Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #54106 next resume »»
CONTACT INFORMATION:
View contact information...

SKILLS SUMMARY
Environmental Engineering and Science Consulting abilities; Wastewater & Water Engineering Consulting; Environmental Characterization/Assessment, Monitoring, Surveys, and Remedial Investigation abilities; Geologic and Remedial System Data Evaluation and Interpretation; Strong Technical Writing Skills and Report Preparation; Effective Analytical and Assessment abilities; Subsurface gold exploration and investigation abilities; Fully Proficient Computer Skills (Word, Excel, Other Software and Applications, Internet, etc); Highly adept in learning new skills/techniques.

PROFESSIONAL EXPERIENCE
2004-Present Senior Geologist, DuPont CRG/URS Corporation; USA
* Involved in managing environmental and remediation liabilities at former DuPont ammunition manufacturing and testing site; Supervised, sampled, and conducted delineation of metals, PAHs, and PCBs impacted sediments/soils at this RCRA Corrective Action site; Low flow groundwater sampling using peristaltic, submersible, and micropurge bladder pumps; Hollow auger stem drilling, soil logging, and collected split spoon samples; soil and groundwater data evaluation and analysis; Prepared technical reports; Supervised EM 61 geophysical surveys and UXO verification activities.
* Performed site characterization for a RCRA industrial facility that also met the definition of an "Establishment" under the CTDEP "Transfer Act." Investigated 22 areas of concern (AOC) for VOCs, metals and ETPH. Also investigated dissolved phase chlorinated solvent plume associated with the interbedded stratified glacial drift deposits and bedrock unit beneath the site and off-site. Also conducted soil gas sampling using SUMMA canisters as per USEPA and ASTM soil gas sampling protocol.
* Provided technical support to waste (Hazardous, Regulated, Universal, etc.) management team. Responsibilities included record keeping, inspection of storage containers and areas, coordinating waste removal for off-site disposal.
* Completed site characterization and remediation of lead shot impacted sediments at a former trap and skeet shooting Gun Club located on the Connecticut shore of Long Island Sound. Delineated the vertical and lateral extent of the impact per 1,000 lead shots per cubic meter clean-up criteria that resulted in the excavation and off-site disposal of lead contaminated sediments.

2003-04 Project Geologist, HRP Associates, Inc; USA
* Completed Transaction and Preliminary Environmental Site Screenings, Phase I Environmental Site Assessments (ESAs) and Phase II/III Subsurface Investigations and Remediation in accordance with ASTM standards and the Connecticut "Transfer Act" to evaluate the potential for contamination of site soil, ground water and surface water resulting from site operations, use and conditions. Conducted soil and groundwater investigation of sites impacted with petroleum hydrocarbons, heavy metals, and pesticides releases from leaking underground storage tanks (LUSTs), illegal & historic landfills, and historic pesticide use at orchards& agricultural farm lands, respectively.
* Installed test pits, test borings, and overburden monitoring wells. Described subsurface materials. Collected and sampled soil and groundwater to determine degree of contamination.
* Performed soil and groundwater data evaluation to delineate contaminated areas; Performed ground water monitoring to achieve compliance and post-remediation objectives as per applicable regulations; Prepared technical reports and proposals; Corresponded with clients, subcontractors, and regulatory agencies.

2000-02 Environmental Engineer, Groundwater & Environmental Services; USA
* Supervised operation and maintenance of soil and groundwater remedial systems at 14 Exxon Mobil hydrocarbon impacted gas stations; Performed remedial system design, installation, evaluation, and performance optimization; Conducted Total Phase Recovery using vacuum trucks, GAC change-outs, and supervised remediation system trench construction; Prepared work orders, tracked systems, and calculated mass removal rates. Also performed product (LNAPL) bail-down test, and planned boring locations.
* Evaluated and selected innovative remedial alternatives for hydrocarbon impacted soil and groundwater; Prepared technical and engineering reports (RAP/CAP, RIP, I&M, and DMR); Reviewed and evaluated Public water supply systems feasibility reports; Conceptually planned and designed public water supply system.
* Conducted and wrote Transaction Screen and Phase I ESA reports in accordance with ASTM Standard E 1528-00 and E 1527-00, respectively for undeveloped, residential, and commercial properties; Conducted Phase II & III ESA projects; Supervised field contractors for ORC® injection using a Geoprobe rig to bioremediate a No. 2 fuel oil impacted site; Gauged, purged, and sampled groundwater monitoring wells. Prepared groundwater contour maps.

1998-00 Masters/Research Fellow/Intern, Lenox Institute of Water Technology; USA
* Developed conceptual plans and design for water and wastewater treatment plants.
* Completed wastewater/water research and laboratory treatability studies.
* Translated treatability data into design parameters and sized distribution equipments and piping.

