Resume - Have more than 13 years of experience in log interpretation

Misco Jobs

Resume #44680

CONTACT INFORMATION:
View contact information...

OBJECTIVES:
Seeking assignment in open and cased hole log data interpretation, wire line logging service and petrophysical research studies.

CORE COMPETENCIES:
Petrophysicist with wide range of working experience in open hole, cased hole and production logging data interpretation.
1. Log quality check / control of petrophysical data.
2. Qualitative interpretation of open hole, cased hole, production logging data for taking on the site decisions.
3. Quantitative interpretation of open hole logs for formation evaluation, reservoir characterization and formation parameter estimation.
4. Qualitative / quantitative estimation of reservoir parameters using CMR logs.
5. Petrophysical analysis using work station based software (GEOFRAME).
6. Capable of handling following Geoframe modules:

- Data load module for loading data from different media.
- Composite log display module for display of logs.
- Well Edit module for depth match, depth shift match and log Splice.
- Preplus module for environmental correction.
- ELANplus module for petrophysical analysis and estimation.
- Ressum for reservoir parameter estimation.
- Playback of CMR log.
- Re-computation of CMR log output with changed parameters.
- Playback of Dipmeter, FMS and FMI log data

7. Quantitative interpretation of production logging data.
8. Data acquisition for Open hole, cased hole and production logging services.

PROFESSIONAL PROFILE:
Interpretation of well logs:

Have about 10 years of experience as a log analyst. Have sound knowledge in interpretation of open hole, cased hole and production logging data.
* Presently using ELAN plus (Geoframe) software for interpretation of open hole logs for the last three years, otherwise used inhouse software LOCPROC.
* Analysed the open hole and production log data of fields in India, mainly Mumbai High field, Lakwa and lakhmani field of Assam Arakan basin and Ahmedabad and Mehsana area of Cambay basin. Issued formation evaluation report for exploratory and development wells.
* Made qualitative use of log data from CMR, FMI to facilitate interpretation of open hole logs.
* Quantitative interpretation of production logging data from flow meter, fluid density and temperature tool were made leading to study of production profile, injection profile, fluid loss if any. Detection of other well problems such as cross flow, thief zone, casing leak, packer leak etc have been made using temperature, fluid density, continuous flow meter tool data along with water hold-up meter, noise logging tool data and tracer survey data.
* Cement evaluation, casing corrosion etc using CBL, CAST, USIT etc.

Data acquisition:

Worked for about 13 years as a Logging Engineer for acquisition of well log data for open hole, cased hole and production logging jobs.
* Recorded data using resistivity tools (DLL, DIL), porosity tools (CDL,CNS, BHC etc) along with Gamma Ray and Caliper log for open hole logging.
* Have experience of recording data from fluid density, temperature, flow meter, noise logging, water holdup meter, HP pressure gauge in producing / injecting wells. Recorded data using CBL tool for cement evaluation behind casing, Multi arm casing caliper to study casing condition and free point indicator tool to detect stuck point for tubing / drill pipes.
* Have experience in perforation jobs for conventional and under balance perforations.
* Have experience in setting Bridge Plugs / Packers using wire line equipment.

Supervision / management of logging activities:

Worked for about three years for coordinating logging programs with logging service companies. Preparation of logging suits for exploratory and development wells, and financial evaluation of workload.

EDUCATIONAL QUALIFICATIONS:
Acquired graduation degree (B.Sc.with Physics, Chemistry, Mathematics) from Delhi University, Delhi (India) in Ist division.

Acquired post graduation and doctorate degree (M.Sc. and Ph.D in Physics) from Kurukshetra University, Kurukshetra (India). M.Sc. was completed in Ist division.

