Resume - I am working as Plant Operator in Refinery & Petrochemical Units since last 08 y...

Misco Jobs

Resume #38856

CONTACT INFORMATION:
View contact information...

EDUCATIONAL QUALIFICATION:
1] Bachelor Of Science [Chemistry] Passed In Year April 1996 From South Gujarat University With 58%.
2] Second Class Boiler Competency Exam Passed In April 2005 From Gujarat University, Ahmedabad.

EMPLOYMENT HISTORY:
1] Reliance Industries Limited [Petroleum Division] Jamnagar Working As
Plant Operator Since 28.12.98 And Continue
2] Guajrat Refinery (A Division Of Indian Oil Corporation Ltd) Workes As
Attendant Operator From 28.04.97 To 27.10.98
3] Sona Plastics Work As Chemist From 04.07.96 to 10.04.97

PROJECT (COMMISSIONING) EXPERIENCE:
I was involved in successful pre-commissioning/commissioning & Startup of
Light Naphtha Unionfiner (Cap.: 29000 BPSD) & Merox units which include Sat LPG Merox (Cap.: 19000 BPSD), Unsat LPG Merox (Cap.:60000 BPSD), Light Kerosene Merox (Cap.: 35000 BPSD) & Gasoline Merox (30000 BPSD).
During this period I was mainly involved in

* Review of PFD, P& ID, and equipment datasheet.
* Going through plant specific operating manual and standard operating procedure manual
* Loop punch list preparation & dilution of punch list.
* Precommissioning & commissioning activities like hydrotesting, flushing, leak test, drying, final box up purging, acid pickling etc.
* Checking Fire and Gas Detection System and also fire water deluge system on various pumps and fin fans
* Plant start up activities like hydrocarbon inventory, oil flushing, cold circulation, long circulation etc.
* Inter lock loop checking
* Plant normalization, optimization & demo run (performance run)
* Plant normal shutdown & emergency shutdown.

PRESENT WORK PROFILE:

I am working as a Field Operator in

1] UOP designed Light Naphtha Hydotreater Unit having capacity 29000 BPSD
2] LINDE designed Hydrogen Plants [two train] having capacity 181 MTD each
3] Hydrogen Compression Unit which include three numbers of Reciprocating compressors
4] Refinery Fuel Gas Distribution Unit which is designed to collect the uncondensed off gases from various units of Refinery and distribute them as fuel and pilot gas to fired heaters in different units.

MY JOB AND RESPONSIBILITIES IN STEADY PLANT ARE AS FOLLOWS
- Continuous monitoring of throughput
- Continuous vigilant in the field by taking rounds at regularly interval.
- Chemical injection rate controlling in HP BFW & Condesate stripper.
- Note down field readings for cross check with DCS. (I.e. LT/FT/PT etc.)
- Pump & Compressor change over / isolation for maintenance.
- Monitoring the smooth and safe operation of rotating equipment like pump, compressor fin-fan cooler, and ID/FD fan of heater, etc.
- Lighting of burners using BMS, Burners change over, Taking Tube Skin Temperature
- Various Field Tests for assessing plant performance like weathering / lead acetate test for LPG, H2s check with dragger tubes, doctor test, taking closed and open loop samples for laboratory testing.
- Checking of firebox and burner flame pattern.
- Ensuring all standby pumps are always in healthy and warm up condition.
- Maintain the record for the future/past shut down job.
- Ensuring strict compliance with safety procedure, work permit procedure.
- Check lube oil/ seal system and oil level in reservoir in RFG compressor.
- Following proper housekeeping to ensure clean and safe work area.
- British Safety Council [BSC] checklists fill up periodically. & Safety Audit checking. Other job instructed by shift incharge and panel operator.
- Punch points list out & rectified as per P& ID, other drawings.

I have an experience of start up and normal shutdown of the unit successfully. I have also tackled emergencies successfully several times.

VARIOUS EUIPMENT HANDLED INCLUDE:
* Two stage Double acting Reciprocating compressors [Make: M/S Thomssen International BV, Nehterland] – 3 nos. of 5.3 MW each having capacity of 185,000 Nm3/hr for pure H2 supply to refinery.
* Single stage double acting Reciprocating compressors [Make: M/S Thomssen International BV, Netherland]-2 nos. of 1.3 MW each having capacity of 50800 NM3/hr at gas mol wt. of 5.01.
* Multistage centrifugal pump of 366KW rating [Make: Ingersoll Dresserrand]
* Diaphragm pumps of Capacities ranging from 0.4LPH to 1360LPH.
* Liquid full absorbers & Extractors.
* Single casing two stage Centrifugal Compressor for RFG [Make: Demag Delaval] of 3.5 MW having capacity of 22 TPH of RFG.
* Top Fired Balanced Draft Reformer [Make: M/S Selas Fluid Processing Corp. USA] with 288 tubes & 84 burners. Heat duty of reformer is 195 MMKcal/hr.
* Process Gas Boilers & Steam Generator [Make: M/S Sruthers, USA] both combine capacity to produce HP Steam to tune of 130 T/Hr @ 44.0 kg/cm2 pressure & 392 deg.cent. temperature.
* Pressure Swing Adsorption System. The flow rate through this system is 1,20,000 NM3/hr. of Reformate gas.
* Flue Gas Blower [ID Fan] Cap.: 260000 kg/hr, Combustion Air Blower [FD Fan] Cap.: 19400kg/hr, [Make: Howden]

TRANING PROGRAMM INCLUDES
* Undergone various training modules designed by Reliance, Jamnagar covering all the Process Details/ Operational Training.
* Undergone FIRE & SAFETY and FIRST AID training imparted by Health Safety and Fire Dept. in Reliance Industries Ltd. at Jamnagar.
* Undergone Vocational Training for 06 months at Advanced Training Institute, Sion, Mumbai
* I had also taken training of ISO 9001-2000, ISO 14000-1996 and OSHAS 18001-1999.

