Resume - Bsc Chemistry Garduate, total 17 yrs progressive experience in petroleum Industr...

Misco Jobs

Resume #40322

CONTACT INFORMATION:
View contact information...

APPLICATION FOR THE POST OF: "Lab Technician / Operator"
Petroleum Inspector – (Chemist Surveyor)

I understood that there are some vacancies for the above mentioned post to be filled at your esteemed organization.

I found myself eligible for for any suiatable post mentioned above,hence I undersigned hereby furnish my CV for your kind consideration. Waiting for positive reply at earliest.

I am working in this petroleum field since 1985 and I have got 17 years actual working experience in different petroleum industries in different areas like Quality Control, Operations, Production & Administrations. The details are given in the bio data, which is enclosed for your perusal.

Progressive experience in petroleum & lubricating plants as a 'Technician' for both Quality Control & Plant Operations hence wishing to use this practical & theorical knowledge wherever needed in abovesaid areas in any petroleum industries.

Being Science Graduate (Bsc.-Chemistry) from Bombay University, Successfully completed 3 years accredation course in " Laboratoty Technology " in Bharat Petroleum Corp. Ltd. In their 12 MMTPA, a grassroot refinery at Mumbai.
Thoroughly acquainted & fully conversant with almost all crude & petroleum products tests as per ASTM/IP/BS/API approved test methods.

I can setup run & standerdize an independent laboratory for Crude & Pet.Products as per ISO-9002 with all lab equipments standardization & calibration.

At present I am working with INTERTEK CALEB BRETT, Kuwait since December 1997 as a Petroleum Inspector (Chemist-Inspector).

I shall be happy to provide additional information should you so require.
I assure you sir that I shall try my level best to satisfy all my superiors by my regularity, sincerity and hard work.
I will also prefer to join u as Chemist-Surveyor / Guager @ Tank Farm

I am presently working in one British International Company as a permanant employee, engagged in Marine Inspection & Petroleum Survey, everyday visiting all the three refineries Mina Al Ahmadi, Shuaiba, Mina Abdullla,their Export Jetties including KOC Export Operations and Texaco port at Ras Al-Zour, Wafra Joint Operations & Shuaikh Port.

Basically I am from Quality Control, last 18 - 19 years in
Petroleum Field worked as Lab Technician, Chemist-Supervisor,Operator and now last 8 Years in Marine Inspection as a Senior Chemist-Surveyor / Independent PetroleumInspector.Worked at Sharjah (UAE) and Qatar in same Organoization.as Chemist / Surveyor.

Presently I am drawing around 550 KD (1,900 US $) salary, all relevent documents are already attached, with 4 months on and 1 month off Schedule with free air ticket, Leave salary, Car and free Accomodation.

Looking for change, All concerned documents related to qualifications, Experience & present status are attached, i.e. Salary certificate, Contract Shoon paper, civil Id,Driving liecence, special driving liecence for vanatt-pick-up car.

With current business I am visiting all three refineries Mina AlAhmadi, Shuaiba, Mina Abdulla, KOC Export operations,Texaco Terminal.at Ras Al Zour port & Wafra Joint Operations.With regular business working as Petroleum Inspector at all Kuwait Refineries & Export Terminal, I am also running full independent Lab for full Crude Oil Analysis.

Regularly visiting their Laboratories, Control rooms,Export Documentation and Export Jetty Last 9 Years driving with special yellow liecence of Pick-up also.Can talk speak write excellent English and Fair Arabic.I wouldlike to join as Field Operator / Marine Petroleum Inspector – Surveyor / Chemist in refinery as well,preferably interested in Rotation or Scheduled jobs on Rigs or Offshore.

Current Salary: 1,900 US $ / Month, Expected salary: Around 3,000 US $
Availability: Within 40 Days after selection & finalisation of joining with you.

I am looking forward to favorable reply at earliest.

