Resume - Sir,I have about 18 years of experience in operation of various Chemical plants,...

Misco Jobs

Resume #47181

CONTACT INFORMATION:
View contact information...

JOB OBJECTIVE Control Room Operator/Senior Production Operator/ Production Operator

TOTAL EXPERIENCE 18 Years
India: 7 years Abroad: 11years

EDUCATIONAL QUALIFICATION
N.C.T.V.T. Certificate Course on Plant operations, Ministry of Labour,
Govt of India. (3 years - in Grade I)

TECHNICAL COURSES ATTENDED
First Aid, H2S Permit, Work Permit (Hot/Cold) Course, Gas Testing, Confined Vessel Entry Course. Basic Sea Survival training.
Shell Nigeria On Job Trainer Course.

OTHER INFORMATION
L.M.V. Indian Driving License available.
International Driving License Available
Working knowledge of Computers like MS office 97
Commissioning Experience Of FPSO.

SALARY EXPECTED: NEGOTIABLE

WORK EXPERIENCE:
1. Production Operator / Production Field Supervisor (Well Head) Total Fina Elf Iran
June 2005 To Feb 2006
Responsibilities As Production Supervisors Are:
a) Involving in the commissioning of Oil, Gas and Water Injection wells b) Co-ordinating with the rig activities like SIMOPS (Simultaneous Operation), Preparing Daily reports and attending daily production meetings. Co-ordinating with SIMOPS activities of ESD1, PSLL & PSHH test on the wellheads. Co-ordinating with the commissioning of new wells including Flow line Hook-up, perforation, acidizing and clean-up. Training of Local Iranian well head operators.
c) Weekly testing of the safety systems of the well heads.

Since Jan 2005 to June 2005
Responsibilities As Production Operators Where:
a) Involved in the commissioning of the Oil and Gas facilities like Amine treatment Unit, Glycol Gas conditioning unit using TEG, Oil separation and Stabilisation unit producing oil 80000 barrels /day and Gas Compression Unit.
b) Training of local Iranian operators.

2. Production Operator (Offshore)
Adma Opco (Abudhabi U.A.E)
May 2004 to Sept 2004 (Short term commissioning contract)

Responsibilities Are:
a) Coordinating the commissioning activities of Gas Injection Plant Phase 3. Monitoring the process in CSP (collector Separation Plant which is Oil gathering Plant); GG2 (Gas Gathering Plant which is also gas injection plant which has 3 Rolls Royce Avon Gas Turbines and 3 Dresser Rand Gas Compressor injecting 90mmscf gas per day) and GIP (gas injection plant) which take its gas from GG2 and injection it at 5000psi pressure. Gip has 3 Rolls Royce Compressors and injects 100mmscf gas per day). Also have to do coverage in Water Injection Plant injecting water to water wells at 3500psi pressure using the DCS (distributed control System) of Bailey.

b) Reporting of abnormalities to the Superiors. Training of the local Operators.
Co-ordinating with permit to work activities of the plant such as mechanical, electrical and instrumentation jobs in the plant.

3. Control Room Operator (Offshore)
Shell Petroleum Development Company (Nigeria)
From May 2001 to Jan 2003

Responsibilities Are:
a) Commissioning and Monitoring of the oil gathering Station and Associated Gas Plant (For Flare Reduction Project) using the DCS system of FOXBORO I.A.
b) Commissioning and Monitoring the Equipments such as the Gas Compressors and Power generators and turbines (Nuovo Pignone) using the DCS system.
c) Training of the Nigerian Operator trainees

4. Process Operator (Offshore)
Ras Laffan L.N.G. Company (State Of Qatar)
From September1998 to July 2000

Responsibilities Are:
a) As process operator monitoring of gas production from Well heads (Gas wells).
Monitoring Glycol Dehydrating system using D.C.S (FOXBORO I.A.).Monitoring the Operation of Typhoon Gas Turbine Generator Sets.
Logging production data and reporting any abnormalities to the production supervisor. Coordinating with Mechanical, Instrumentation, Electrical, Well services and Safety departments for day-to-day plant activities.

5. Production Operator/ Well Head Operator

A) Petroleum Development Oman, (Shell), Oman.
September 1993 to April 1994, June 1995 to November 1995.
b) Al Furrat Petroleum Company (Shell Petroleum Co.) Syria,
Jan 1996 to Dec 1996.
c) Petroleum Development Oman, (Shell), Oman.
From March 1997 to Jan 1998.

