Resume - Oil Field Inspection Specialist (30 year career), experienced in all aspects of ...

Misco Jobs

Resume #43007

CONTACT INFORMATION:
View contact information...

CAREER HISTORY:
1980 - Present Esso Australia Ltd and Exxon Exploration & Production Chad Inc.(Africa).

2005 - Present Exxon Exploration and Production Chad Inc. Africa
In-country Manager: Facilities Integrity & Corrosion Management

Responsible for establishing infrastructure for the Equipment Integrity Management System and implementation of the Inspection and Corrosion Management program for a 150kstb/day Oil plant, a 15km3/day gas system for Turbine fuel, 300kstb/day Formation Water and 1200km of interconnecting high pressure gas & Oil Emulsion pipelines, in the Kome area of Chad, through Camaroun to the FSO facility at Douala.

2000 - 2005 Esso Australia - Longford, Australia
Pipeline In-line Inspection Technician

Managed logistics & implementation of the In-line Inspection of Offshore and Onshore pipelines in an 800km network of high pressure oil and gas pipelines associated with Australia's largest crude oil and natural gas processing facilities; some of these pipelines were up to 30 years old. During this time a backlog of pipeline inspections was completed including some which had not been started because of difficulty with preparation (cleaning), or requiring infrastructure change to expedite. New Project Management systems were introduced to overcome Contractor-Operations interface challenges and to monitor Contractor performance.

1987 - 2000 Esso Australia - Longford, Australia
Senior Equipment & Pressure Vessel Inspector

Responsible for the inspection of 800 pressure vessels in 3 Gas Plants and 3 Crude Oil Stabilisation Trains, and associated equipment, supplying 100% of the state of Victoria's gas needs and 60% of Australia's crude oil production.
The role required close co-operation and co-ordination with Process Operations, Engineering and with the Maintenance Department were established, to achieve the annual Integrity Management Objectives.

1982 - 1987 Esso Australia - Longford, Australia
Equipment & Pressure Vessel Inspector

Plant & Equipment Inspector for Offshore Producing Operations and for the Longford Crude Stabilisation and Gas Plant Facilities, processing up to 500,000barrels/day of oil. Managed the Inspection scope and implementation for numerous Crude and Gas Plant shutdowns, initially working in liaison with the Government Inspection Authority, but following changes to Statutory Regulations, working independently in compliance with the Plant Safety Regulations.

1980 - 1982 Esso Australia - Sale, Australia
Inspection Engineering Technician

Inspection Technician with Inspection Engineering Group, Esso Australia, monitoring QA/inspection of Platform and Plant projects until specialising in fabrication of pressure vessels and major construction activities, monitoring Quality assurance and compliance. Duties included reviewing inspection programs for Production Equipment and reporting to the Statutory Authority.

1975 - 1980 Non-Destructive Testing, North Sea (UK) and Australia
NDT Technician,

NDT work in fabrication workshops onshore & offshore on Construction barges and Platforms in the North Sea,
Inspection & NDT of the Moomba Gas Pipeline during revalidation of QA data.
NDT of open cut mining plant, rolling stock and Port Facilities for Mt Newman Mining based in Port Hedland, WA.
Supervising the inspection of Pipe fabrication, in Pipe Mills throughout Japan, for the Bombay High Project(Indian Government).
Construction NDT for the Jeerilang Gas Turbine Project, in the La Trobe Valley, Victoria.

EDUCATION AND TRAINING

SCHOOLING: Passed Matriculation in 1969 and completed 2 seimesters of Mechanical Engineering Degree at Royal Melbourne Institute of Technology(not completed).
Studied Radiographic Safety, Ultrasonics(level 1) and Industrial Radiography at the Welding Institute(Abbington), Cambridge, UK.
Completed courses in Quality Assurance, basic welding, Corrosion Management and in Esso Inspection Practices, Standards and programs(Cranes, Pressure Vessels, Piping); and in general work development tools, including Risk Assessment, Root cause Analysis, Equipment Strategy process and Change Management procedures.
Attained AICIP certification as an In-service Inspector (#0018) when it was first introduced in 1997.
I have completed Safety Induction training to all Esso Production facilities, including Helicopter Underwater Escape Training (HUET), Fire Fighting and First Aid training.
Completed training in MS Project, Excel, Access, and Outlook. Also use SAP application for Maintenance management (Esso Australia version is known as WIZARD)

MEMBERSHIPS: Australian Institute for Non Destructive Testing (1976 to current)
Associated Pipeline Industries of Australia

PERSONAL:
My preference is to work a 28/28 Rotation or similar.

REFERENCES: Available on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 1345)

Go to Search Parameters...

