Resume - I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar de...

Misco Jobs

Resume #45354

CONTACT INFORMATION:
View contact information...

TERTARY EDUCATION
Harare Polytechnic 1999 - 2000
National Certificate In Diesel Plant Fitting April 2000
First aid certificate

HIGHIER EDUCATION
Secondary School Mufakose High 2
1992 - 1995
GCE ' O' Level
Science
English Language
English Literature
Geography
Shona
Metal Work
Mathematics

HIGHER EDUCATION
Harare Polytechnic 1999 - 2000
National Certificate In Diesel Plant Fitting April 2000

WORK EXPERIENCE
Trained with Barzem CAT (formerly ZEMCO) for the intensive four years (1998 – 2001)
Worked in General Machine Assembling, Specialised bays and Mining Field Service:

Machine Maintenance, Installation and Commissioning
Carry planned, preventive, scheduled and condition based plant maintenance procedures
Remove and installation of major components (engines, transmissions and final drives)
Brake overhauling
Assembling of axles and installation of tracks and undercarriage

Complete Rebuild of Machines
Mining
Large wheel loader (CAT 988 and 992C)
Off highway dump trucks (D25D, 769C)(773B(772B coal haulers)
Track type tractors (D4E, D6H,D7H, D8L,D8N,D10N)

Construction
Motor graders, small wheel loaders, excavators (300 family) and backhoe loaders (F and G series)

Agricultural Tractors
Wheel skiders, tractors(Dezzi) and challengers

Hydraulics and Transmissions
Assembling differentials
Assembling transmissions and gear boxes
Assembling hydraulic control valves
Troubleshooting of the drive train, hydraulic system and electronically controlled transmissions
Assembling and troubleshooting Torque Converters
Assembling hydraulic pumps, (gear, vein and piston type pumps)

Engines
Overhauling of caterpillar engines which include:
3114, 3116 Mechanical Unit Injection
3204, 3208, 3304, 3306,3408 and 3412 models
3500 engine family
Fixing truck engines (Kenworth, Freightliner and Oshkosh)
Perking engines (backhoes and wheel excavators)
Setting and adjusting unit fuel injection on industrial engines (that is compressors, drill rigs and generator sets)
Servicing and attending to engines attached to electricity generators (alternators) and stationary engines
Setting and adjusting electronically controlled fuel injection system
Dynamometer testing of engines to specifications

Fuel pumps and Governors
Complete overhauling of pumps, governors and transfer pumps
Calibration and bench testing of pumps to specifications
Troubleshooting engines on fuel related problems

Engines Accessories
Reconditioning of cylinder heads and pressure testing
Reconditioning turbo-charges, water pumps and air compressors

FIELD SERVICE
Duties:
Service and maintaining a large fleet of mine machines which include:
120G, 130G,140H,14G and 16G motor graders
772 coal haulers
773 dump trucks
928,950,966F,950G,992C wheel loaders
769C water bowsers
325B,330B,350,375LME excavators
Tamrock and Bacyrus Erie Drills powered by Caterpillar engines

Forit Contracting (Pvt) Limited - Civil and Structuring Engineers

Position: Site mechanic (Chirundu) /Field serviceman
Period: January 2002 to October 2003

Duties:
Servicing maintenance and fixing of plant machinery, which includes the following:
CAT 320 and 325B hydraulic excavator
CAT 928G wheel loaders
CAT 140H motor graders
CATD6R and D7R bulldozer
CAT428C backroe loader
375, 399 and 4240 Massey Ferguson tractors
P260D and P260WD Ingersollrand compressors
2 stoke Lister concrete mixers
BW212 D2 and BW212 D3 Bomag compactors
Tex 32P pavement breakers (Atlas Copco)
S20 jack hammer (Boart Longyear)
1012 and 1013 Deurtz engines
Liebher excavators (Asada)

NATIONAL RAILWAYS OF ZIMBABWE
Period: February 2004 to March 2005
Position:Diesel fitter Servicing and Westinghouse sections
Duties:
Servicing and maintenance of DE6 and DE9 locomotives
Overhauling of pneumatic brake valves(Westinghouse 28 LAV 2)
Troubleshooting of locomotives pneumatic brakes.

Current Status: MINING EQUIPMENT SPARES W.A.AUSTRAULIA
Period: August 2005 to Date
Position: Heavy Duty Diesel Fitter
Duties:
Overhauling of engines, torque converters, differentials, and final drives.
Dyno testing of engines to specifications.
Rebuilts to earthmoving equipment.

HOBBIES
Playing tennis, scouting, reading books, First Aid

REPONSIBILITIES HELD
Helped to manage school tuckshop - 1995
Scout Patrol Leader - 1994 - 1995
Scout Secretary - 1995

Assisting 1st and 2nd year Apprentices 2000 - 2001 at BARZEM

REFEREES
Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 1351)

Go to Search Parameters...

Brief Description

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

londery worker ,waiter & data feeding

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.

Managementskills NQF level 6,NQF level 4, operationalskills NQF level6,Facilitationskills,trainingskills,computerskills

MBA in marketing with 4 yrs experience

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

Automation Engineer

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

Logistics, Technology, Transport and Management Professional

I have Masters Degree in Geology with experience in Coal Exploration.

Fitter and Machanist, Rigger, Dogman, JLG, Welding coded, Mining exp (Awarded Apprentice)

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

4.5 years in petro-chem document control: both engineering and construction (Pre-T/A, T/A & Post T/A) phases, being responsible for the governing of drawings, drawing lists, invoices, contracts, engineering standards, construction packages, distributions all management levels

Welding/NDT/QA/QC Inspector

I am electrical diploma holder,having ten years experience in variety of field like textile company,power plant and research centre.I desire to settle in Australia for betterment

QA/QC Mech.Engineer near about four years exp. in the field of Pipe Mfg.Company,Pipeline & Piping during project execution, construction, commissioning of m/cs, pipeline and piping & system implement, execution and maintaining related to all quality control and assurance dept.

Medic/Doctor/HSE

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Heavy Equipment Operator

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

Special Skills: Years of experience in cost-cutting, budgeting, planning and projecting, great communication skills, the ability to work well in and under pressure, team player.Other: Excel, Microsoft word, OSHA

Investigation of electrical documents and scheme in refinery & NGL plants. Simulation files checking in basic & detail design phases.

Profoundly talented and skillful UT/welding Inspector with over ten years experience in field of Quality control and inspection of light and heavy fabrication for refinery, oil and gas transmission line and onshore/offshore steel structure.

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

HEAVY EQUIPMENT OPERATOR

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

QA/QC Inspector experiences both on client and contractor side, ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client, pre commissioning and commissioning of the systems, acquainted with the international codes and

Mining & construction Equipment, Oil field production, Power generation

I studied Geological Engineering, Mineral Resources Engineering and Computer operations. Excellent Oral and Written Communication Skills

Over 12 years experience as an apprentice, technician, service engineer and senior service engineer, of Home Appliances also as a sales executive, procurement of spares both locally and overseas.

Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor,

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.

API 653 experience in corrosion engineering, Inspection,engineering consultancy and RBI techniques. Specific experience in Hi end inspection skills, storage tanks and pipeline inspection. Acoustic emission and Guided wave trained.Overseas experienced

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

Construction Safety Manager

27 years of mechanical and process engineering

Electrical / mechanical service tech

Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia

Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure.

Man of many trades

I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.

6 Years experience in PVT oil and condensate sampling, analysis, simulation, calculation, interpretation, flow assurance and EOR studies, Extensive field and laboratory experience; operations and supervisory.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out