Resume - Supervised KBR Power Generation WestSite of LSA Anaconda and recorded preventive...

Misco Jobs

Resume #38571

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To seek a better career, utilizing my experience in electrical, controls and safety for the benefit of my employer.

MAJOR ACCOMPLISHMENTS
* Supervised KBR Power Generation WestSite of LSA Anaconda and recorded preventive maintenances according to ACO and SOP and supported military with over 1000 generators.

* Supervised electrical testing of existing 400 Wye and Delta, 11000 and 33000 VAC systems with personal knowledge of Baghdad Airport Control Tower, power plant and sub-stations 1 through 15 layouts while with IAP World Wide Services.

* Recommended and initiated modification and replacement of equipment such as life boats, fire extinquishers, gas detectors and generator systems that failed to meet acceptable operating standards both on land and offshore applications while at Sola Controls.

* Initiated and suggested plans to motivate workers to achieve work goals and hold safety meetings. (JW Gray Electric, 2002)

* Successfully managed an 8-manned goal achieving team pulling tray cable from MCC rooms to source. (HB Zachry, 2001-2002)

* Attended schoolings and technical programs in maintenance and rebuilding and modifications of reciprocating and turbine equipments in the US Army and at colleges and at Chevron, Shell, Texaco and Conoco.

EDUCATION
2000 Production Safety Course Nichols State University

1997 US Army Ft. Hood, TX

1988-1997 Safety and mechanical courses on M113's, M577's, M60, M151's, Bradley's and various military equipment.

1984 III Corps Honor Graduate in Primary Leadership Development

1976 Mountain Home High, Mountain Home, Arkansas

WORK EXPERIENCE
Mar 2005 to date Kellogg Brown and Root Services, Inc. Balad, Iraq
Power Generation Foreman

Supervises four (4) team leaders with three (3) mechanics in each team for service, repairs, troubleshooting, maintenance, and emergency calls; assist management in formulating department policies and systems and monitor its implementation; perform other tasks that may be required by the LOGCAP contract from time to time.

Dec 2004 to Nabors Drilling International Dhahran, UAE
Feb 2005
Supervisor, Rig Electricians

Supervisor for six (6) rig projects in Saudi Arabia for Pool Arabia, handling 14 electricians building skids for housing drilling personnel, installation of transformers, cable tray, and terminated cable and tested generator package. Supervised fork lift and simultaneous crane operations while moving and setting expat and TCN housing.

Mar 2004 to Lear Siegler Inc., Mosul, Iraq
Nov 2004
Primarily responsible to work for the maintenance of Hummvee's, Hemmets and Model 1076 PLS trailers, MTV and LMTV's, M923's, bulldozers, generators (to include civilian and US Army 3, 15, 30, 60KW) and larger generators; Order parts and complete 2404 and packets for all works performed.

Oct 2003 to IAP World Wide Services Irmo, SC
Mar 2004
Mechanical Tech Manager
Supervised personnel performing maintenance on generators at VVIP and Villa compounds in Baghdad, and worked with Army Prime Power to maintain power to Baghdad Control Tower ; Assist in building, planning, and management of 40 caravans with water, power, and sewer to meet current hygiene standards at the VVIP compound.
Nov 2002 to P2S/SECO Flour Metairie, La
June 2003
Electrical Technician

Install and repair electrical systems, apparatuses and electrical and electronic components of industrial machinery and PLC equipments; Test motor-control devices, switch panels, transformers, generator windings, solenoids and other electrical equipments; Diagnose cause of electrical and mechanical malfunctions and failures of Cat, Onan, and Perkins generator equipments, and perform preventative and corrective maintenances.

Aug 2002 to United Automation W Monroe, La
Oct 2002
Electrician

Plan layouts installed and repaired wirings, electrical fixtures, apparatuses and control equipments; Measure, cut, bend, thread, assemble and install electrical conduits using tools such as hacksaws, pipe threaders and conduit benders; Assemble and test experimental motor-control devices, switch panels, transformers, generator windings, solenoids and other electrical equipments.

Mar 2002 to JW Gray Electric Stafford, TX
Aug 2002
Electrician

Prepare sketches showing location of wirings and equipments based on diagrams and blueprints; Ensure concealed wirings are installed before completion of future walls, ceilings and floorings; Supervise and coordinate activities of personnel engaged in installation, testing, adjusting motors and engines; Was instrumental in directing backhoe operator to dig for 3" secondary power conduit per site prints; Execute daily mechanical checks and service on backhoe.

Dec 2001 to HB Zachry San Antonio, TX
Mar 2002
Journeymen Electrician

Was instrumental in the installation of 2000 feet of 3" and 2" rigid conduit in a day by using the drilling derrick method of lifting pipe and installing with chain grips; Plan layouts, install and repair wirings, electrical fixtures, apparatuses and control equipments and install grounding leads;

Sept 2001 to Arrow Electric San Antonio, TX
Dec 2001
Electrical Foreman

Supervised and coordinated activities of 15 electricians; Inspect completed installations for conformance to design, equipment specifications, safety standards and initiate plans to motivate workers to achieve work goals. Train new batch of electricians for the company.