1994-98 Geologist, Battle Mountain Gold Limited; Ghana
* Coordinated and implemented environmental guidelines for gold exploration program.
* Performed and planned subsurface investigation activities for gold exploration; Planned trench and drill holes locations based on geo-chemical and –physical (EM, VLF) anomalies and supervised borings/drill holes installations using a variety of drilling technologies to determine the persistence of auriferous zones with depth; Sampled and logged drill core; Interpreted complex subsurface geology, structural geology, stratigraphy, and cross-sections of borings to verify the significance of structural control on auriferous zones and utilized a variety of software programs for analyzing and presenting data; Conducted preliminary field reconnaissance that included geological mapping, stream sediment, soil, rock, and trench channel sampling and logging; Prepared technical reports.

EDUCATION
M.Eng. Water & Wastewater Engineering, Lenox Institute of Water Technology, Lenox, Massachusetts, 2000 (Thesis: Ammonia Nitrogen Removal and Recovery from Industrial and Municipal Wastewaters by Chemical Precipitation and Clarification-Sedimentation/Dissolved Air Flotation)
B.Sc. Geology, University of Ghana, Legon, Ghana, 1993

CERTIFICATION
* OSHA HAZWOPER (40 Hour); OSHA HAZWOPER Site Supervisor Training (8-hour); ArcView® 3.1

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1001 to 1050 of 1345)Go to Search Parameters...
Brief Description
Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)
Heavy Equipment Operator
Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.
Environmental Consultant (Engineer/Scientist)/Geoscientist
Special Skills: Years of experience in cost-cutting, budgeting, planning and projecting, great communication skills, the ability to work well in and under pressure, team player.Other: Excel, Microsoft word, OSHA
Investigation of electrical documents and scheme in refinery & NGL plants. Simulation files checking in basic & detail design phases.
Profoundly talented and skillful UT/welding Inspector with over ten years experience in field of Quality control and inspection of light and heavy fabrication for refinery, oil and gas transmission line and onshore/offshore steel structure.
Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.
HEAVY EQUIPMENT OPERATOR
Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.
QA/QC Inspector experiences both on client and contractor side, ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client, pre commissioning and commissioning of the systems, acquainted with the international codes and
Mining & construction Equipment, Oil field production, Power generation
I studied Geological Engineering, Mineral Resources Engineering and Computer operations. Excellent Oral and Written Communication Skills
Over 12 years experience as an apprentice, technician, service engineer and senior service engineer, of Home Appliances also as a sales executive, procurement of spares both locally and overseas.
Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor,
Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.
API 653 experience in corrosion engineering, Inspection,engineering consultancy and RBI techniques. Specific experience in Hi end inspection skills, storage tanks and pipeline inspection. Acoustic emission and Guided wave trained.Overseas experienced
A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.
29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)
Construction Safety Manager
27 years of mechanical and process engineering
Electrical / mechanical service tech
Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia
Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure.
Man of many trades
A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player
I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.
6 Years experience in PVT oil and condensate sampling, analysis, simulation, calculation, interpretation, flow assurance and EOR studies, Extensive field and laboratory experience; operations and supervisory.
Mechanical Supervisor / Project Manager
Fire, Emergency Services, Trainer/Instructor, OPITO, NEBOSH
911 Paramedic with 10+ years in emergency medicine to include former Army EFMB medic and USAF medical technician.
Ex Firefighter 18 years, Breathing Apparatus, Confined Spaces, Fully Qualified Pllease view my CV
I&C ENGINEER - 9 years experience. Control Valves, flowmeters, shutdown systems, proximity sensors, and PLC programming. Oil Production, Refineries, Power Plants.
17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.
International Trade such as Import & Export Business, Offers, Sales Promotion, Market Research, Different Business Reports / Information's, Estimations and Future Business Plans beside some Administrative Work etc
More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).
I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme
Excellent Pro-E skills for product and mechanical design in lean manufacturing
CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.
Scaffolding supervisor, 12 years experience in oil and gas projects, international experience, 200+ staff on last project, teaching to locals experience
Projects Management / Technology Consultant / Business Development & Management of Information Systems
I'm a Strategic Marketer for Oil Pipe line for Baosteel Iron and Steel in Indonesia, and currently trying to flap my wings abroad for experience and better salary
Specialist in Security, Safety and Risk management
Detailed experience within the Barnett Shale, including title research, abstracting, lease composition, surface and mineral acquisition.
My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations supervisor or as an inspector. I have over 25 years experience in the natural gas transmission and distribution pipeline industry.
Female post graduate, MCA,seeking suitable post in kuwait ,having knowledge in vb, vb.net, java, c, c++, sql sever, access, html.
Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process
Im a highly qualified Gas turbine operator/ I have worked on Construction/Commissioning/Operation Of Alstom GT13E2, TM 2500,GE Frame 9,6, and Solar Gas Turbines
Free! Instrument Technician currently employed overseas in Far East Russia and interested in future overseas or camp employment when current contract is over in December/08.
8 Years extensive experience in QA/QC inc: India and overseas.
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   [ 21 ]   22   23   24   25   26   27  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com