Responsibilities Are:
a) As Production Operator in Oil gathering stations operating the facility which includes Well Heads, Gas Lift, Water injection, Oil Gathering Stations, PIG Launching / Retrieving, Glycol Dehydration, Propane Chilling, NGL Recovery and Gas Sweating (SULPHEROX) and LNG Plants.
b) Monitoring of crude oil production by maintaining the required station backpressure.
c) Monitoring the gas lift to the individual injection well.
d) Monitoring of water injection to individual water injection wells using the latest SCADA technology and RTUs.
e) Testing of individual oil wells using Daniel Senior orifices for oil, BSW periodically and reporting of abnormalities in production to the supervisor and preparing test sheets for the wells being tested. Also testing of Oil wells using the Multi Component flow meters.
f) Periodic monitoring of Chemical injections like corrosion inhibitor injections, Demulsifier injection & scale inhibitor injections.
g) Periodic monitoring of individual well heads for abnormalities and well output.
h) Checking the annulus pressure of individual wells for communication between annulus for the casing.
Monitoring the well head safety conditions and coordinating with the wire line crew for jobs such as flowing gradient survey using Amerada, static survey, build-up survey, acid stimulation job, well kill job, Gauge Cutter Runs, Well Unloading etc., i) Monitoring safety of the plant and the safety of the hot work / cold work job going on in the plant and logging of plant conditions. Also handled Hot Tapping jobs.
Well versed in Oil and Gas separation process and testing of individual well production using latest D.C.S. of TDC 3000 of Honeywell, U.S.A.
Well versed with Solar Centaur, Ruston TB5000 and Rolls Royce Avon Gas Turbines.
Handled multi-stage gas compressor (Nuovo Pignone) having capacity of 62500 NM3/hour and also handled DEMAG Booster Compressors and Dresser Centrifugal Compressors, Multi stage Babcock Borsig Centrifugal compressors and also related equipment's such as gas scrubbers and Fin-Fan coolers.
Handled emergency and normal start-up and Shutdown activities of the oil gathering Stations.
Preparing daily production reports on PC and reporting to the supervisor concern.
Training of Local operators and trainees.

6. Plant Operator
Saudi Iron And Steel (Hadeed, Al-Jubail).
March 1992 to June 1993

Responsibilities Are:
a) Worked as Plant operator in-plant for producing iron from iron oxide by reduction using carbon monoxide and hydrogen.

b) Worked in Natural Gas Pre-treatment plants.

c) Well versed with reforming process and Shaft furnace.

d) Well versed with Control systems TDC-3000 of Honeywell, U.S.A.

e) Well versed with Cryogenic distillation of Methane.

f) Handled the shut down and start up activities in the plant.

g) Training of local trainee operators.

7. Distillation Operator - Grade A
Reverse Osmosis Desalination Plant
Ministry Of Works, Power And Water, State Of Baharain.
August 1989 to August 1991.

Responsibilities Included:
a) Keeping the plant in proper running condition.
b) Monitoring equipment's such as heavy duty submersible centrifugal pumps (capacity 6000 cubic meters per hour); Dual media filters controlled by P.L.Cs (programmable logic controllers); timely logging of plant conditions; controlling the plant parameters such as pressure, flow etc. Using modern Digital Control Systems (CENTUM of YOKOGAWA, Japan)
c) Reporting of any abnormalities of the plant equipment's and process to the foreman concerned.
d) Cleaning the permeater membrane chemically according to laboratory requirements and specifications, using chemicals like sodium sulphate, citric acid, ammonia, detergents, tannic acid and formalin.
e) Re-coating the inner membrane parts to give better output.
The total output was 10 million gallons per day)
Lubrication of equipment's.
f) Training of local operators.

8. Process Technician
Bharat Petroleum Corporation Ltd., Refinery Division,
Bombay, India. (Former SHELL Refineries)
August 1982 to August 1989
Worked as a trainee operator from August 1982 to August 1985. On completion of the training period and successful completion of the N.C.T.V.T. examination conducted by the Govt. Of India was confirmed as Process Technician (Refining Division).

Responsibilities Included:
Worked as Process Technician at the aromatics unit of the refinery, which manufactures Benzene and Toluene using Naphtha as raw material. The Benzene output was 85000 MT per year and Toluene output was 17500 MT per year.
Performed assignments in various units of the Oil Refinery such as:

a) Crude Distillation Units having processing capacity of 20000 tones of crude per day. The Crudes include Bombay High crude, Iranian heavy and light and Middle East Crudes like Royal Saudi Crudes. The products of CDU are L.P.G., Wild and treated Gasoline, High-Speed Diesel oil, LDO (Light Diesel Oil), Kerosene and Aviation Turbine fuel.
b) Vacuum Distillation units producing Waxy distillates for Cracking unit.
c) Bitumen Blowing Unit producing Bitumen.
d) Catalytic Cracking Unit using Silica Alumina as Catalyst producing L.P.G, Light Cycle Oil, and Heavy Cycle oil clarified oil and high Octane Gasoline as end products.
e) Sulphur Recovery units to recover H2S from Refinery off-Gases by using Claus process.
f) Platinum Reforming Unit used for producing higher Octane Gasoline.
g) Tank age and Blending Units for dispatching the products such as Gasoline, Diesel (H.S.D.), L.D.O, ATF and LPG.
h) Utilities section including Demineralising plant and Water softening plant, Boilers (BABCOCK and WILCOX make and Cross Tube Marine Type), cooling water system using Turbo set pumps.
Handled the Refinery equipment's like pumps of Centrifugal types and Reciprocating types (positive displacement types) Absorbers, Separators, Air drying units, Reboilers, Distillation columns, Vaporizers, Heaters or Furnaces, Coaelcers, Thomassen Gas Compressors, Atlas Copco Air Compressor and Steam Turbines. Experienced in Plant monitoring using Distributed Control Systems of CENTUM of YOKOGAWA Japan, HONEYWELL, USA (TDC 3000) and FOXBORO, USA.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 1336)

Go to Search Parameters...

