Resume - Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark V...

Misco Jobs

Resume #3673

CONTACT INFORMATION:
View contact information...

Summary:

I offer over twenty years of technical experience in all phases of applications of instrumentation and controls in the petro-chemical, refinery, power plant and co-generation facilities. This includes construction, installation, maintenance, calibration and trouble-shooting of process and control loops.

Experience:

GE Baglan Bay Project Port Talbot, Wales
HRSG Commissioning Engineer
Responsibilities included Loop checks; functional testing of all the controls logic and modifications to the GE Mark VI HRSG code. Further responsibilities included process tuning and graphic modifications, on the first 500MW gas fired single shaft steam cooled combined cycle unit.
(06-02 to 10-03)

Tuas Stage II Power Station Singapore
BVI/Mitsubishi Project
Lead DCS Commissioning Engineer
Responsible for the Factory Acceptance Test (FAT) of the control logics on two 360 MW gas fired single shaft units. Activities included the design, implementation and testing of logic changes to enhance the existing DCS configuration. Further duties incorporated the supervision of two fellow DCS engineers as well as two Foxboro TA's assigned to the project, initial power-up, installation and testing of the Foxboro I/A 6.2, interfacing with the owner/owners engineers. Loop testing of over 12,000 I/O plant wide, finalization of the mark-ups (red lines) to be revised and issued to project.
(12-00 to 03-02)

BVI/TECO Tri Energy Project Ratchaburi, Thailand.
Instrumentation Start-up Engineer
On a 700MW facility consisting of two GE Frame 9 FA one GE Steam Turbine. Responsibilities included Instrumentation commissioning and pre-performance instrument calibrations. Initiated the installation to automate gas block valves from the DCS. Plant and DCS support during the final stages of completion of the project.
(05-00 to10-00)

JBV San Jose, Guatemala (JA Jones/Black & Veatch)
San Jose Power Station
DCS Startup Engineer
For the commissioning of one DB Riley coal fired unit with a 122 MW Mitsubishi Steamer, equipped with a Foxboro I/A system. Responsible for loop checks, function testing and the modifications of the control logics. Process tuning and graphic modifications along with operational support. Verified proper system installation and grounding.
(07-99 to03-00)

Thai/Nepco Ayutthaya, Thailand
Rojana Power Project
DCS Startup Engineer
For the commissioning of two IHI 47mw gas turbines and one ABB 38mw steamer, equipped with a Foxboro I/A system. Responsibilities included Loop checks; function testing of all the controls logic and the modifications. Further responsibilities included process tuning and graphic modifications. Also assisted in the resolution of instrumentation problems throughout the plant.
(01-99 to 06-99)

Stone & Webster Gurut, Indonesia
Amoseas Geothermal Project
DCS Startup Engineer
Duties consisted of the startup of the Bailey INFI 90 system and loop verification of the plant controls and instrumentation on an 80MW unit. Further responsibilities included the function testing of the controls, logic and graphic modifications. As well as plant documentation that pertained to my responsibilities.
(09-98 to 01-99)

Fluor-Daniel/Air Products Map Ta Phut, Thailand
Bangkok Co-generation Co. ( BCC ) 112mw Facility
DCS Startup Engineer
Duties consisted of functional testing and modifications to both the logic's and the graphics of the Bailey INFI 90 system. Insured proper grounding and installation procedures were followed during the installation of the system. Worked with the Thai technicians assigned to Fluor-Daniel and the contractors to insure that the instrumentation was installed according to details and that the calibrations were performed properly.
(02-98 to 09-98 )

Black & Veatch Melaka, Malaysia
Melaka Combined Cycle Conversion Project
Instrument & Controls Startup Engineer
Assigned as a commissioning and startup engineer. Responsibilities included the input-output termination and the logic verification of the instrumentation to the Bailey INFI 90, further responsibilities included the testing of the DCS I/O for the 415v, 6.6kv, 11.5kv and the 132kv switchgear. Setup of the motor operated valves and the Copes-Vulcan control valves. Technical advisor for field modifications of instrument installations to the instrumentation construction contractor. Startup of the Nooter-Eriksen HRSG 1&2 and the G.E. 120mw steam turbine.
(05-97 to 01-98)

Elf Atochem Calvert City, Kentucky
DCS Start up Engineer
For the commissioning of the F-134A refrigerant plant, equipped with a Bailey Infi 90 DCS and a Triconix ESD system. Responsibilities included tag and trend database configuration as well as cad modifications to the EWS (function codes). Also involved in the graphics revisions and the tuning of the system loops.
(03-97 to 05-97)

