Resume - E&I Supervisor with 28 years service in all divisions of the electrical industry

Misco Jobs

Resume #57073

CONTACT INFORMATION:
If you don"t see contact information, please log in first.

With over 25 years experience in the Civil, Power, Mining, Petrochemical Commercial and High-Tech Divisions of the electrical industry, complimented with a working knowledge of the National Electric Code to perform Journeyman level work in a craftsman like manner.

* Extensive experience in all stages of electrical and instrumentation construction and methods, As a Supervisor or an electrician. From ground grids and underground conduits to the above ground layout of conduits, cable raceways, fabrication and installation of Electrical systems, service equipment and instrumentation. Utilizing various voltage's from: 4-20 milliamp instrumentation to 220 Kv sub-stations and inner-connect facilities.

* Extensive supervisory experience in Design Build projects and Shutdown Outages comprising of on the spot, real time decision making and field engineering. Working with Electrical and Instrumentation Engineers, submitting appropriate as-built drawings and submittal reports and other verifiable documentation to keep the project flowing and on schedule.

* Supervisory experience in the Start-up and Commissioning of a project. Responsibilities include: Document control, Megger reports, Instrument calibration and loop check documentation, Pre task Safety and System analysis completion reports. Client turn-Over over reports. While always working with the Project manager, Client, Vendor and or Factory representative in the U.S. and abroad for the management and productivity of personnel and equipment, maintaining safety and quality a number one objective.

* Extensive experience in regards to safety, that all personnel take a safe and prominent role on a project. That all pre-task forms are filled out and reviewed by all crafts involved in work on a system, in order to pin point possible safety issues and hazards, possible equipment hazards and impacts to better protect personnel and equipment from injury and damage.

* Extensive experience as an Electrical Superintendent providing detailed daily progress reports to the Project Manager and Client. Having to interface with various other Craft Supervisors to provide accountability and acceptance for project dead lines and Completion Turn-Over Packages. Experience with tracking time and labor cost, Managing personnel, ordering tools, materials and equipment. Scheduling man power task to keep the project on time and on budget.

* Extensive experience in the supervisory of and the installation, termination, troubleshooting and maintenance of specialty A. C. voltage systems, both utility power and diesel generator supplied power comprising of Voltages from 11kv, 5kv, 2.3 kV power distribution centers to 480 volt Motor control centers. Variable frequency drives and D.C. voltage systems such as: Variable speed drives, uninterrupted power sources (battery and diesel Generated supply).

* Experience in Programmable Logic Control, DCS and SCADA Systems.

* Past experience in the calibration, testing and loop checking of Instrumentation and controls for a project.

* Experience in working with the United States Military, operating in Central Asia and in the Middle East. Working on multiple State Department Communication projects, Logcap and Afcap Force protection projects. Providing electrical services and support from 11kv thru 220 volt systems. Providing a better quality of life for our Armed Forces deployed in overseas operations.

* Experience in working with and directing Expats, Third Country Nationals and Local Nationals in the installation and repair of these electrical services.

* Electrical and Instrumentation Education is as follows:
4 year electrical and instrumentation Classroom and OJT apprenticeship.
40 hour OSHA 500 (HSE) classes.
High Voltage cable splicing classes.
Multiple Supervisory and management classes.
As it stands, I average 16 to 24 hours per year of Class room and Lab time to maintain all electrical licenses. Just to name a few and as stated in my cover letter, these classes very from Electrical safety classes, NEC code change classes, Electrical and Instrumentation design classes, Electrical calculation classes, Process flow and instrumentation classes. Over the years I have logged many hours of education to keep me current and marketable in today's electrical Industry and in a global market.

Recent Previous Projects;
* 2007- 3/2005.
Company: MCI/ Verizon.
Primary task as Senior Electrician was to install and maintain over 30 Cellular Sites comprising of 2 different government contracts through out the whole of Iraq and all of Baghdad. Secondary task was to build and provide MEP services for two man camps located in the Victory/Biap area.

* 4/2005-4/2004.
Company: RMS.
Primary task was to build and maintain 11Kv power infrastructure for Camp Cook Iraq. Work comprised of the installation of eight 1.2 Meg diesel 11 Kv generators Control and Sub-Station, Overhead transmission lines and 11Kv – 400 volt ring mains.
Secondary task was to provide electrical services Base wide comprising of voltages from 400 volt – ¼ milliamps.