Brief Description

Drafter

Performing the day-to-day maintenance activities of the oil and gas plants in coordination with DCS Technicians and Sr technicians.

Programming VB6, ASP,COBOL,Oracle,MS SQL server,MS Access, Lotus Notes R5,

Senior Process Operator

Well site supervisor with southeastern New Mexico/West Texas drilling experience. Experienced with PDC bits, High pressure, Drilling with brine and weighted mud, Lost circulation/ seepage issues, Have current well control card. I am a safety leader and apply my knowledge to every task.

Sales, Engineering Project Manager

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

I have 25+ years experience in the Instrumentation/Electrical field in construstion and maintenance

AWS Certified Welding Inspector

Sir,I have about 18 years of experience in operation of various Chemical plants, oil refineries and oil and gas gathering stations in India and Arabian Gulf Onshore and Offshore. I am also having experience of operation on Modern DCS belonging to HONEY WELL TDC 3000 of USA, CENTUM of YOKO GAWA

I have more than 5 year of experience under valve manufacturing company.I worked with gate, globe, ball, NRV valves mostly with forged steel, cast steel, and stainless steel. But I have a experience of manual valve only.

Very strong experiance in the international business, export, business development, project handling, managment skilles, computer skilles, problem solving

My qualifications are reinforced by over 20 years as a front line supervisor in the construction, rejuvenation, revamp of Oil and Gas, Petrochemical and Nuclear Power Plant Projects specifically in the field of Insulation Works.

Ability to identify the client’s needs, to provide an intervention of quality, to encourage human development and to train junior consultants. The developement of my communication and natural leadership skills help me to innovate and to implement new ideas.

Emergency Response Manager Trainer and Health & Safety professional: NEBOSH, Tech IOSH (NASP) Certified Safety Auditor, Certified Health & Environmental Management Specialist 2005/2006 and other technician certificates. 12 + Years HSE experience, 30 + years overall experi

Twenty two years of hands on electrical construction, Ten years commissioning start-up supervision & QA/QC

I have been in the oil and gas industry for the last 24 years. I have been in maintenance as a Supervisor and in Operations as a Supervisor. I am presently an Offshore Installation Manager (OIM)

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

I have 19 yrs heavy construction as an ironworker/rigger been through numerous rigging classes including a master rigger class fromwire rope&rigging consultons out of washington state. when i get a job i am dedicated and give 110%all the time. I also like physical wor k

Perform repairs on Ford automobiles electical systems, drivetrain, driveability. Extensive training through Ford Motor Company.

Free! A multi disiplined Construction Superintendent with a proven track record of completing difficult projects to the satisfaction of Client and Contractors on time, often in harsh and demanding environments.

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

AWS-CWI 30 years in the Welding Field - Pipeline, Fabrication, Piping/Structural - Onshore and Offshore - Domestic and International

Oil field experience as field engineer, total of 10 plus years, 7 years in Middle East, worked in Kuwait, Oman, Egypt & UAE, Electronics Engineer, good exposure to IT, with driving license of GCC countries.

Maintenance Supervisor\HVAC Mechanic\Controls Technician

Manage 20 maintenance personel on repair of equipment and building ,order arts and maintain inventory, prioritize and issue work orders.

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Timed served Diesel mechanic with three years post trade experence. Specialising in heavy earth moving equipment.

Well experienced mechanic worked on wide range of plant with good references have documents ready for work permit should you be interested let me send you my cv in browse format

CIPS qualified MSc MBA MCMI graduate, Oracle, negotiations, IT, tendering, software licensing

Project Management / Inspection / Procurement / Quality Assurance

Looking for a postion in Service/Operations management based in the Baltimore area. Excellent platform and presentation skills.

Service and maintenance of various heavy equipment

Journeyman Electrician Red Seal Endorsement

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Heavy Equipment / Crane Mechanic / Welder

SCR senior electrician.

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

my resume consists on my career on my trade of electrician. I send this resume to apply the position of rig service electrician.

Experianced and competant in seismic acquisition and interpretation

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

Working as HSE Mngr. /Eng. /Supervisor postions in RoK and Ex-Soviet Republics, on both oil field and construction HSE managment and supervision for multi-national companies, BSc Civil Engineering and 10 years civil engineering background,reside in RoK, holder of Residence and Work permit for RoK

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Scaffolder/Dogman/Rigger: slinging loads, inspecting slings, chains, chain blocks, come-alongs and harnesses. Help directing cranes using hand signals as well as constructing scaffold to maximal safety standards and deconstructing scaffolds.

Electrician - Certified

Industrial Electrician by trade who is now working as a Commissioning Operations Maintainer in Explosives and LNG facilities.

Supervised main LNG works from Administration and Utility Area

A qualified engineer with an exceptional and extensive track record in managing large maintenance infrastructures systems for diverse industrial setups

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out