Resume - INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materi...

Misco Jobs

Resume #44777

CONTACT INFORMATION:
View contact information...

RAPHY T. JOSEPH

INSPECTION ENGINEER / INSPECTOR (QA/QC / Welding / Piping / NDT / Mechanical / Materials / Coating and Painting)

EXPERIENCE BRIEF

I have 17 Years Experience in PIPING FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities and Work Supervision) in large International projects (PETRO-CHEMICAL, CHEMICAL, OIL, GAS, REFINERY & PIPELINE Projects)
Roles & Responsibilities:
* Review Contractor's method statements, QC procedures, ITP and Quality Plan and assist with establishing acceptable working practices for construction activities.
* Monitor delivery of permanent materials and ensure the quality of products / consumables / materials comply with requirements of established Standards & Specifications.
* Perform routine surveillance, inspection, monitoring, auditing & assurance of Contractor's site activities(Fabrication and Welding, NDT, Coating and Painting) in accordance with the Projects and Contractors, specifications, ITP and Quality Plans.
* Identification of risks to the quality of work and the completion program, and associated solutions.
* Supervision of Piping Fabrication, Welding, Mechanical and Painting jobs (Construction & Maintenance) in line with Project requirements
* Ensure all the personnel employed and operating in welding and NDE activities is duly skilled and qualified in accordance with the applicable specifications, codes and regulations. Interpret and evaluate NDT Results, witness Hydro test, Pneumatic test and Post test Re-instatement.
* Conversant with International Codes & Standards like ASME, ASTM, AWS, API, ARAMCO, QP, SHELL / PDO and AGIP Specifications.
* Ensure all pre-construction activities and qualification trials are witnessed and approved as necessary. Ensure the Inspection & Test Plan of each activity is fulfilled and "hold points" of the company are completed in due time.
* Audit, inspect equipment of Contractors. Advice and assist Contractors in maintaining and upgrading their equipment to ensure high quality job. Trouble shooting. Maintain day-to-day liaison with Contractor's site QA/QC staff. Prepare daily reports of all site QC activities performed.
* Review and comment upon Contractors daily inspection records for activities covered and investigate any anomalies / queries
* Raise non-compliance reports where applicable and ensure satisfactorily closed out
* Repair follow-up, Conforming line check as per P&ID, NDT clearance, Punch List preparation, follow up of final completion

CAREER HISTORY:

SENIOR WELDING INSPECTOR, BUREAU VERITAS INSPECTION LTD. August 2006 – June 2007. (Worked as Company - AGIP KCO- Representative) Kashagan Experimental Development Project – AGIP KCO, Atyrau, Kazakhstan.
Responsibilities: -
* Review Contractor's method statements, QC procedures, ITP and Quality Plan and assist with establishing acceptable working practices for construction activities. Witness and approve all pre-construction activities and qualification trials.
* Monitoring, auditing & assurance of Contractor's site activities in accordance with the Projects and Contractors, specifications, ITP and Quality Plans. Executes the specific inspections on materials, equipments and construction/installation activities on site.
* Ensure all the personnel employed and operating in welding and NDE activities is duly skilled and qualified in accordance with the applicable specifications, codes and regulations. Raise non-compliance reports where applicable and ensure satisfactorily closed out
* Maintain day-to-day liaison with Contractor's site QA/QC staff. Prepare daily reports of all site QC activities performed.
* Review and witness of NDE. Issuance of Punch list. Giving clearance and witnessing for Hydrostatic Test. Review Test Packages

SENIOR QA/QC INSPECTOR–MECHANICAL,WORLEY PARSONS OMAN, Dec. 2004–May 2006, (EMC Project, client - Petroleum Development of Oman)
Responsibilities: -
* Monitoring and Inspection of Fabrication, Welding and Painting activities of Piping and Mechanical jobs as per ASME/ANSI B 31.3 and SHELL / PDO Specification. Monitor delivery and storage of permanent materials & Consumables and ensure materials are compliant
* Conducting PQR and Welder Qualification tests and witness Destructive tests as per ASME Section IX / 31.3. and SHELL / PDO Specifications.
* Ensure all the personnel employed and operating in welding and NDE activities is duly skilled and qualified in accordance with the applicable specifications, codes and regulations. Perform Internal & Sub-contractors audit. Perform Functional checks and mechanical completion checks
* Maintain day-to-day liaison with Sub Contractor's site QA/QC staff. Prepare daily reports of all site QC activities performed.
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Review and Interpretation of Radiography films & other NDT, witness & review PWHT, Hardness, PMI.
* Raise NCR where applicable and ensure satisfactorily closed out. Prepare Final Test Packages. Issuance of Punch list. Witnessing Hydrostatic test