* 4/2004-4/2002.
Company: Electrix.
Primary task as an Electrical Supervisor was to manage up to 40 Electricians for ongoing 2 million dollar capital projects for a major pulp and paper mill located in Camas Washington.

* 4/2002-4/2000.
Company: Kelly Electric.
Primary task as an Electrical Supervisor was to manage up to 80 Electricians for various projects including a major paper and pulp mill located in Lake Oswego Oregon and a major Aluminum Smelter located in Dalles Oregon.

* 4/2000- 6/1979. Multiple projects as an Electrical Supervisor and as an Electrician serving the Power, Civil, Petrochemical, High- Tech and Commercial Industries.

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1386)

Go to Search Parameters...

Brief Description

Free! Extensive experience in the Electric Sumbersible Pump Industry

Free! Helicopter view, fast analysing, creative in finding solutions, mind setter for safety

Free! I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

I"m a Skilled South African Millwright and Mechanical Fitter (Red Seal)

Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie

I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.

26 years maintenance electrician troubleshooting using plc and ladder logic. dc drives ac and dc motors and controlers

Have more than 13 years of experience in log interpretation

Offshore Oil Rig Motorman

Utilize extensive experience as a mudlogger and an LWD/MWD operator as a well site geologist

Driller / Tool Pusher (Onshore / Offshore)

Project Management & Supervision, System Analysis, Design & Development Work, Device Wiring & Installation, Commissioning, Operation & Maintenance, Planning, Schedule & Decision Making

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

1) Project Management -Any Refinery unit project under USD 250 , from A to Z .2) Refinery Maintenance with Turn Around Management of any unit .3) Any ISO system or safety related jobs of a Refinery .

Experienced professional having two full cycle SAP implementation experience

Extensive mechanical / electrical repair experience, vehicles / aircraft and buildings.

WELDER

To fully leverage my working experience, education and potential, I am looking for an apprentice Millwright job and operator related positions at entry or intermediate level to continue my oil career in Canada.

Long experienced (25years) in marine bunkers-lubes business, with a strong ability to multitask expertly and efficiently.Mainly active in negotiating, promoting and developing the supply business, while at the same time maintaining strong values and ethics.Able to work under pressure.

Millwright/Industial Mechanic and Power Engineer 3rd class.

HVAC BOILER TECHNICIAN

A Directional Drilling Supervisor seeking a job in the oilfield.

Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

Master Electrician with Millwright experience

I have over almost 35 years of technical experience, with almost a twenty five-year career base established abroad. As my enclosed resume indicates, I have more experience in maintenance machining job. My experience includes operation. maintenance and machining of various equipment parts involved in

32 years exp in seismic data processing. QC and interpretation

CAPEX & OPEX multiple projects. 22 years of EPC working background; oil & gas upstream EP, petrochemical, chemical, power generation, rail, water, nuclear & manufacturing (UK - Middle East), business & contractual awareness - FIDIC, IchemE Alliance agreement FOB, CIF, SMMIEC & SMM risk management

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

city and guilds ,years ,1,2,3 . advance craft , higher national

Analyzer and Instrument Technician, with significant experience through training and certification

Extensive experience in power, petrochemical and utilities plant startup, operation and training

I have drive, motivation, confidence and determination.

Alberta B pressure welder/red seal certified. safety tickets all up to date

Caterpillar trained technicians and mechanic can do overhauling and repair all caterpillar engines generators and machines and have a good knowledge in troubleshooting of mechanical and electronic caterpillar engines,can do components repair, pumps,final drives,pump drives,trnsmission torque conv.

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

More then 20 years experience as Welder

I Retired after 20 year of USAF Military Active Duty as an Aerospace Ground Equipment Technician and work for 20 year as Aerospace Ground Equipment Technician. One year Aercraft Aresting Barrier MAAS / Bak -12 Mechanic and 2yrs 7months Power Pro Generation Technician.

I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.

I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.

Over 15 years of progressive work experience in office management providing effective and comprehensive support to managers and senior executives of the company. Document control and administrative works ranging from typing, processing of documents to data control and filing.

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out