Resume - Skills are; mechanic, HVAC, heavy equipment etc.

Misco Jobs

Resume #56831

CONTACT INFORMATION:
View contact information...

* Career Objective: To secure a position as a diesel mechanic, service technician, heavy equipment mechanic, or hydraulics mechanic.

* To acquire position as master mechanic or supervising foreman mechanic

* Past job responsibilities: Repairs on heavy equipment, bulldozer, frontend loaders, forklifts, trac hoes, 18 wheel trucks and oversee the running of a shop with all the responsibilities there in; data entry for reports, ordering of all parts, maintained all inventory. Maintained all service vehicles and reports there in.

* Work History

* Lear Siegler Services Inc.
* Located in Iraq
* D2 Baghdad

* Maintained all military vehicles, including Hummers, Jeeps and any vehicle required for our military for transport.
* Repaired and maintained Bradley tanks and all other tanks
* Repaired and replaced all gauges, wiring, fluid hoses, oil, filters, tracks on tanks, hydraulics.
* Checked and maintained emissions on all said vehicles,
* Repaired and maintained a/c systems.
* Replaced windshields, side window interior parts
* Rebuilt engines for hummers, trucks, and jeeps.
* Replaced needed parts on tanks.
* Maintained brakes and fluids, master cylinders,
* Calipers, brake lines
* Steering columns, transmissions,
* Greased all under carriages of vehicles
* October 2006- Present

* Flo CO2
* Maintained all diesel trucks; change oil, filters lines.
* Changed fuel and air filters
* Changed all brakes and drums
* Repaired and changed tires
* Maintaince on the engine and transmission
* Charged A/C system
* Ordered all parts
* Maintained all inventory and reports there of
* Rebuild diesel or gas engines
* Repaired and replaced pumps on pump tanker trucks
* Welding of truck frames
* Carthage TX.
* September 2005 – October 2006

* Letourneau
* Assembled diesel engines for offshore drilling rigs.
* Built Hydraulic pumps for offshore drilling rigs
* Assembled engines for extreme bulldozers, frontend loaders, forklifts etc.
* Longview, TX July 2005 - September 2005

* Sandhill Foundation LLC.
* Maintained diesel 18 wheelers and trailers, changed all fluids, and filters
* Changed brakes and drums, tires and wheels
* Repaired bulldozers, trac hoes, frontend loaders
* Welded all trucks, trailers, and equipment for repairs
* Ordered parts that was needed
* Ran diagnostics on all equipment
* Maintained A/C system
* Rewired dash instruments and gauges
* Tenaha, TX
* June 2005 -July 2005

* Courtney Construction

* Field Service Technician
* Maintained up keep and repairs on all heavy equipment; bull dozers front-end loaders, trac hoes forklifts.
* Changed teeth on trac hoes, cleaned and changed tracs, greased all fittings, changed oil and filters. changed and repaired lines as needed.
* Changed hydraulics and fluids as needed
* Maintained DOT requirements for all equipment
* Charged A/c systems. changed evaporators as needed.
* Repaired trac arms and replaced o-rings
* Performed diagnostics on all equipment and service vehicles
* Ran and understood all codes of diagnostics
* Changed brakes and drums, tires and wheels
* Carthage, TX
* February 2005 - June 2005

* Pierce Construction
* Shop Mechanic
* Maintained all service vehicles
* Maintained and repaired all 18 wheel trucks and trailers
* Changed tires, brakes, drums brake lines
* Welded trailers for repairs
* Rebuilt engines, gas or diesel
* Changed hydraulics and fluids
* Change oil and filters
* Changed fuel lines, tanks, filters
* Performed trouble shooting procedures
* Ran diagnostics
* Rewire dash guages, steeringcolumns
* Replaced belts, batteries
* Checked brake calipers with micrometer
* Recognizing defective parts
* Listen and detect problem by sound of engine running
* Ordered all parts
* Data Entry on maintaince reports of all equipment and vehicles
* Maintained inventory
* Beckville, TX
* April 2004 - February 2005

* Education:
* High School - 1984
* Henderson, TX

* Experience:
* 25 years mechanic and field service experience on heavy equipment; bulldozers, frontend loaders, trac hoes, for lifts.
* Service vehicles, and 18 wheel trucks and trailers.
* Diesel or gas engines, transmission service, hydraulics, electrical systems, hydrostats, diagnostics, a/c systems, welding, cutting metal, muffler and exhaust emissions, and sheet metal experience.

* References upon request.

* Note:
* Any other experience can be made available s needed.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1466)

Go to Search Parameters...

Brief Description

Installation of electrical and instrument equipment, commissioning and pre start up, layout plc panel and install plc parts, wiring of motor controls in mcc, and construction works.

Sales/Marketing business Development Manager with technical exposure and hands on in Well Testing, Down hole Testing and production facilities.

Computer and management skills, mechanic supervisor, diesel performence and diagnosis, inventory quality and control, have worked in middle east and Africa.

Storeman, Expediter, Roustabout, Clerk

Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.

Pipe Welder+Metal Fabricator+Iron Worker

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

Boilermaker for 15 years petro and power

Professional Heavy Duty Mechanic with leadeship and overseas experience seeks full-time or contract position with a well respected organization anywhere in the world.

19 years of welding experience, oil and gas fabrication. superintendent, engineer, inspector.

High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE.

With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Driller/Directional Driller experience, looking for either, and will travel anywhere.

Senior Directional Driller Offshore/Land Domestic International 25+years

I am a mechanical engineer and I have been in the OIL & GAS DRILLING profession for past five years as rig mechanic, who is engaged in repair and maintenance of RIG equipments. I have good communication skills as well as great commitment towards work

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I have strong organizational and people skills. I communicate well with the craft and customer, both written and verbally, I am also computer literate.

I am a Chemical Engineer by qualification. In my professional career spanning over nineteen years, I have worked in the Marketing function of leading players in the petrochemical industry in India, with regional responsibilities spanning across Asia, Western Europe and Africa.

Electrical Technician Electrical instructor

Applying Insulation and Sheet metal Cladding.

1st class welder fitter i have six full years expierience in this field

Welder ****16 Years Experience***

Skills are; mechanic, HVAC, heavy equipment etc.

Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

I HAVE 11 YEARS EXPERIECE AS MOTERMAN ,I AM HOLDING PANAMA THIRD ENGINEER UNLIMITED C.O.C

Millwright/Safety

i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences.

10 plus years as an inspector

DIPLOMA IN MECHANICAL ENGINEERING

Experienced, over 10 years as an instrument control technician commissioning start-up Hydro carbon, fertilizer and petrochemicals plants

Oil field experience in a variety of areas, Supervising drill crews.

I can work any where on a drilling rig, Driller,Derricks,Motors,Floors ect.

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

Professional Experience Mainly related to Industrial and Oil Jobs

Extensive experience in the Electric Sumbersible Pump Industry

15 years experience in the Machinist trade on both CNC and manual machine tools.

Nace 1 Coatings Inspector

Experianced offshore rigger and AB seaman, 200t captain, With US work visa, DSV, AHTS, Supply vessels, jackup barges

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Heavy Equipment Operator

Senior Civil / Structural Designer

I have had both mechanical and condition monitoring experiences which will make me a very competitive candidate to fulfill condition monitoring and/or mechanical position. I have had ISO Cat-II vibration analyst for condition monitoring.

Journeyman Heavy Duty Technician

Maintenance Manager/Welder Skills include Management, Design, welding, machinist, hydraulics, electrical, HVAC, mechanical, fabrication,and construction.

DCS/CONTROL ROOM/PRODUCTION/PROCESS OPERATOR

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out