Aug 2000 to McBride Electric San Antonio, TX
Sept 2001
Electrician

Applied electrical theory and related knowledge to test and modify operational electrical machinery, electrical control equipment and circuitry in industrial and commercial plants and laboratories; Connect control panels to power source; Diagnose cause of electrical and mechanical malfunctions and failures of operational equipments, perform preventative and corrective maintenances; Review work orders and related manuals, blueprints and schematic diagrams to determine tasks to be performed and tools to be needed for installation of machines.

Feb 2000 to Sola Safety and Controls Division Lafayette, La
Aug 2000
Safety Technician / Operator

Tour offshore facilities to inspect fire and safety equipments, machineries and facilities, identify and correct potential hazards to ensure compliance with safety regulations; Fill out inspection reports on condition of valves, pipes, tanks, pumps and alarms for superiors and customers and test wirings circuits, following blueprints and diagrams; Confer with customers and recommend changes or alterations of equipments.

Sept 1998 to C & D Production Inc. Larose, La
Feb 2000
Offshore Field Electrician / Operator

Fly offshore 7/7 to Texaco/Chevron offshore platforms in Gulf of Mexico and provide personalized services; Join tubing and pipes to various refrigerating units and test for gas leaks; Purchase electrical parts and maintain effective inventory controls; Install and repair electrical systems, apparatuses and electrical and electronic components of industrial machineries and equipments and install grounding leads.

Jul 1998 to SECO/Phillips Metairie, La
Sept 1998
Electrical Technician

Install and repair electrical systems, apparatuses and electrical and electronic components of industrial machineries and equipments; Install control and distribution apparatuses such as switches, relays and circuit-breaker panels, fastening them in place with screws and bolts, and high voltage connections on turbine generators and switch gears.

Jul 1991 to Sola Safety and Controls Division Larose, La
Jul 1998
Fire, Safety Technician / Operator

Plan layouts, install and repair wirings, electrical fixtures, apparatuses and control equipments per MMS and USCG regulations; Observe functioning of installed diesel engines, made adjustments, relocations, and replacements; Fabricate and assemble metal solar collectors according to job order specifications using machine shop tools and equipment; Restructure and improve inspections on 100's of offshore platforms to ensure adherence to design specifications.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 1351)

Go to Search Parameters...

Brief Description

Mining engineer with special passion for drill and blast operations but experience of many aspects of contemporary mining/rockworks operations. International experience and excellent language skills.

10 years Experience (Process Instrumentation & control sys. Engineer) at chemical industries (Hazardous area) and water treatment projects-Installation, testing, commissioning, operation, monitoring, modifying & maintenance for new projects-Check & review vendor proposals, doc. & drawings

BS in Computer Science, Certificate in Basic Petrochemical Operator Training, Certificate in HVAC, 608 Universal Technician License, and 609 IMACA Technician License

New Zealand BTech Honours Graduate in Biotechnology

Safety Representative.

Working for about 9 years with multinational construction companies and consultancy firms in large scale international projects is my solid base upon which I became a Professional Civil Engineer. Aware by Quality and Safety Management Systems, Civil Engineering International Codes and standards.

IT / System or Network Administration and General Maintenance on LAN and Internet Security

Having exp. in fabrication, workshop (100tonpower press) components production, fabrication of structures, industrial sheds as per drawing (supervision of the work), greenhouses components designing for dies, manufacturing erection (100% nut, bolt system), confident in any work, since 12 years

To build a career in an organization with opportunities to handle challenging & exciting task.

Several years experience in the electrical and electronic field. Experienced in installing, troubleshooting and repairing electrical and electronic units. Maintained and serviced Telecommunication systems and Data communication equipment.

clean BC Driver's license Class 5 & 6, have operated heavy duty equipment, some welding (no ticket), mechanically inclined

Senior GIS/CAD Technician with over 2 years experience with Environmental Consulting. Trained in the use of ArcGIS, Autodesk, ENVI, and Microsoft Office. Previous work involved: mitigation, delineation, watershed analysis, habitat conservation, hydrologic monitoring, and soil sampling.

Quality engineer

Senior Piping Designer/Construction Engineer - office and field

(Auto CAD Technician / Welder) 2-D Mechanical, 2-D Architectural, 3-D Sectional Drawings of Mechanical Engineering Parts etc.

Experienced in estimation/tendering related to Man-Hrs/Material/Price &Project cost reports

Experienced Windows 2003 engineer. Exchange 2003, Active Directory, Group Policy, DNS, DHCP, BackupExec, Brightstor, Cisco, HP h/w, Viruscan, E-Trust, EPO.