TRAININGS RECEIVED:
Have received number of in-house trainings. Some of them are as given below:

1. Training on DDL-V logging unit, Dec 9-12,1991 at Ahmedabad. (Facalty
HLS India)
2. Training in Unix, C, C++ and computer net working, May 24 – June 18, 1993
at NCST, Mumbai. (Facalty NCST)
3. Basic Petroleum Geology, Sept 7-11,1998 at Dehradun. (Facalty ONGC)
4. Advances in well log applications, Oct 6-10, 2003. (Facalty Mr.O.Serra)

TRAINING ABROAD:
During 1985, received training in " Operation repair and maintenance of Sodesep Production Logging Unit and related equipment". The duration of the training was six weeks and was conducted by engineers of M/S Sodesep, at Vitrolles in France.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1346)

Go to Search Parameters...

Brief Description

Free! Extensive experience in the Electric Sumbersible Pump Industry

Free! Helicopter view, fast analysing, creative in finding solutions, mind setter for safety

Free! I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

I"m a Skilled South African Millwright and Mechanical Fitter (Red Seal)

Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie

I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.

26 years maintenance electrician troubleshooting using plc and ladder logic. dc drives ac and dc motors and controlers

Have more than 13 years of experience in log interpretation

Offshore Oil Rig Motorman

Utilize extensive experience as a mudlogger and an LWD/MWD operator as a well site geologist

Driller / Tool Pusher (Onshore / Offshore)

Project Management & Supervision, System Analysis, Design & Development Work, Device Wiring & Installation, Commissioning, Operation & Maintenance, Planning, Schedule & Decision Making

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

1) Project Management -Any Refinery unit project under USD 250 , from A to Z .2) Refinery Maintenance with Turn Around Management of any unit .3) Any ISO system or safety related jobs of a Refinery .

Experienced professional having two full cycle SAP implementation experience

WELDER

To fully leverage my working experience, education and potential, I am looking for an apprentice Millwright job and operator related positions at entry or intermediate level to continue my oil career in Canada.

Long experienced (25years) in marine bunkers-lubes business, with a strong ability to multitask expertly and efficiently.Mainly active in negotiating, promoting and developing the supply business, while at the same time maintaining strong values and ethics.Able to work under pressure.

Millwright/Industial Mechanic and Power Engineer 3rd class.

HVAC BOILER TECHNICIAN

Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

Master Electrician with Millwright experience

I have over almost 35 years of technical experience, with almost a twenty five-year career base established abroad. As my enclosed resume indicates, I have more experience in maintenance machining job. My experience includes operation. maintenance and machining of various equipment parts involved in

32 years exp in seismic data processing. QC and interpretation

CAPEX & OPEX multiple projects. 22 years of EPC working background; oil & gas upstream EP, petrochemical, chemical, power generation, rail, water, nuclear & manufacturing (UK - Middle East), business & contractual awareness - FIDIC, IchemE Alliance agreement FOB, CIF, SMMIEC & SMM risk management

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

city and guilds ,years ,1,2,3 . advance craft , higher national

Analyzer and Instrument Technician, with significant experience through training and certification

Extensive experience in power, petrochemical and utilities plant startup, operation and training

I have drive, motivation, confidence and determination.

Alberta B pressure welder/red seal certified. safety tickets all up to date

Caterpillar trained technicians and mechanic can do overhauling and repair all caterpillar engines generators and machines and have a good knowledge in troubleshooting of mechanical and electronic caterpillar engines,can do components repair, pumps,final drives,pump drives,trnsmission torque conv.

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

More then 20 years experience as Welder

I Retired after 20 year of USAF Military Active Duty as an Aerospace Ground Equipment Technician and work for 20 year as Aerospace Ground Equipment Technician. One year Aercraft Aresting Barrier MAAS / Bak -12 Mechanic and 2yrs 7months Power Pro Generation Technician.

I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.

I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.

Over 15 years of progressive work experience in office management providing effective and comprehensive support to managers and senior executives of the company. Document control and administrative works ranging from typing, processing of documents to data control and filing.

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,

I have extensive experience in plant start-ups, trouble-shooting, and process management as a supervisor, technician and operator. I am seeking an operations oriented position.

at present working on cyberbase rig totally computerised

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out