Resume - Proficient in managing reciprocating and rotating equipment maintenance, supervi...

Misco Jobs

Resume #5498

CONTACT INFORMATION:
View contact information...

Professional History

ConocoPhillips Indonesia
(February 1997 - Present)

Senior Maintenance Superintendent

Plan, organize and supervise the administration of maintenance for Company's onshore facilities and equipment in compliance with Company's safety and environmental policies and procedures, prepare budget and ensure cost control for all maintenance related activities, review and approve procurement of parts and services.

Gulf Indonesia Resources Ltd
(February 1995 - February 1997)

Field Maintenance Superintendent

Plan, organize and supervise the mechanical maintenance of Company's onshore production equipment in compliance with Company's safety and environmental policies and procedures, prepare budget and ensure cost control for maintenance section related activities, coordinate with procurement/warehousing on purchasing of materials required to ensure their availability.

Asamera Oil
(February 1993 - February 1995)

Compressor Maintenance Superintendent

Plan, organize and supervise the mechanical maintenance of Company's onshore gas engine-compressors and turbines and auxiliary equipment, coordinate with procurement/warehousing on purchasing of materials required to ensure their availability.

Technical Representatives Limited
(February 1991 - February 1993)

Gas Compressor Maintenance & Training Consultant

Set up, implement and supervise the preventative maintenance of Asamera Oil's gas engine-compressors and turbines and auxiliary equipment, provide ongoing on-job training for Asamera Oil maintenance and operating personnel.

Cooper Energy Services International Inc
May 1980 - February 1991)

Senior Field Service Engineer

Installation, commissioning, overhaul and troubleshooting of Company line reciprocating gas engine compressors including Cooper-Bessemer, Superior, Ajax, Penn Pump and Nordberg. Assisting and standing in for the Service Manager, responding to customer inquiries and providing technical support.

Middle East Engineering Limited (GE)
November 1978 - April 1980)

Mechanical Supervisor

Supervising overhaul and updating of Ingersoll Rand gas engine compressors. Carry out repairs to General Electric gas and steam turbines.

Middle East Navigation Aids
(February 1977 – November 1978)

Third Engineer

In charge of ship's engine room watch, including operating and maintaining 1500HP steam reciprocating engine, boilers, desalination plant and auxiliary equipment.

Silver Line Limited
(October 1973 – January 1977)

Third/Fourth Engineer

In charge of ship's engine room watch, including operating and maintaining 36,000HP Stal Laval steam turbines, boilers, turbine and diesel (2000BHP) generator sets, centrifugal pumps, desalination plants, compressors, pneumatic and hydraulic control systems, steam turbine pumping systems and auxiliary equipment.

Shell Tankers (U.K.) Limited
February 1972 – September 1973)

Fourth/Fifth Engineer

Assistant to and in charge of ship's engine room watch, including operating and maintaining 35,000HP Mitsubishi, 7,500HP General Electric and AEG steam turbines, boilers, turbine and diesel generator sets, centrifugal pumps, desalination plants, compressors, pneumatic and hydraulic control systems, steam turbine pumping systems and auxiliary equipment.

Easton & Johnson's Limited
(August 1966 – January 1972)

Apprenticed and skilled Mechanical Fitter

Five-year apprenticeship including one-year full time attendance at technical college followed by four years weekly day release. Erection and assembly, marking out of heavy paper making machinery and land drilling rigs.

Supplementary

Experienced working in the following countries: Australia, Bahrain, China, Holland, India, Indonesia, Japan, Malaysia, New Zealand, Pakistan, Philippines, Singapore, Taiwan and Thailand.

Personal Details

DOB 16th November 1951

Nat. British

Status Married

Ed. Huish's Grammar School
Taunton Technical College
City & Guilds Mechanical Engineering Studies

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1338)

Go to Search Parameters...

Brief Description

I am currently seeking employment internationally preferably on a rotational basis

To join an organization where management skills and experience can be exercised to provide leadership in the areas of design, construction and plant maintenance utilizing my training and 25 years of experience to improve the firm's long term viability as a successful business concern.

Proficient in managing reciprocating and rotating equipment maintenance, supervising general servicing, overhaul, installation, commissioning and troubleshooting of this equipment, ability to set up and operate CMMS programs

I have over 20 years experience as a Welder/Fitter. The majority of my experience is in the Oil & Gas Industry. I am willing to relocate and/or travel.

25+ years in the pharmaceutical, chemical and petroleum industries as an instrumentation technician. Willing to travel.

I am experience Electrical Instructor who has worked for most of the major Oil and Gas companies. I have experience as both a classroom, On the job trainer and NVQ Assessor. My work experience covers the following areas Middle East, Far East and Africa.

Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Experienced Instrument and Control Technician, with more than 20-year hands-on work experience. My experience covers working for Petroleum Refineries, Petrochemical facilities and Offshore oil/gas production facilities.

Offshore Operations, Safety, Accommodation Refurbishments, Inspections

Wellsite Supervisor, Lead Operator

Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa.

