Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #42835 next resume »»
CONTACT INFORMATION:
View contact information...

Sub: Application for the post as suitable

The Human Resources Manager

Respected Sir
With reference to the above I am herewith submitting my application for the post
as suitable for your perusal and consideration.
As regards my qualification and experience, I am a technical diploma holder from
Jamshedpur technical institute – India, and having completed one year special training Course in Boiler operation, computer literate, posses safe work permit course,Safety courses, and having more than 20 yrs experience in oil and gas field,
Power plant, pumping station, electrical busbars operation,
PCP and ESP wells, main gathering station, shipping of crude, steam
And gas turbines, gas compressor, boilers and other auxiliary
Worked with GNPOC-SUDAN, WAFRA OIL FIELD, KUWAIT
SWCC/ SAUDI ARABIA, ALKHOMS POWER STATION/LIBYA.
And TISCO LTD – India
I am an energetic of 46 Years old and maintained good physique and sound knowledge to carryout field production operation independently in on-shore (desert) and off-shore (platform) Oil and Gas Fields and Refineries under extreme climatic conditions.
I have given the details of my experience in the attached CV
In the light of the above I request you to favorably consider my application by offering AS SUITABLE JOB in your concern and I will discharge my duties to the entire satisfaction of my superiors.

CV


ACADEMIC
Senior Secondary with Science
(BSE Board In 1976)

Technical
Completed 3 Years Diploma From
Jamshedpur Technical Institute

One Year Special Training On Boiler Operation.

Professional
Basic Programming In Computer From
Dps Eatern Ltd Jamshedpur.

OTHER COURSE
Safe work permit
HSE (health safety and environment)
SCBA rescue (gas field Kuwait)
H2s awareness
Fire fighting
Safety & first aid
Defensive driving

EXPERIENCES
1. Presently working as a DCS / control room operator in toma south field (FPF) of
Greater nile petroleum operating company since 1999 (7 years) in Sudan.

Responsibility - To operate and observe all parameter of wells like REDA &
Daiqing ESP wells, monitoring of chemical injections like
PPD, Demulsifier, Reverse demulsifier, gas eliminator.
Operating FPF through DCS, 0peration of free water knock out
Vessels, test separator, micro motion meter, well testing,
Operation of crude transfer pumps, air compressors, produced
Water system, skim oil system, diesel generator, chemical pumps etc
Collection and checking of well head sample and making centrifuge
Test for water cut, instruction to field operator for hourly reading
Of all operational equipments, chemical filling, chemical
Consumption and calibration as per laboratory desired inj rate.
Monitoring of BS&water cut through DCS and lab test.
Pig launcher and receiving operation in 20 inches and 8 inches line
Plan and emerg. shut down, restarting and running plant in safe and
Systematic manner as per operational demand
Remained involved in commissioning job while start up of new wells and facility.

OPERATION OF PUMPING STATION
This facility is a big facility connected trough all other fpf discharge
System on 20 inches pipeline and has 4 booster pumps.
Operation of booster pumps through 20 inches line, pig launching
And receiving through main and bypass line
Controlling of pressure control valve on manual mode during abnormal
Situation or power trips, monitoring of lubrication system, heat trace
System, inlet filters and other instrument on PLC panel.
Monitoring of vibration and temperature of motors & auxiliaries.
Flow rate of pump station - 1600 m3 0r 10062 bbls / hour.
Capacity of each booster pump = 750 m3 /hour.

ELECTRICAL OPERATION
During any power trips or power fluctuation am responsible to operate
6.6 kv / 400 volts busbars / breakers, also to observe line to line volts
Ams loads, reactive power etc.
During total shut down to operate diesel generators and feeding
Emergency power supply to mcc and UPS (120V / 240V / 24V).
Synchronization of bus bars after power restoration, making tie breaker
Operation during during single feeder power supply.
Normal checks of relays, supervision relay, 86 lockout relay, indication
Lamps, led, fpf flood lighting system, indoor lighting, emergency light,
Supplies to heater on vessels, drinking water pumps, UPS batteries etc.

REPORTS
Preparation of daily production report, well test report, pond oil report.
Pump station report, diesel /power consumption report, morning and
Evening highlight reports etc.
Mainting files on computer and hard copies in files of plant activity
Also ISO 14001 files.
Submiting report to production supervisor and superintendent.