Supervised KBR Power Generation WestSite of LSA Anaconda and recorded preventive maintenances according to ACO and SOP and supported military with over 1000 generators

More than 7 years of experience in material control/inventory management and in SAP MM module .Good knowledge in MS office,ERP softwares and SAP.Very familiar with oilfield equipemnts,their function and spares.

HVAC TECHNICIAN

Skilled and experienced trades assistant. Quick learner and extremely motivated. Looking for more experience and skills in oil and gas.

Geological Engineering Technologist

I have the U.A.E residence and work permit. - I am confident and extremely professional with about 7 years of experience working as a procurement , project engineer and commercial Coordinator in Oil, Gas, Petrochemical, Metal and Mining industries.

Foreman, Surveyor and Team Leader, Civil Construction Supervisor

Journeyman Heavy Duty Mechanic/Technician, Red Seal Certification, Strong leadership, mentoring, advisory skills, can work independently providing high maintenance and repair standards on electronically controlled diesel and hydraulic systems on all types of stationary or moblile equipment.

To focus on the identification of potential problems and propose immediate solutions. To Promote Safety awareness and Zero harm Tolerance. Co-ordination of production and staffing.

More than 12 years in welding inspection job (CSWIP 3.1, ASNT Level II IN RT, PT, UT and MT)

Computer skills (MS OFFICE SUITE,AUTOCAD,STAADPRO,CADS,MULTIFRAME), Codes of practise, H.S.E, B.Sc Civil Engineering

I Hold a BSC in Computer science with international Certifications from Cisco and Microsoft, I have over 4 years hands-on expertise in Information technology / Telecoms dept with Total Nigeria.With Skill in Support for voice and data. Lotus mail and windows administrations and support.

B.Tech Chemical Engineering (Second class Lower division) with Good basic knowledge in Engineering software,Good communication, interpersonal and customer relations skills

Accounting Degree with 8 yrs accounting experience

Self-motivated with the ability to originate and adapt to new ideas

all taype electrical and electronic maintenance

Yokogawa- Centum CS-3000,CS1000 DCS,Triconex(Invensys) – Tricon & Trident PLC (Emergency Shutdown System),HIMA PLC (Emergency Shutdown System),Emerson Process Management -Delta-V DCS,Yokogawa-Prosafe PLC ( Fire & Gas Detection System, Emergency Shutdown System ),ESD,F&G

Diploma in Automobile Engg. Around 5 Years of experienced in preventive maintenance, troubleshooting and breakdown repairs of Mining & Construction & Earthmoving equipments

12 years experience as a fitter. Worked on caterpillar, leyland, detroit, nissan, toyota, clyde and GM diesel engines. Have experience with hydraulics and pneumatics as well as fault finding skills

Well-versed in GIS principles and technologies. Proficient in ArcGIS (ArcMap, ArcToolbox, ArcCatalog, ArcInfo) and extensions (Spatial Analyst, 3D Analyst, ArcScene), ERDAS Imagine, R2V Conversion, MS Office, and PC operations.

Equipment Operator, Skilled Laborer, Heavy Equipment Operator, Construction work, Quick learner, Landscaping, skid steer, excavators, loaders, plow truck driver, plow snow,etc.

I have graduated master degree from the University of Indonesia Jakarta, Faculty of Computer Science, majoring in Information Technology (GPA: 3.05, in scale: 4). I sincerely believe that my knowledge, abilities, creativities, and independent attitude would be a valuable asset to your organization.

Young innovative engineer, searching for a multinational company to explode my skills, and get benefits of it

GPS / Instrument man / Rodman. Perform land surveys including topographic, mortgage, building permits, and subdivisions. Equipment used is Trimble GPS with equipment models TSC2 controller, 5700 base receiver, Trimmark 3 radio transmitter, and 5800 rover receiver. Topcon Total Station using TDS Re

·Developed and supervised plans for the arrangement and neutralization of hazardous materials in accordance with agency regulations

Level 1 Coating Inspector, adept at Word, good writer and public speaker, and able to speak Greek and Spanish.

Senior Geologist with 9 years experience in many categories of geology( oil, mining & water ), graduated at May1999 (Geology-Chemistry), Faculty of Science, Cairo University, then high studies at 2001 (Sedimentology), Faculty of Science, Cairo University-Egypt, and high studies at 2004 ( Geophysics,

Pipe Fitter -Logistics-Safety

I am looking job in Australia, Canada & UK. I have 8 years experience in Administration Department. I can run an organization Individually.

I hold a Bachelor degree in commerce. Beside my sound academic record I have a diploma in business electronics data processing and currently pursuing Masters in Financial Management.

Journeyman electrician, field camp experience, supervisory experience, controls experience, cleared

SAP, Business Analysis, ERP, Project Management tools, Full life cycle implementation, Reporting tools, Documentation, End User Training

Seismic Processing Geophysicist

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out