QA/QC INSPECTOR (WELDING / PIPING), CONSOLIDATED CONTRACTORS INTERNATIONAL COMPANY – QATAR. 2003 Feb.–2004 Oct. (Common Cooling Water Pipeline Project, client - Qatar Petroleum)
Responsibilities: -
* Conducting P Q R & W Q T and witness Destructive tests as per ASME Section IX, AWS D 1.1, AWWA M11 / C206 and API 1104.
* Monitor delivery and storage of permanent materials & Consumables and ensure materials are compliant
* Monitoring and Inspection of Welding, Piping Fabrication works from piping pre-fabrication to field installation of Carbon Steel and Copper Nickel Piping as per API 1104 and Project specification for Pipeline Project (Common Cooling Water Project,).
* Verify/Review weld parameters of SMAW,TIG,SAW,FCAW,MIG process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS,LTCS,(Sour & Non Sour)Low alloy, Cu-Ni materials.
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Review and witness of NDE. Review and Interpretation of Radiography films & other NDT, witness & review PWHT, Hardness, PMI
* Issuance of Punch list. Giving Mechanical and NDE clearance for Hydrostatic Test. Witnessing Hydrostatic test.
* Perform Internal & Sub-contractors audit. Preparing Inspection Reports and Final Test Packages.

QA/QC INSPECTOR-WELDING / PIPING.MID EAST CONSTRUCTORS LTD–QATAR.2001May–2002May.(LNG Plant - DUKHAN, client - Qatar Petroleum)
Responsibilities: -
* Conducting PQR and Welder Qualification tests and witness Destructive tests as per ASME Section IX/31.3 and QP Specification ESL 22/23.
* Monitoring and Inspection of Fabrication, Welding and site installation activities of Carbon Steel and Stainless Steel Piping as per ASME/ANSI B 31.3 and Project specification. Monitor delivery and storage of permanent materials & Consumables and ensure materials are compliant
* Verify/Review weld parameters of SMAW,TIG,SAW, MIG process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS,LTCS,(Sour & Non Sour)Low alloy materials.
* Review and Interpretation of Radiography films & other NDT, witness & review PWHT, Hardness Testing, PMI
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Follow Up of Non Conformance Reports. Issuance of Punch list. Witnessing Hydrostatic test. Preparing Final Test Packages

QC INSPECTOR-MECHANICAL, A.Y.T.B.CO.LTD-Saudi Arabia. 1995Dec–2000June. (Petro-Chemical & Refinery projects,clients - LUBREF-Yanbu, SADAF-Jubail)
Responsibilities: -
* Material Inward Inspection and check material trace ability through out the execution of work.
* Monitor and Inspection of Fabrication and site installation activities of Structural and CS, LTCS, SS, DUPLEX, Low Alloy Piping jobs.
* Verify/Review weld parameters of SMAW,TIG,SAW,MIG process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS,LTCS,(Sour & Non Sour), SS, Low alloy, Cu-Ni materials.
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Interpreting and evaluating of NDT Results, witnessing Hydro test, Pneumatic test and Post test, Re-instatement
* Preparing Test Packages and Giving Mechanical clearance for Hydrostatic Test. Witnessing Hydro Testing.

ASSISTANT ENGINEER-QC, PETRON ENGINEERING CONST.LTD-INDIA.1994Sept–1995Dec, (Poly Propylene project,client - Reliance Industries LTD, India)
Responsibilities: -
* Conducting P.Q.R. & Welders Qualification Tests and witness Destructive tests as per ASME Section IX / 31.3.
* Inspection of Welding, Fabrication, Painting and site installation activities of Heavy Structures and Piping, required for Poly Propylene project as per relevant codes and client specification.Monitor delivery of permanent materials and ensure materials are compliant
* Verify/Review weld parameters of SMAW,TIG,SAW process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS,LTCS,(Sour & Non Sour),SS, Low alloy, materials.
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Control of Repair Welding. Prepare and Submit Inspection Offer Letters to Client/Consultant.
* Making Records & Reports of Fit-Ups, Alignment, Non-Destructive Tests, W.P.S., and P.Q.R. etc.

SUPERVISOR–PIPING,SHAPPOORJI&PALLONJI CO.LTD-India.1993June–1994Sept.(Chemical Plant project,client - Gharda Chemicals Ltd., India.)
Responsibilities: -
* Supervision of Piping (Carbon steel, Stainless steel and Non Metallic),Mechanical and Painting, jobs maintaining required Quality standards as per Project specification and Drawings.
* Monitor delivery of permanent materials &Consumables and ensure materials are compliant and stored properly.
* Liaison with Client, TPI and Consultant. Preparation of Progress Records and Reporting.