For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas

25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections

Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal

ONSHORE-20 Years. Set-up and supervise Mechanical Operations & Maintenance duties. OFFSHORE PLATFORM-4 years. Oil & Gas offshore Platforms Maintenance instruction to Maintenance staff. Identify and control all replacement spares and equipment of all offshore plant and equipment.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

I have been employed in the oil and gas industry for over 20 years, 12 overseas. Supplemented by formal training, my career has enabled me to develop expertise in a wide variety of mechanical, technical, and organizational staff and work management areas.

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field.

I'm a USN Veteran Electrician with a solid background of electronics. I'm a self starter, and I have been working for myself on/off during the last year as a contract labor electrician. At this time I'm working for myself doing electrical jobs for Coastal Drilling in Corpus Christi, Texas.

A Technical personnel willing to relocate and learn and be involved in a new working environment. Can perform PC and LAN troubleshooting, installation, maintenance and configuration.

Senior directional driller

Heavy Earthmoving Equipment Mechanic

Total 7 years experience in the oil and gas field(2 years gulf exp) .and have good experience in field analyzers including gas chromato graphs ,field instruments and fire &gas detection instruments. able to work independently in hook up, pre commisioning,commissioning and Maintenance of above ins

I want to work as Instrument Foreman/ Technician with good knowledge and experience in Process Instrumentation in Power plant and Desalination Plants.

Maintenance, troubleshooting, and repairs @ plants, boosters, etc.

My qualifications appear to be in line with your requirements: - Over fourteen years of successful experience - Extensive experience with PDS, Plant view, Micro station and AutoCAD software - Strong background as a Lead and Senior Designer

14 years Oil & Gas Industry experience in electrical maintenance, Low Voltage and High Voltage, normal and hazardous areas, on-shore and off-shore, grounding systems, UPS´s , PLC´s, engines ignition systems, heat tracing, HVAC. General acknowledge in Process and Instrumentation.

Have substantial supervisory experience in the maintenance of Heavy equipment, work well with in a team. My leadership skills are excellent and I have very good communication skills. Computer literacy is very proficient.

* 25+ YEARS EXPERIENCE IN THE OIL & GAS INDUSTRY * PAST MANAGMENT POSITIONS * CERTIFIED INSTRUCTOR OF VARIOUS SAFETY COURSES

Drill Stem Testing, Downhole Tool Supervision, Packers, Open-hole, Cased-hole, Driller, 4-Point Testing, Heavy Industrial Manufacturing, Computers, etc. These are just some of the areas in which I have a solid background in.

I am a Journeyman Heavy Duty Mechanic with supervisory experience. I am looking for overseas employment preferably contract work. I have some computer skills which include MS word, excel, access. I have developed and implemented preventive maintenance programs which proved very successful.

Extensive Oilfield knowledge and experience in all categories of more than 20 years. Worked offshore for the last 15 years as a crane operator but am not limited to that.

I`m seeking employment overseas and have extensive experience as a Heavy Duty Mechanic.

Certified ASME welder, First Aid and CPR. Military veteran. In-depth experience with supervision and management. Experienced with heavy machinery, vehicles, electrics, hydraulics, plumbing, fabrication, offshore welder on a jack-up ship, shipfitter, hardware retail and laundry machine repair.

I have received recognition for my personal work Ethics and I work well with people. I'm looking for employment in the Diving industry or Offshore Drilling Rigs. I believe I have good broad range of skills that may of value to an Employer.

Available 7/7 days as I'm single. Free like a bird. Highly self-motivated, open minded, easy communication with people, dynamic, patient, courageous, sense of initiavtive, responsible, and persistent.

24 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment Specialist, in both Gas Compression and Liquids Sh

Accomplished boilermaker/welder. My recent jobs have included high pressure pipe welding, building one gigawatt wind field towers, new ski lifts and towers, in addition to retrofitting older ones.

Highly motivated candidate with geochemistry background, looking for first job in industry. Excellent computer and communication skills.

Engineering graduate with MBA having about 2 decades of experience in developing and administering Contracts in Oil& Gas, Petrochemical and Engineering fields. Skills include Strategy development, Risk analysis, develop Contract documents, Evaluation/negotiation and award, Contract management.

MBA Finance, Basicaly technically minded person having all rounder capbilities

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

Crane Operator / Deck foreman Rigger

Hold mater unlimited license 3000 GT. Certified rig move master by John Lebhourihis and associates.Offshore experience 19.5 years on 3 independent jack ups as barge captain.Experienced in ship's hull and preload tanks steel repairs

Re: Application for Employment as a Roustabout/ Roughneck I am willing to start at the bottom and work my way up within your organisation. I am prepared to work anywhere in the world.

10 Plus years in the United state Military as a pertoleum Supplier/NCO

Industrial, commercial electrician. Licensed Master Electrician - Colorado Licensed Journeyman Electrician - Alaska

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out