Resume - Internationally Experienced Heavy Equipment Mechanic

Misco Jobs

Resume #42869

CONTACT INFORMATION:
View contact information...

EDUCATION
1980-1981
Red River College, Winnipeg, Manitoba, Canada.
Obtained Heavy Duty Diesel Mechanic - Trade Certificate/License
Interprovincial Level.

1965-1969
Worthing College, West Sussex, England
Obtained Heavy Duty Diesel Mechanic - City and Guilds Diploma.
Did five years apprentice mechanic training in a heavy equipment workshop with Hall & Company Construction Ltd, Worthing, England.

1960-1965
St Andrew's Secondary School, Worthing, West Sussex, England
Passed the Eleven Plus Examination

EMPLOYMENT
2001 August - Present
Sifto Canada Mining, Goderich, Ontario, Canada.
Employed as Heavy Equipment Underground Mechanic

1999-2001
Ontrac Ltd, Windsor, Ontario, Canada.
Employed as Workshop Mechanic, Heavy Equipment.
I repaired and overhauled all earth moving equipment for this John Deere dealership. My work involved in-workshop repairs to all major components i.e. engine/transmission overhauls, axle rebuilds and major hydraulic repairs. I was also responsible for on site diagnostics to customer equipment as required.

1995-1999
Schlumberger-Geco Prakla Division, London, England.
Employed as Senior Mechanic Supervisor.
First in Saudi Arabia and then in Libya.
I managed the workshop in a hands-on operation. I supervised the mechanics in the daily repair of vehicles and equipment for seismic operations. I was responsible for maintaining an on-site operation to a constantly moving workshop in a desert location within very remote areas. I managed stores inventory and maintenance schedules for the equipment used in the seismic operations i.e. caterpillar diesel engines and equipment and Cummins powered equipment including camp generators. In addition, I recruited and trained the local mechanics to work on the operation.

1990-1995
Hudson Bay Mining and Smelting, Leaf Rapids, Manitoba, Canada.
Employed as a Heavy Duty Lead Mechanic – Underground Copper Mine
I repaired scoop trams, trucks and Tamrock drilling equipment. I overhauled major components for all underground mining and drilling equipment i.e. engines, transmissions and final drives. This included Clarke, Wagner and Caterpillar mobile equipment.

1988-1990
Ove Arup Ltd., London, England.
Based in Tanzania, East Africa.
Workshop Foreman
I ran the workshop operation which involved overhauling the Parker Crusher and maintaining the support equipment i.e. Caterpillar loading shovels, Tamrock and Airtrack drills and pumps.
I supervised the workshop and the training of a staff of local mechanics in a hands-on operation to ensure the maintenance and smooth running of the equipment for the Songea Makumbaku highway operation. In addition, I was responsible for all repairs and maintenance to all camp generators and equipment in a difficult environment. This work involved training local labor with limited resources in a very remote location. Use of initiative, improvisation and self-motivation was a major aspect of this contract.

1982-1988
Biwater International U.K.
Various locations overseas
Mechanic Assistant Supervisor and then in 1984 promoted to Workshop Supervisor.
The company had ongoing jobs in several countries, Iraq, Jordan, Nigeria, Abu Dhabi and Trinidad. Initially, I was sent to Iraq to set up a workshop for a new contract 50-km south of Baghdad. This included installing on site camp generators and setting up the workshop and parts department. I was responsible for mobilizing equipment as it arrived on site after being shipped from the U.K. When the operation was mobile, I ran the workshop on a day to day basis and managed the stores inventory of parts. In addition, I provided the training and supervision of the local staff of mechanics. Later on, I traveled extensively to other countries to implement efficient and economical workshop practices for those operations.

1980-1982
Hudson Bay Mining and Smelting Company Ltd., Leaf Rapids, Manitoba, Canada.
Copper Mine
Employed as an Underground Heavy Duty Mechanic.
I repaired and maintained all mobile underground mining, drilling equipment and support services.

1978-1980
Volker Hochtief Ltd
Two year contract in Saudi Arabia.
I was employed at Jubail on a harbor project as a Field Service Mechanic.
I had to complete on site repairs to all heavy-duty equipment i.e. mobile cranes, caterpillar earth moving equipment and stationary equipment consisting of mobile batching plants, generators and air compressors.

REFERENCES
Qualifications and other references available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1485)

Go to Search Parameters...

Brief Description

Installation of electrical and instrument equipment, commissioning and pre start up, layout plc panel and install plc parts, wiring of motor controls in mcc, and construction works.

Sales/Marketing business Development Manager with technical exposure and hands on in Well Testing, Down hole Testing and production facilities.

Computer and management skills, mechanic supervisor, diesel performence and diagnosis, inventory quality and control, have worked in middle east and Africa.

Storeman, Expediter, Roustabout, Clerk

Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.

Pipe Welder+Metal Fabricator+Iron Worker

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

Boilermaker for 15 years petro and power

Professional Heavy Duty Mechanic with leadeship and overseas experience seeks full-time or contract position with a well respected organization anywhere in the world.

19 years of welding experience, oil and gas fabrication. superintendent, engineer, inspector.

High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE.

With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Driller/Directional Driller experience, looking for either, and will travel anywhere.

Senior Directional Driller Offshore/Land Domestic International 25+years

I am a mechanical engineer and I have been in the OIL & GAS DRILLING profession for past five years as rig mechanic, who is engaged in repair and maintenance of RIG equipments. I have good communication skills as well as great commitment towards work

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I have strong organizational and people skills. I communicate well with the craft and customer, both written and verbally, I am also computer literate.

I am a Chemical Engineer by qualification. In my professional career spanning over nineteen years, I have worked in the Marketing function of leading players in the petrochemical industry in India, with regional responsibilities spanning across Asia, Western Europe and Africa.

Electrical Technician Electrical instructor

Applying Insulation and Sheet metal Cladding.

1st class welder fitter i have six full years expierience in this field

Welder ****16 Years Experience***

Journeyman Electronics Technician,Seismic,Telecommunications,Copper Cable Splicing

Skills are; mechanic, HVAC, heavy equipment etc.

Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

I HAVE 11 YEARS EXPERIECE AS MOTERMAN ,I AM HOLDING PANAMA THIRD ENGINEER UNLIMITED C.O.C

Millwright/Safety

i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences.

10 plus years as an inspector

DIPLOMA IN MECHANICAL ENGINEERING

Experienced, over 10 years as an instrument control technician commissioning start-up Hydro carbon, fertilizer and petrochemicals plants

Oil field experience in a variety of areas, Supervising drill crews.

I can work any where on a drilling rig, Driller,Derricks,Motors,Floors ect.

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

Professional Experience Mainly related to Industrial and Oil Jobs

Extensive experience in the Electric Sumbersible Pump Industry

15 years experience in the Machinist trade on both CNC and manual machine tools.

Nace 1 Coatings Inspector

Experianced offshore rigger and AB seaman, 200t captain, With US work visa, DSV, AHTS, Supply vessels, jackup barges

Petroleum Landman

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Heavy Equipment Operator

Senior Civil / Structural Designer

I have had both mechanical and condition monitoring experiences which will make me a very competitive candidate to fulfill condition monitoring and/or mechanical position. I have had ISO Cat-II vibration analyst for condition monitoring.

Journeyman Heavy Duty Technician

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out