SITE SUPERVISOR, WELL FAB Erectors PVT LTD, India.1988Oct–1993March, (Chemical &Petrochemical projects,clients - Gharda Chemicals/Reliance Industries, India)
Responsibilities: -
* Execution of Structural, Piping and Painting jobs-Maintenance -(Carbon steel, Stainless steel and Non Metallic) maintaining required Quality standards as per Relevant Codes, Project specification and Drawings.
* Ensure permanent materials and consumables are compliant and handling according to Project requirements.
* Liaison with Client, TPI and Consultant. Quantity preparation for Billing, maintaining Progress Records and Reporting.

EDUCATIONAL QUALIFICATION
* Graduated from 3 year Engineering college in Mechanical Engineering
PROFESSIONAL CERTIFICATIONS
* CSWIP 3.2 certification as SENIOR WELDING INSPECTOR.
* ASNT Level 3 - Certification in R T. ASNT Level 2 - Certification in U T, M T, P T.
* NACE COATING INSPECTOR Level 1 – Certified
* NQA-UK Certificate of Training (IRCA Registered) in ISO 9001- 2000 QMS AUDITOR.
* ISNT (Indian Society for Non Destructive Testing) Certification as WELDING INSPECTOR.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1490)

Go to Search Parameters...

Brief Description

I have been in the oil and gas industry for the last 24 years. I have been in maintenance as a Supervisor and in Operations as a Supervisor. I am presently an Offshore Installation Manager (OIM)

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Perform repairs on Ford automobiles electical systems, drivetrain, driveability. Extensive training through Ford Motor Company.

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

I have 13 years of experience in,mining and oceanography,i have worked in an institition where i held leading posts and have been able to achieve all the set cooperative startegies in the shortest time as possible

Instrument Engineering, Fire & Gas Engineering

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

The professional profile of a physicist is one of the most varied and extensive. Physicists learn during their studies, strategies for solving problems and issues as quickly and efficiently. Following this training the physicists can work in a universal (almost) any professional area.

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Oil field experience as field engineer, total of 10 plus years, 7 years in Middle East, worked in Kuwait, Oman, Egypt & UAE, Electronics Engineer, good exposure to IT, with driving license of GCC countries.

Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party

Project Engineer

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

As you will see from the enclosed details I am a qualified and highly experienced hands-on Corrosion, Coating and Insulation Professional with + 20 years extensive onshore and offshore experience within the construction, oil & gas and petrochemical industries in both the Netherlands and abroad.

Well experienced mechanic worked on wide range of plant with good references have documents ready for work permit should you be interested let me send you my cv in browse format

Mechanical Technician for oil and gas rotating equipment Electro Mechanic Technician for Domestic and Industrial HVAC Equipment.,NDT UTI and MTI LEVEL – II (Welding non destructive testing),

Apprenticed rigger with vast skills gained over 28 years,qualifications = resin socketing,crane/winch operator deck foreman,lifting gear coding,inspection ,certification.rig mechanic,rigging instructor

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

I am Professional Logistician (CITT), Certified Purchaser, Journeyman H/D-Parts Technician and Warehouseman. I live and work in Fort McMurray (Warehouse Supervisor for Nexen Canada at Long Lake Project ($21 million inventory) -20 years of combined material distr.experience

CIPS qualified MSc MBA MCMI graduate, Oracle, negotiations, IT, tendering, software licensing

Diamond driller / Truck driver

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

maintanance,welding,supervisor,fork lift,fabrication,roustabout,

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

I have 8 years extensive Coded Welders experience in Hydr Industry. I also did a Welding Inspectors Course Level 1 in 2007. I do however not have any experience in Off Shore Ind, but I am very eager and willing to learn.

I am working with Gujarat Narmada valley Fertiliser company ltd which is a fertilizer and petrochemical complex and produces Ammonia, Urea, Acetic acid, Formic acid, Weak Nitric acid, Concentrated nitric acid, Ammonium Nitro phosphate, Calcium ammonium Nitrate, Aniline, TDI, Methanol.

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

my resume consists on my career on my trade of electrician. I send this resume to apply the position of rig service electrician.

Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

Electrician - Certified

Welder or Welder Supervisor

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

37 year old man seek an employment or contract off-shore as a roustabout, mechanic, motorman, fitter or welder

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

24 years in oilfiled \ Safety Rep.\ EMT

Experienced Design Engineer

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

I am a licensed Heavy duty mechanic trained and certified in Canada. I have extensive oil field/drilling experience. I am trained in Caterpillar natural gas compression products. I have extensive supervisory experience as well.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out