OTHER ACTIVITY
A Issue work permits (cold/hot/lift/confined space) to contractors after a
Formal discussion and evaluation on site / equipment.
Observation of progress of job and reporting to supervisor.
B Issue of work permits to maintenance team for any corrective or
Preventive maintenance, instruction to field operators for observation.
C Maintain clean environment in/ around facility with assistance of casual
Workers and field operators.
Dumping of garbage, oily rags, waste materials, sanitary waste water
Onto related bio-degradable and non bio-degradable pits.
Our Facility Has Been Awarded ISO 14001 in the yr -2004
D conducting of fire fighting drill and safety meeting.

2. worked as a control room operator in wafra oil field KUWAIT
During year 1997 -1998 with Westinghouse electric ltd.
(Main company – Saudi arabian Texaco & KOC)

Responsibility
DCS Operating – Westinghouse wdpf system.
Remained responsible to operate Gas Turbines, Turbo
Generators, air compressors, coolers, heat exchanger,
(4x 40 mw generators on normal load) with 60 hz generators.
GAS Compressore (dresser rand canada made).
Operation of carter pillar generator and starting motors during
Black start, synchronization of generator to respective bus bars
Of 13.8 kv, switching transformers and feeders for oil field pumps
And auxiliary, start up and shut down (normal & emergency) of
GAS turbines and generatos.
Controlling and matching between demand load and generation load
By auto and manual excitation system.
Operation of Turbines on isochronous mode and droop mode.
Observation of spped, volts, ampere load, power factor, demand load,
Inlet guide van positioner, bleed valves, lubrication pumps
Pressure, temperature of combustion chamber & turbine stages,
Thrust and exhaust bearings, ambient and cooling air.
Monitoring of ideal spin turbines, turning gears, exciter UPS etc.
Monitoring of scrubbers and condensate level etc.

3. worked as a senior control room operator in
SWCC Saudi Arabia from 1992 to 1996.

Responsibility
Operation of 28 inches and 36 inches pipeline through
DCS /SCADA system.
Remained responsible to operate booster pumps of 1450 m3 / hr
Capacity with a high discharge pressure, surge vessels, air banks,
Air compressors, cooling plant, reservoirs, diesel pumps,
Flow and pressure control valves. pigging
Operation of hydraulic and pneumatic control valves.
Chemical injection, observation of all parameters and PLC system,
Preparation of reports and forwarding to operation manager.

4. worked in TISCO ltd at jamshedpur from 1986 to 1992
As a Power Plant Operator.

Responsibility
To operate steam turbines, boilers, compressor, condenser,
Air ejector, feed pumps, turbo and motor driven pumps,
Cooling plant, condensate extraction pumps, surge tanks,
Lubrication pumps, cooling water pumps and many more
Auxiliary system.

5. worked as an Operator in AKKHOMS power station
In Libya from 1981 to 1983.