CURRICULUM VITAE

POST APPLIED FOR: Production Chemist

EDUCATIONAL QUALIFICATION
Sr. Exam passed Year of University Main Percentage
No. Passing Board Subjects of Marks i) Bsc. - Chemistry Dec.1988 BOMBAY Chemistry, Drugs, Dyes First Class ii) Diploma. in Lab Tech. October NCTVT Trade Theory, Work shop 78.92 %
1988 Science & Calculations
Engineering Drawings iii) HSC – XIIth March PUNE Physics, Chemistry, 54.17 %
Science (Technical) 1985 Maths, Technical iv) SSC (Technical) March PUNE Physics, Chemistry, 70.86 %
1983 Maths, Technical v) Primary Education 1977-1982 BOMBAY Physics,Chemistry,Maths 1st Class

WORK EXPERIENCE:
Sr. Period Organization Designation
No. From To

1 Sept. 1985 Sept. 1988 Bharat Petroleum Corp.Ltd. B'Bay Lab Technician
2 Octo. 1988 July 1990 Modern Oil Industries,B'bay Chemist-Cum-Supervisor
3 July 1990 April 1991 Unique Oils India Ltd, Bombay Jr. Chemist
4 April 1991 Mar.1997 Nandan Petrochem Ltd, B'Bay Lab-Incharge
5 Mar. 1997 Dec. 1997 Intertek-Caleb Brett, UAE (Sharjah) Lab Technician

6 Dec. 1997 - Continued Intertek-Caleb Brett, Kuwait Petroleum.Inspector

HIGHEST EDUCATIONAL ATTAINMENTS: Diploma in "Laboratory Technology"

LANGUAGES KNOWN: Good in English (Speak read write), Fair in Arabic (Speak)

DRIVING LICENSE: Holder of Kuwaiti Driving License valid until 29th Nov. 2008.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1485)

Go to Search Parameters...

Brief Description

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

DUTIES: Overseas experience in East Africa -Mozambique and various remote locations in Australia on OD&E Double ,Tripple and Work Rigs (Ideco H-725,Cardwell KB 700,Kremco K-600,Ideco 1200ED-SCR,National 610E-SCR,Franks Cabot 300) encompasing all standard and preventative mechanical maintenance on al

Geologist, 17 years experience with major Oil Company in various international settings (Europe, Asia, Middle East and Africa) both as development- and exploration geologist. Analytical and flexible. Swiss national.

I have been doing Sandblasting/Painting for 18 yrs. Over the years I have become more and more skilled. I have used just about every industrial paint there is (for example) zinc, red oxides, high builds, 890, urithane, epoxies, and etc.... I have knowledge with airless

Electrical technician:Plus 28 years of experience at drilling rigs. Electric & electronic maintenance at many kind of land rigs,with "IPS", "Ross Hill"& "GE" SCR's Drive systems,Varco TDS4 & TDS11SA top-drive, Kato generators,GE,Toshiba,Reliance DC motors,etc.English,Spanish Italian and Portuguese l

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using Monte Carlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

TIG, MIG SMAW, duel shield, drawing, ASTM, ASME codes, MIL 256-7, copper-nickel, plasma cutting

Six years in a medical lab an nine years in a petrochemical lab

Qualified Diesel Mechanic

I am an Independent Landman looking for employment in the Oil & Gas Industry. I have approximately 10 years experience in Mineral Title Search and negotiating leases, Due Diligence and Curative of Title among other aspects of this business.

Sr. Petroleum Geologist, 27 years experience, production & exploration expertise.

Highly knowledgeable in the principles, application, installation, start-up and commissioning, troubleshooting, repair, and calibration of Process Instrumentation and Analyzer Systems.

Graduate Chemical engineer with experience in process control and instrumentation in Petroleum, Nuclear and Power industries. Worked on DMC and SPC advanced control strategies. Computer software skills.

Oil and Gas driller, previous owner of water well drilling company

Electrical technician, Industrial Technician, Instrument Technician, HIgh Voltage Terminator & splicer

painting and insulation supervisor/manager

I have about 15 yesr exsperience in the gas industry and 5 years in the oil field industry.I am currently a oil field gas inspector, and I also was a gas inspector for Public Safety New Brunswick

Diploma in Mechanical Engineering. With 1st class Technical

Positions desired: Plant Services Supervisor, Platform Deck Foreman, Mechanical Supervisor

More than 14 years of actual and hands-on work experience in Electrical, Instrumentation and Control Systems in Petrochemical Plant and Oil & Gas Industries (offshore & onshore) in the field of Inspection, Field Engineering, Construction and Offshore Hook-Up & Commissioning.

Directional Driller II

QA/QC nspector i reviewed and documented all x-rays NDT/NDE inspection UT, PT, VT, M.U.T., all calibration witness all production and documented any repaires and recived all information to reopt for the customer and company every day.

