Resume - I’m extremely interested in obtaining a post either as Geophysicist / Geologist ...

Misco Jobs

Resume #39783

CONTACT INFORMATION:
View contact information...

EDUCATION
2001 - 2004 University Malaysia Sabah Kota Kinabalu
Bachelor of Science in Geology
CGPA 3.20 over 4.00
2003 Thesis Title: Facies Analysis of Crocker Formation along Ranau – Kota Belud Road (4-8km), Sabah

EMPLOYMENT HISTORY
Dec 2005 - Present Paradigm Geophysical Sdn Bhd Contract
Processing Geophysicist
- Involved in production and QC for Pre-STM and Pre-SDM processing (2D/3D marine and land seismic data)
- Velocity and residual move out picking
- Tape loading, reformatting and trace editing
- Running jobs with Disco, copy tapes, tape dumping (TUTL) and extract data from tape into local disk (TAR)

Feb 2005 – Nov 2005 Sapura Crest Petroleum Bhd Permanent
Interpretation Geophysicist
- Interpretation on analogue and digital geophysical data (2D Seismic)
- Interpretations are based on Echo Sounder, Side Scan Sonar, Sub Bottom Profiler (Pinger/Boomer), AGC and RAP raw data
- Mapping and produced Bathymetry, Seabed Features, Shallow and Intermediate Profiles, Shallow or/and Intermediate anomlies, Channels and Isopach charts for each project
-Correlate soil boring or completion well reports (provided by clients) during interpret the shallow and intermediate's profile
- Reporting: Prepare draft and final report with geotechnical descriptions for the survey. Surveys include pre-lay, post-lay pipelines, platform pre-installation, site clearance survey and seafloor sediment with hydrocarbon potential analysis (Marine Hazard Site Survey)
- Discussion with clients: Proposed platform's location will be relocate if hazard to the installation
(The works mentioned above are mostly involved South East Asia Region such as Offshore Terengganu, Sabah, Sarawak, Brunei, Thailand and Vietnam)

Aug 2004 – Jan 2005 Caltex Oil Malaysia Limited Contract
Price Analyst
- Setup margin for products in Commercial and Industrial (C&I) based on daily market close, from Singapore
- Products include Kerosene (leaded and unleaded), Diesel and Fuel Oil
- Updating the product cost based on Cost Build Up (CBU)
- Deal with C&I Business Consultant from different divisions (constructions, transportations, industrials and unbranded) about the latest product cost
- Transfer all the latest pricing, products details, client's data and relevant information into SAP system
- Keep track the daily product supply chain and deal with finance and logistic department
- Make sure no late payment from customers and products delivered on time with the latest updated prices

Mac 2005 – Jul 2004 ENSR Corp Sdn Bhd Intern
Intern: Environmental Geologist
Environmental Site Assessment (ESA)
- Indentification of relevant regulations pertaining to the site
- Existing environmental management practices and site conditions assessment
- Review of historical land use and database search
- Review of permit records and compliance history of site
- Evaluation of any potential environmental liabilities associated with the existing site due to past usage of the site or operations at adjacent facilities
- Interview with site personel, relevant regulators and authorities
- Site reconnaissance
- Identification of areas of potential concerns (APCs) that may need further detailed assessment and sampling
Hazardous Waste Management and Remediation
- Advancement of boreholes and installation of groundwater monitoring wells at APCs demarcated during the ESA
- Soil and groundwater samples collection for laboratory analysis
- Assessment of potential subsurface and groundwater contamination due to past operations at the site

COMPUTER PROFICIENCY OPERATING SYSTEM: LINUS, UNIX, Window
Software Handled: Focus, Geodepth (for seismic data processing), MS office, Auto CAD, Surfer 32, SAP, Coral Draw and Coda
Platform Mainframe PC's: SGI and Sun IBM compatible systems

LANGUAGES: English, Malay, Mandarin, Cantonese, Teochew

EXTRACURRICULAR ACTIVITIES
University Malaysia Sabah
- Secretary of Geology Club; Photographer; Ad-hoc Vice President
- Responsibility of meeting reports, memos and paper works; a main criterion is the fulfillment of club's goal – 1st Edition Geology magazine entitles "GEOLINK"; being a vice president for "Team Building" camp, over viewing and guiding.