GE/OVA Elektrik Istanbul, Turkey
DCS Start up Engineer
For the commissioning of the balance of the plant of this GE 320 mw 209E IPP equipped with a Foxboro I/A DCS. Accountable for the DCS compound and block configuration revisions and alarm prioritizing, etc. Training and supervision of the Turkish I&C personnel in field instrument calibration and DCS configuration. Field instrumentation consists of Foxboro Intelligent Transmitters, Nuovo Pignone valves and Eckardt positioners.
(08-96 to 11-96)

Bayer Premier Co. Map Ta Phut, Thailand
Instrumentation Supervisor
Responsible for the instrumentation group and field modifications of the poly and cwd areas. Field responsibilities included instrumentation calibration and revisions, consisting of tubing, piping, installation, grounding, etc. The DCS is the Fisher Provox, I have experience on this system comprised of engineering unit and range modifications loop verification of 4-20 ma analog input/outputs, discrete input/outputs, etc. Interfaced with management on scheduling and the updating of plant documentation and verification ( As builts ) of the electrical and instrumentation drawings.
(05-96 to 08-96)

Rayong Refinery CO. LTD Map Ta Phut, Thailand
Control Room Coordinator/Supervisor
Assignment included the supervising and training of the Thai technicians in the use of the Foxboro I/A DCS revision 4.2 as well as the configuration, comprised of engineering unit changes, compound block configurations ( AIN's, AOUT's, CAlC, LEAD/LAG, ETC. ) process and control loop tuning. The failsafe system is the Pepperl &Fuchs, I was responsible for the testing and the acceptance of this system on all of the compressors and the light oil systems. Also assisted in the terminations and check out of the Foxboro I/A and Pepperl & Fuchs interconnection cabinets. Direct involvement in the refineries commissioning and start up.
(07-95 to 05-96)

Enron Corp. Houston, Texas
DCS Startup Engineer
Responsible for the graphics display changes, loop tuning and the modification of the compound and block configurations on the Foxboro I/A 4.2
(04-95 to 06-95)

Alabama Power Demopolis, Alabama
Instrument Supervisor
Responsible for commissioning and start up of five GE frame seven 80 mw gas turbines controlled by the GE Speedtronic Mark V DCS.
(02-95 to 04-95)

Saudi Consolidated Electric CO. Dammam, Saudi Arabia
Systems and Controls Engineer/Supervisor
Assignment consisted of the maintenance and instrument engineering modifications on four 650 mw gas fired steam plants. Plant instrumentation consisted of various types transmitters and valves Honeywell, Rosemount, Yokogawa, Fisher, Valtek both smart/conventional. The boiler and turbine controls consisted of the Bailey Net 90 and Mitsubishi. Other responsibilities included the maintenance on two desalination plants.
(04-94 to 12-94)

Florida Power Corp. St. Petersburg, Florida
Instrument Technician/Supervisor
Duties included the implementation of engineering changes and troubleshooting of the control systems and the replacement or calibration of the instrumentation, such as Fisher valves, Rosemount Transmitters, pressure and level switches, damper drives both pneumatic and electrical, Bailey positioners, level and pressure controllers. Maintained the Foxboro I/A DCS.
(10-86 to-04-94)

Education:

Graduated Melbourne High School
Melbourne, Florida

Degree in Electronics, Florida Community College
Jacksonville, Florida

Military Training

Basic Electricity and Electronics Class B ( 02-18-77 )
Interior Communications Electrician Class A ( 08-22-77 )
Miniature Component Repair ( 12-02-77 )
Micro-Miniature Component Repair ( 12-06-77 )

Instrumentation and Controls Courses

Process Measurement Fundamentals ( 01-89 )
Process Controls Fundamentals ( 01-90 )
Microprocessor ( 11-89 )
Microprocessor troubleshooting ( 11-89 )
Foxboro I/A Series Systems Maintenance ( 02-90 )
Foxboro I/A Series Systems One ( 06-92 )
Systematic Troubleshooting ( 01-92 )

Work Related Skills and Experience

Basic computer skills in windows
Proficient in the use of test equipment ( Oscilloscopes, VOM, ETC. )
Experienced with Turbine Supervisory Instrumentation ( Bentley Nevada, GE )
Experienced with DCS systems (Foxboro I/A, Yokogawa, Bailey Infi 90

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1482)

Go to Search Parameters...