STRENGTH
* Can handled field Operation independently.
* Readiness to learn new technology.
* Highly adaptable to new working environment.

EMERGENCY HANDLED IN FOLLOWING CASES
1. Handled Emergency which was occurred due to Earthquake on 26 Jan 2001
2. Due to CPP tripping as total power failure.
3. Heavy HP STEAM leakage.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1351)

Go to Search Parameters...

Brief Description

multi skilled

Equipment Maintenance; Mechanical Experience; Fork-lift Certified; CDL

Electrician 309A

6G Coded Pipe Welder T.I.G.

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Construction/Mechanical Project Manager and Engineer with over 15 years of experience including recent projects in the construction industry.

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

CAD Engineer

I am a trained and experienced Steward with excellent Floorhand training. Security Clearance Canadian Government Enhanced Security Clearance *willing and able to relocate *Marine Medical completed March 3 2004

I am working as Plant Operator in Refinery & Petrochemical Units since last 08 years Reliance Industries Ltd. [Petroleum Division, 650 KBPSD crude processing capacity]

• Qualified Metallurgical & Materials Engineer with 12 years of Proven Capabilities in Research & Development, this includes, Product Development, Application Development, Process Improvement, Energy Conservation, Quality Improvement, Materials Testing, Characterization & Customer Complaint Investi

20 Years Construction Experience

DIPLOMA IN BUSINESS ENGLISH AND DIPLOMA IN PERSONEL MNGT.+AUTO CAD

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Deck officer with five years of work experience on board of AHTS’s, OSV’s, Container, Con-Ro and other vessels as Cadet/OS, 3rd Mate, 2nd Mate, Chief mate and Relief Captain.

I am a journeyman plumber/gasfitter with 22 years experience, with 5 years experience as a facilities maintenance planner. I am looking for variety in my field of experience.

Rigging & Heavy Lifting, Computer,Autocad.Microsoft Office Spread Sheets.

WHIMIS H2S Driver licence 5 years Canadian experience as a General Lebor

Trained in electrical and electronics (telecommunications option)

Fully qualified Diesel Mechanic. NVQ Level 3 in Heavy & Light Commercial Vehicles. HGV C+E Licence. ADR Licence. 13 years experience with Mercedes Benz. Numerous Mercedes Benz Certificates held.

Total of 7 years Experience. I am familiar with all kinds of fire fighting systems and fire detection system and safety equipments in offshore.

Develop, implement, supervised and monitor continual safety and training programs. Work successfully with client representatives to manage compliance with Loss prevention, Environmental, Project Management and client requirements satisfactorily.

I am seeking a position in your esteemed organization, Hawk Petroleum Inc. for Sales, Marketing, Trading of Petroleum Products in South East Asia (Indi)

Maintenance in PLC,DRIVES,Instrumentation Field

Pipefitter/Welder with over 10 years experience

Lead Instrumentation Technician

Extensive engineering career featuring over 17 year’s experience. Proven ability to deliver innovative solutions that serve corporate objects, Project Planning, Project Engineering (Instrumentation), Implementation, Construction, Commissioning, startup and process monitoring Petroleum/O&G projects.

I am a qualified Heavy Duty Vehicles driver, Crane Operator as well as a mechanic. I have a vast eperience of 21 years in managing heavy equipments including cranes, Trucks, Trawlers and Bull-Dozers. I had been working working as a workshop incharge in UAE Armed Forces.

experience for 20yrs in electronic instrumentation, telecommunication , fire and gas, and electronics

Business Development, Marketing, General Management - Project and Product ( Chemical Engineer + PG Diplima in Export Marketing)

5 years of experience as a instrument technician in oil and gas process plant

Offshore mechanical technician/fitter

Instrument Technician / Qc

20+ yrs experience surface and DTH

Mechanic - desire employment opportunities.

Fully trained Mechanic in Petrol and Diesel engine repairs in all aspects of diagnositc and repair procedures. Working on all types of Heavy Equipment and Plant Equipment over the years developing myself in all areas of the service and maintenance section.

Technical director, mining engineering

Free! Drilling Supervisor - 17 years Drilling Experience - 7 years International Experience - Safe and Efficient

-------------------------------------------

Power generation supervisor/Mechanic/ HVAC Mechanic.

I have over five years of oilfield experience. I am a highly motivated person who is able to contribute as a team player and also work independently under pressure using my own initiative. I possess excellent communication, listening, and presentation skills .I am also a strong leader and organizer.

i have 30 years experience in construction,mechanical as a business owner,supervisor,etc,

Skilled heavy machine operator. Skilled pipeline worker. Travel experience.

EXPERIENCED HEALTH/MEDICAL PHYSICIST-ENGINEER-SCIENTIST

Aviation expert with 21 years in the maintenace arena. Track record of increasing productivity, improving quality while reducing cost and meeting customer needs. Skilled in scheduling, supervising &evaluating over 50 personnel. Successful in developing & executing operational policies and procedures

Oil market analysis, oil pricing mechanism/simulation and modelling, forecasting, market research, oil industry management, downstream oil industry facilities monitoring, fuel quality monitoring and evaluation, project management, project proposal preparation, oil and gas project evaluation,

Professional in Quality and HSE

A Highly Skilled and Motivated Sr. Lead Oil & Gas Production Tech.

Interested in Entry level Position in Oil Industry

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out