S.M.K Maxwell, Kuala Lumpur
- Athlete of 200m, 4X400m; Publicity of Indoor Game; Publicity of Buddhist Society; Committee Members of Club Photography; Member of Six Form council and Club Science and Mathematic
- Experiences gained: Communication skills, team spirit, people management and public speaking, tactful skill in handling club reputation to attract more students to join

S.M.K Raja Ali, Kuala Lumpur
- Vice Treasurer Club Moral, Vice secretary Club Science and Mathematic, Operation Director of Youth Enterprise1, Choral Speaking as school team, Committee members Club Ping Pong
- Experiences gained: Leadership and team spirit

1. Nominated and awarded "The Best Annual Report" and "Creative Product" within Wilayah Persekutuan.

HOBBIES Diving, Traveling and Reading

VOLUNTEER EXPERIENCE:
Committee members of Buddhist Tzu Chi Merit Society Malaysia
- Visiting and helping in old folk homes, orphanage homes, handicap center etc
- Monthly visit to Sabah rural villages to serve and teach primitives of their daily life morality
- Involved in secretariat roles for 3D2N and 2D1N Free Clinic for Sabah's primitives

INTERPERSONAL SKILLS
I'm a responsible, dynamic, diligent, self - motivated and a result orientated person. Based on past few years' roles and responsibilities that I'd carried out, proved that I'd delivered good results and met projects' objective within deadline. I am willing to take challenge and explore new experience whenever there is an opportunity. I am also a good team player who is able to work with.

Refees
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1474)

Go to Search Parameters...

Brief Description

I have 3 years mechanical school and after I stay for 4 years as a motordriver on a big fishing boat and 3 years in a production fabrik as mechanich

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Machinist- licenced

COATING INSPECTOR CV

Instrument Supervisor

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objective To have the opportunity to contribute to the efficiency and productivity of a prospective employer.

OBJECTIVE Seeking entry level position in the off shore oil and gas industry. Jump start a new career with your company while becoming a mechanical engineer through on the job experience, schooling and hard work.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Turbine tech.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Electrician who posseses a wide variety of electrical knowledge

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Experienced Floorhand/Roughneck

I wish to work in a challanging environment of the oil industry

Attorney and Landman with excellent tract record of acquiring Oil and Gas Leases. Over 10 years title experience, with specialized training in probate and non-probate transfers of property interests; including trusts and all matters relating to the administration of estates. Diversified experience

I’m extremely interested in obtaining a post either as Geophysicist / Geologist / Petrophysicist or any relevant position that fit my education back ground. I have outlined some working experiences and developed talent in geology (Geocience) about myself in the Resume attached for consideration

• A Competent mechanical technician skilled in all aspects of plant repair, maintenance as well as installation. Takes pride in working to the highest standards while meeting allotted deadlines and willing to work after hours to ensure job completion. I have an excellent attitude towards the safety

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Senior Mechanical Draughtsman(MEP)

Asset Management Application Support

To Become employed as a Instrument Tech, Instrument Designer, or Process Operator

I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.

Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.

Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.

sales, marketing, business development general management

Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)

Many years of experience, very detailed orientated.

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

I&C Technician with geothermal experience

Welder

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

Worked service rigs for 2.5 years

Instrument technician

Versatile, knowledgeable, exploration geologist

An experienced multi-disciplined electrical engineer with 28 years experience in the oil and gas(onshore and offshore), petrochemical, construction industry with functional expertise in project management, materials specification and procurement, sales distribution, marketing and business developm

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out