Brief Description

Mechanic Field Tech: Mechanical, Hydraulic,Electrical,Pneumatics, Welding

Attorney specializing in Land and Oil/Gas Law

To utilize my broad skills and experience in offshore and onshore oil and gas installation for process control instrumentation and electrical maintenance.

Objective Employment with a company desirous of a dedicated, hard working, creative, team player, offering 25 years of experience in the Instrumentation field.

Resume for employment

The computer skills I have apply primarily to Landmark (Unix, SunSolaris, Oracle) and Kingdom (SMT) seismic workstations. I am proficient with most PC applications as well. My work history is stable and I have good references.

Seeking a position as a driller where my experience, training, loyalty and good work habits will be an asset to your company. I have over 27 years of oilfield experience offshore and on land with expertise in the following: supervision, operations, trouble shooting, safety and derricks.

Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins

26 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Reliability, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment /Maintenance Engineer

Oil Industry Business Builder

journeyman electrician

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Industrial Maintenance Electrician 442A, Industrial Electrician, Instrumentation and Control Technician 447A, Instrument Mechanic, Electronic Technologist, Electrical Maintenance Technician

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

Piping supervisor. on & offshore construction/maintenance

I am currently seeking employment internationally preferably on a rotational basis

To join an organization where management skills and experience can be exercised to provide leadership in the areas of design, construction and plant maintenance utilizing my training and 25 years of experience to improve the firm's long term viability as a successful business concern.

Proficient in managing reciprocating and rotating equipment maintenance, supervising general servicing, overhaul, installation, commissioning and troubleshooting of this equipment, ability to set up and operate CMMS programs

I have over 20 years experience as a Welder/Fitter. The majority of my experience is in the Oil & Gas Industry. I am willing to relocate and/or travel.

25+ years in the pharmaceutical, chemical and petroleum industries as an instrumentation technician. Willing to travel.

I am experience Electrical Instructor who has worked for most of the major Oil and Gas companies. I have experience as both a classroom, On the job trainer and NVQ Assessor. My work experience covers the following areas Middle East, Far East and Africa.

Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

Looking for a Position to futher my skills in Sandblasting and Painting

32 years Oil Industy experience in Drilling Fluids / waste Manging / Cementing / Drilling Engineering / Business Develeopment / Project Management. Degree. experience of Cpld weatehr, HTHO, deep water, H2S wells.

Experienced Instrument and Control Technician, with more than 20-year hands-on work experience. My experience covers working for Petroleum Refineries, Petrochemical facilities and Offshore oil/gas production facilities.

Machinist manual 10plust years exp.

I can offer extensive supervisory experience in the oil and gas industry,

Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa.

For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas

25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections

Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal

ONSHORE-20 Years. Set-up and supervise Mechanical Operations & Maintenance duties. OFFSHORE PLATFORM-4 years. Oil & Gas offshore Platforms Maintenance instruction to Maintenance staff. Identify and control all replacement spares and equipment of all offshore plant and equipment.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

I have been employed in the oil and gas industry for over 20 years, 12 overseas. Supplemented by formal training, my career has enabled me to develop expertise in a wide variety of mechanical, technical, and organizational staff and work management areas.

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field.

I'm a USN Veteran Electrician with a solid background of electronics. I'm a self starter, and I have been working for myself on/off during the last year as a contract labor electrician. At this time I'm working for myself doing electrical jobs for Coastal Drilling in Corpus Christi, Texas.

A Technical personnel willing to relocate and learn and be involved in a new working environment. Can perform PC and LAN troubleshooting, installation, maintenance and configuration.

Senior directional driller

Good work ethic, current job title is foreman. Can read prints, run/route tray, terminate, build panels, troubleshoot, some experience bending tubing etc. Knowledgeable in power, automation, & pneumatics along with a good understanding of both drilling and production operations.

Yard superntendent for an offshore construction firm; additinal responsibilities; key holder, hiring, training, safety and quality control.

Free! A highly motivated professional who excels and thrives on challenging work. Self-managing; results oriented – used to working under pressure, with the ability to prioritise work tasks and meet deadlines. Excellent communication and organisational skills, and leadership qualities.

Safe Operation of Cranes to 300 Tons

Maintenance, troubleshooting, and repairs @ plants, boosters, etc.

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out