Laboratory Chemist, BSc Honours Degree Chemistry,

Project Management and Processes; PRINCE2 Methodology and Processes; Microsoft Project; Microsoft SharePoint Technologies; Design and Architecture; Migration Projects (2003 to 2007); Branding and Customization (Masterpage); Site and Lists Definitions

Have worked and travelled all over the Pacific region, NZ and Australia. I have interacted and worked with a wide diversity of cultures. I am a very hard worker, I learn new skills quickly and am able to implement them accordingly. I wish to continue utilizing my skills as a Diesel Fitter,

CNC machinist, edm die sinker, wirecut operator

Canadian ticketed machinist and millwrite

Welder or tube welder . blue print . machine operator.. etc..

Offshore mechanic work any shift hyd.and some elect.

TOTAL EXPERIENCE MAIN DISCIPLINE : Above 10 Years of professional experience in Piping (Including overseas).On PDMS 7 Years. EDUCATIONAL BACKROUND 1997-1998 : Diploma in Mechanical Engineering. 1993-1994 : Secondary School Certificate. CERTIFICATES 1997-1998 : Diploma in CADD Graphics. (Autodesk CA

I have more than 9 year experience in Installations,Commissioning ,maintenance, trouble shooting of all Cathodic Protection Systems in Offshore-Onshore , Pipe Line ,Oil and Gas Industries, Refineries, Petrochemical Plants,MarineJettys. And excelent Experience in DCVG (2200Km),CIP(1600Km) Surveys .

Free! I am a management professional with 28+ years of extensive experience in the O & G industry. I’ve supervised under balance drilling operations, directional drilling and vertical well applications. I’m well versed with latest drilling techniques, parameters, policies and procedures.

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Supervisor with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills, can drive change and motivate individuals to enhance company performa

My skills include, but are not limited to diesel engine rebuilding,hydraulic equipment repair and modification, troubleshooting and repair. Drilling equipment, cranes, forklifts and are some I have experience with. Mechanical equipment includes Cat engines, Drawworks, Mud Pumps, TDS9S, TDS11S.

Hardworking and dependable mechanic

I have 13 years experience in the oil and gas industry in Alberta, Canada, drilling natural gas with Champion Drilling. For the past 6 years I have been a driller, supervising a 5 man rig crew. I am loyal and extremely hardworking.

Senoir Fabrication Supervisor for piping on Operation Department from Gulf Specialized Mechanical & Engineering Service Co. L.L.C.For this moment of my job I am started work to checked iso.drawings on conformity with P&ID and notify all descrepancy and inform Field Eng.Department

Maintain a safe workplace. Effectively resolve problems. Expedite the achievement of company projects (procedures & specifications). Ability to think critically as situations develop & change. H2S/HUET/firefighting offshore/certified crane licenses. CPR. Current passport

I have EIGHT (08) YEARS EXPERIENCE: In oil/gas Drilling Company (ENTP), and DALMA ENERGY Algeria as Rig Chief Electrician, in Algeria Field.

* A Petroleum Geoscientist with strong IT background having 10+ years full cycle experience of exploration & production industry with multinationals such as Eni, CGG and Lasmo Oil.

International Logistics Business Executive - Trilingual

Wellsite supervisor for 5+ years with 10+ years prior service rig experience

crane inspector, technician, project manager, special projects coordinator

To apply my skills and training as a Heavy Duty Mechanic. I am a forth period apprentice and have experience with the repair and servicing of hydraulics, gaseous compression systems. And fluid pumping systems, coil tubing units, diesel engine repairs, and tractor/trailer repairs.

+12y of experience in the oil industry, especially onshore& offshore oil drilling service which has worked in the Senior Electrical engineer in more than two company to the position of Assistant Director of maintenance

Planner/Coordinator

Seismic Interpreter(M.Sc. Degree) with extensive experience in exploration with carbonates and basalts. Involved in planning 2D/3D surveys, wells, mapping seismic data, integrating different data sets to derive a sound geological model and technical evaluation of new acreages for bidding.

Title research, Mineral Ownership reports, Limited title abstracting, Lease negotiation, Run sheet, Pre-lease clearance, Draft clearance, Due diligence, Land damage negotiation and settlement, Extensive curative documentation preparation

Bsc Chemistry Garduate, total 17 yrs progressive experience in petroleum Industries as Lab Technician, Chemist, Operator. Last 9 years working as a Marine Surveyor (Petroleum Inspector) at Kuwait. Can Run & set independent Lab for Petroleum Products. Liecenced driver with ISO Quality system knowhow

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out