Responsibility
Operation of Babcock Boilers, desalination plant, Reserve feed tanks,
Oil pumping station, shipping pumps, heat trace system,
Reserve feed tank, sea water pumps, chemical dozing pumps, cooling pumps.
Pipe line operation, jetty control board operation for ship anchoring
And unloading heavy fuel oil.
Observation and hourly reading of all parameters of control board
Attending emergency operation and startup boilers with field coordination.
Maintaining log books and energy reports / activity reports.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 301 to 350 of 1342)Go to Search Parameters...
Brief Description
I've a large idea about oil field industry, and especialy in slickloine operation, I worked in bouth gas and oil wells ,with differents completions...
Operations, Business Developement, International experience, North Africa, Saudi, Kazakhstan, Russia.
Instrumentation Technician, Instrument Specialist.
Vision for SCM: Looking for a challenging position to add more value for the integration of supply chain management process for achieving highest level of customer service at low cost to serve basis in any FMCG Foods,Cosmetics,chemicals, oil & gas businesses.
Summary: Presently working for Transocean Sedco forex Offshore In as medic / safety. Open for worldwide placements and ready to travel extensively .
From my career, I have acquired considerable heavy equipment and stationary engine and compressor experience. This experience includes repairs and maintenance to complete overhauls and supervisory experience as a tem lead hand and shop supervisor.
Oil/gas/water/wastewater electrical
24 years experience in the printing industry with over 15 years in supervising,managing.
WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O
Critical Care Paramedic
CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent
The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.
having 3 yrs technical diploma & 1 yr boiler operation certificate, computer literate, worked in Libya/Saudi Arabia/Kuwait/Sudan/India in various energy field like, power plant, gas /steam turbo genset/ diesel engine /auxiliaries/utilities/oil field process 7 production operation / dcs -cont room
CSWIP Painting Inspector 3.0 Cert no.30494/Supervisor /IT Literate, CPCS Slinger (LOWLER)
Well servicing (Coiltubing, Wireline and Pumping Operations).
Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager
I have 2-3 years experience in drivin overhead gantry cranes both in cab and pendant. I also have 4-5 years experience in rigging and lifting
A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.
Determine, develop and establish ownership records, based on review and interpretation of title opinions, legal documents, paysheets, or divisions of interest. Set up ownership records, changes in ownership based on analysis and interpretation of conveyance documents, probate proceedings.
24 years of Machinist experience, with knowledge in heavy and preventative maintenance, experience in the Industrial Mechanic/Millwright trade Supervision of production and quality control mechanical aptitude WHMIS and OHS training
im hardworking and willing to work on overtime
AT PRESENTLY WORKING IN KUWAIT NATIONAL PETROLEUM CO. KUWAIT AS SCHEDULER, I HAVE WELL KNOWLADGE IN PLANNING & SCHEDULING AS WELL EXECUTION OF SCOPE.
General Maintenance and Mechanical Field
Experienced self-starter in LNG and Gas commercial with strong managerial and problem-solving skills and oversea exposure in LNG Supply Chain Optimization
I have been a Journeyman Instrument Mechanic for eight years; I have been in the field for thirteen years. I have extensive experience working on plant maintenance, shutdowns, start-ups and commissioning. For the last six years I have been contracting myself out to various companies.
Employment history with over 15+ years oil and gas exploration experience.
Extensive Industrial Mechanical Maintenance, Supervision, Planning & Coordination within Europe, Canada, Middle East, North / West Africa and the Caribbean.
Welding positin utilizing technical skills for a growth-oriented organization.
Mechanical Engineering,Commissioning,Supervisor, A1 SVQ Mechanical Assessor, City and GuldsFull Technological Certificate
Qualified Electrician. Hazardous Area Installation, maintanence, inspection and testing Specialist. IRATA level 1 rope access technician.
I am a highly motivated & adaptable materials/ logistics specialist with a thorough knowledge of all disciplines within material acquisitioning, inventory management and material logistics. My experiences have included responsibilities of high value projects mainly with in the drilling industry.
Field Operator / Panel Operator Pre-Commissioning & Commissioning Startup, Shutdown And Plant Emergencies Handling
I have knowledge in Maintenance and Operation procedures. My experience is in PM's, Reliability, Planning & Scheduling. I would like to continue to grow in the Petroleum Industry and at present I am continuing my education in Operation Controls. I am also very interested in offshore or shift work.
IIT Chemical Engr with 23 yrs exp in Sales & Marketing of Downstream Petroleum & Petrochemical Products in Fortune-500 Oil & Gas Company
Pipe fitter welder
Oil and gas industry for over 12 years.
Well Intervention, Well Services, Field Well Completion,
Sir, as I am working since couple of decades in oilfield both onshore and offshore I have come across all sorts of jobs related with mobile land and offshore rigs, jackup self elevated platforms, barges heavy lift ships upto 2ooo ton crane capacity, engines cat, GM, cummins, mudpumps,bop,X" valves
Crane 1B/2A – with a Title Professional Operator Rigger
Second year apprentice steamfitter/pipefitter
Installation of ESD (emergency shutdown) and DCS (distributed control system).(honeywell brand)
I am a graduate with Chemistry in 1st class having 24 years experience as a Chemist/ Senior Lab Technician in Petroleum Refinery (Takreer, ADNOC) (10 Years), Natural Gas Plants(5 years) (in Malaysia and DUGAS), Petrochemical Plants (5 Years) (MTBE & Pentaerythritol) and 3 years in Pesticid
Microstation
As I am having good experience in Electrical field, working as a Electrical Technician for a contractor employee in Kuwait National Petroleum Company, Mina Al Ahamadi Refinery
Capt Amit Bhandari, DPO. Experienced on offshore supply and deep sea anchor handling vessels. 220 T bollard pull. Carried out towing operations, rig moves, pipelaying assistance. Holding DP courses and certification
SENIOR MECHANICAL TECHNICIAN (5 YEARS EXPERIENCE)
Disrtibution specialist
I have extensive experience in installation, repair and maintenance of a wide range of instruments. I have acquired experience in control loops which include but not limited to temperature, flow, level, pressure, ratio, PH& Conductivity, Gas Analysis, weigh feeders, SCADA and PLC’s, Pneumatics ,Hydr
Holder of Diploma in Computer Systems Analysis and Design
I have three years diploma certificates in instrumentation and i have more then 20+ years experience in instrumentation at present i am working with american company at west africa on offshore platform in instrumentation departments.
1   2   3   4   5   6   [ 7 ]   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com