in instrumentation industry.

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training

Professional Contract Chef / EMR Available

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Very experienced Welder, Pipe fitter, Foreman

Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager

A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con

I have over 16 years experience in Health, Safety, and Environmental (HSE) and have 4 years experience working overseas with employees from various cultures.

22 years heavy equipment operator

Piping Draughtsman with 2 years experience

I am looking for full time employment in a general labourer capacity

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Engineering

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

I have over 10 years as a driller and derrickhand

Experience in pipeline, Power Plat Installation

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

Previously worked for a oil and gas brokerage firm in Houston, Tx at the end of 2008. Experience as leasing agent and experience in running title in Texas.

CSWIP 3.2,BGas Grade 2,ASNT Level 3 in RT,MT Level 2 in RT,PT,MT,UT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out