Brief Description

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

4th class power engineer, h2s alive, fall arrest, forklift certificate, hcfc refrigeration certificate

Skilled in AutoCAD, Microstation, Survey Data Tech

Account Management. Contract negotiation with clients, proposal preparation and follow up. Market analysis and account development identifying prospective customer needs and developing innovative solutions to satisfy their requirements

industrial maintenance mechanic/millwright ( red seal ) any thing mechanical ,some electrial

Skilled pump technician w/ 4 yrs experience building & repairing down hole pumps incl. insert & tubing pumps. Completed training for field repairs and pump certification (Levels II - well operations & Level III - pump mechanics). Hard-working, good attention to detail. Excellent evaluations.

Highlights of Qualifications: Diploma in Electrical Engineering from Maharaja Sayajirao University of Baroda, Gujarat, India. Registered license holder of Industrial Electrician from Ministry of Training colleges and University, Ontario, Canada (Licenced 442A), Applied for C.E.T. certification to OC

Instrument Tech that is capable of working on most end devices and bend 1/4" to 1/2" SS Tubing

Oil Field Inspection Specialist (30 year career), experienced in all aspects of plant equipment inspection: Pressure Vessels, Gas fired and Waste Heaters, Tankage, Piping, Pipeline, PSVs, Offshore Platform structures & Cranes. Skilled in Risk Based Inspection & Equipment Strategy procedures.

Pipe fabrication, pipe fittings, layout, maintanence and servicing, assembling

maintenance millwright-28yrs. from trainee to maint. superintendent

DIVERSE POWER GENERATION and MAINTENANCE MANAGEMENT PROFESSIONAL

Coiled Tubing Supervisor

Floorhand certification,driver lic.,whimis,H2S

My sckills cover a broad range of heavy equipment. Along with this I have made sure I have the safety skills needed to work in the Extreem Alaska enviroment.

C.A.W.I. PRESENTLY SEEKING C.W.I./BOILERMAKER FOREMAN

Instrumentation Engineer.Vast experince in Instrumentation Field.SAP Knowledge.Strong knowledge of PROFIBUS PA + DP.

Hold a valid Class 3 Singapore Driving licence, Hold a valid STCW 95 VI/1 Basic Safety Training for Fire Prevention and Fire Fighting, Fluent in written and spoken English, Proficient in Microsoft Office

Industrial Construction Project Management

Instrument Technician , FPSO , Onshore , Offshore

Crane Operator, worked offshore for 8 years. Qualifications include HLO, Rigging, First Aid, etc. I am confident & reliable with a flexible outlook to my work & a strong commitment to safe work practices. Extensive travel has given me the ability to develop a good rapour with local people

Refer below

"External foreign trade", English, French, native Russian, Norwegian, Business Correspondence, 2 years experience, advanced PC user, typewriting, purposeful.

I have worked 5+ years helping my dad in the plumbing/heating field doing various jobs such as installing sewer and water piping, residential ductwork and hydronic heating.

I have worked during 9 years in the pumping services doing almost all the time cementing.

Over 34 Years of experience in NDE Field.

12 year’s experience as a structural drafting & checking in Shipbuilding, Oil & Gas onshore / offshore & Refinery field. I was involved structural & fabrication projects specialized in autocad design-drafting, detailing and fabrication drawings for marine, offshore structure.

Unsolicited letter for seeking suitable placements.

I have 8 years of mechanical/electrical maintenance in heavy industrial settings.

I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis

Trained at UTI houston

I finished my vocational course as an Electrician. I am knowledgeable in residential and Industrial Wiring. I can also perform motor control operations and as well as Programmable Logic Control. I have been a maintenace technician before in an industry.

25 Years experience in Refinery Process, Boiler Plant Operations and Boiler Inspections

BSc. in Applied Physics & Instrumentation. Hands on field experience in Biopharma and the Oil & Gas Industries

Free! Equipment Maintenance; Mechanical Experience; Fork-lift Certified; CDL

Electrician 309A

6G Coded Pipe Welder T.I.G.

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Construction/Mechanical Project Manager and Engineer with over 15 years of experience including recent projects in the construction industry.

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

CAD Engineer

I am a trained and experienced Steward with excellent Floorhand training. Security Clearance Canadian Government Enhanced Security Clearance *willing and able to relocate *Marine Medical completed March 3 2004

I am working as Plant Operator in Refinery & Petrochemical Units since last 08 years Reliance Industries Ltd. [Petroleum Division, 650 KBPSD crude processing capacity]

• Qualified Metallurgical & Materials Engineer with 12 years of Proven Capabilities in Research & Development, this includes, Product Development, Application Development, Process Improvement, Energy Conservation, Quality Improvement, Materials Testing, Characterization & Customer Complaint Investi

20 Years Construction Experience

DIPLOMA IN BUSINESS ENGLISH AND DIPLOMA IN PERSONEL MNGT.+AUTO CAD

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Deck officer with five years of work experience on board of AHTS’s, OSV’s, Container, Con-Ro and other vessels as Cadet/OS, 3rd Mate, 2nd Mate, Chief mate and Relief Captain.

I am a journeyman plumber/gasfitter with 22 years experience, with 5 years experience as a facilities maintenance planner. I am looking for variety in my field of experience.

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out