Resume - Yokogawa- Centum CS-3000,CS1000 DCS,Triconex(Invensys)

Misco Jobs

Resume #58683

CONTACT INFORMATION:
View contact information...

FIELD OF EXPERTISE

Industrial Automation with

Yokogawa- Centum CS-3000,CS1000 DCS
Emerson Process Management -Delta-V DCS
Triconex(Invensys) – Tricon & Trident PLC (Emergency Shutdown System)
HIMA PLC (Emergency Shutdown System)
Yokogawa-Prosafe PLC ( Fire & Gas Detection System, Emergency Shutdown System )

PROFESSIONAL EXPERIENCE

Total experience of 5.5 years.

Employment Details:-

As a part of Project team-

Generation of I/O data base, Generation of Nest loading, Design of General & Internal Arrangements of System Cabinets, Analog and Digital Marshalling Cabinet, Power Distribution Cabinet, Design & Planning for Power distribution and Grounding Scheme, Wiring drawings, Loop drawings, Cable Schedule, Interconnection cable Schedule, Customer correspondence, Graphics generation, Trends, Control groups, Logic development., Generation of regulatory control schemes, Generation of Trip/permissive interlocks for plant related equipments, Establishing serial communication with subsystems, Generation of OPC interface programs in DCS, Commissioning the PLC & DCS, Hardware and software trouble shooting, Interacting with client, consultant and contractors, plant start up activities and plant normalization.

1) May 2006 –till dated

Total experience of 0.9 years in Equipment & Control Africa Ltd., Nigeria, as Project Engineer.

Equipment and Controls Africa Ltd.,a part of Equipment & Controls Inc. (ECI) is the sole Engineering house for Emerson Process Control & Hima PLC for seven countries in Africa Continent, serving Oil giants including Shell Petroleum development Corporation(SPDC),Exxon Mobil(MPN ),TOTAL,Chevron,BP,AGIP.

Project: Shell Petroleum development Corporation(SPDC)- Bonny Emulsion Project
System Configuration: DeltaV DCS(Windows Xp)
HIMATRIX PLC (ESD System)
My Role: Lead Engineer

Project Description: It is Bonny emulsion Up gradation Project.
Responsible for the Software implementation of all Logics in HIMA Plc, depending upon Cause & Effect Diagram & Process Flow Diagram (PFD), generation of Graphics, Implementation of Control schematic, serial interface between DeltaV and HIMA system.

Project: Mobil Producing Nigeria Unlimited(Exxon Mobil)- EPC2B Project
System Configuration: Triconex PLC (Windows Xp)
Detronics(F &G System)
My Role: Lead Engineer

Project Description: It's a QI offshore Platform Updradation project under the supervision of turnkey contractor Acergy, France.
Responsible for the Software implementation of all Logics depending upon Cause & Effect Diagram & Process Flow Diagram (PFD)made by MPN. It Consists of safety & ESD Logic for the Plant,interface with existing Tricon System. Serial Communication with Wonderwire HMI System.

2) July 2002 –April 2006

Worked as Industrial Automation Engineer, Grade- Executive, in Yokogawa India Ltd.

Yokogawa Electric Corp., Japan, is a pioneer organization in the field of Industrial Automation. Yokogawa India Ltd., is the Indian division of Yokogawa Electric Corp., Japan, reputed for its work quality, contributions and excellence achieved in the field of Industrial Automation

Some of my major Projects in Yokogawa:-

Project: Indian Oil Corporation Ltd.(IOCL) Haldia Refinery- MSQ Project

System Configuration: Yokogawa Centum CS3000 DCS (Windows XP Platform),
Triconex PLC (Windows 2000 Platform)
HART Maintenance System with Yokogawa PRM(Process Recourse Management).

My Role: Lead Engineer

Project Description: It's a MS Quality Updradation project under the License of AXENS,France.I was sole responsible for the Software implementation of all Logics depending upon Cause & Effect Diagram & Process Flow Diagram (PFD)made by Axens.It Consists of safety & ESD Logic for 3 units of the Plant,3 H2 Compressor logic, Chiller package logic & Most Importantly the DRYER Logics(Feed dryer, Hydrogen Dryer & Off gas Dryer).
I am also Involved In the Detailed System Engineering (CS3000) including Nest loading, Complex Loop Generation, Serial Communication With Triconix PLC, Tank Gauging Systems (SAAB),NIR Analyzers, HMI Graphics etc Lead my Team to successful implementation of the project with in a tough schedule.

Project: Indian Oil Corporation Ltd.(IOCL) Haldia Refinery- SRU-III Plant –Add on Project.
System Configuration: Yokogawa Centum CS DCS (Unix Platform),
Triconex PLC (Windows 98 Platform)

My Role: Project & System Engineer

Project Description:
It's a Sulpher Recovery Unit project under the License of STORK, I was sole responsible for the Software implementation of all Logics in Triconex system, depending upon Cause & Effect Diagram & Process Flow Diagram (PFD) made by Stork. Developed the control Schematic, HMI Graphics in DCS
.
Export Project: Lamson Sugar Joint Stock Company(LASUCO),Vietnam-Alcohol Plant

System Configuration: Yokogawa Centum CS-1000 DCS (Windows 2000Platform),

My Role:- Lead Engineer

Project Description: It's the largest Alcohol Plant In Vietnam. My involvement was mainly confined to detailed System Engineering, includes Nest loading, Complex loop Generation, implementation of logics & System Spec generation.

Project: Oil and Natural Gas Corporation(ONGC) - Mumbai High North Field Water Injection Platform - Grass Root Project.
System Configuration: Yokogawa Centum CS-3000 DCS (Windows 2000Platform),
Prosafe PLC for F&G Detection
Prosafe PLC for ESD Protection
FAST TOOLS (SCADA System)(Windows 2000Platform)
HART Maintenance System with Corner Stone S/W workstation.

My Role:- Lead Engineer

Project Description: It's a OFFSHORE Oil Project With Oil Major ONGC, India. This is a Water Injection Plant for supporting one of their main OIL Extraction Station(BHN & BHF).I have incorporated all th Major Logics involved for ESD & F&G Detection System. Also developed all DCS Logics/ Loops, HMI Graphics etc.

Project: Brahmaputra Valley Fertilizer Corporation Ltd(BVFCL),Namrup,Fertilizer plant
System Configuration: Yokogawa Centum CS-3000 DCS (Windows 2000Platform),
Prosafe PLC for ESD Protection
Project Description:
I had incorporated all the Major Logics involved for ESD System. For DCS I have done detailed System Engineering, includes Nest loading, Complex loop Generation, implementation of logics & System Spec generation.

3)September2001-June 2002

Worked as 'Asst. Development Engineer' in H. Guru Industries, an ISO 9002 Company, one of the pioneers in the Pressure & Temperature measuring Instruments. Involved in Development of the product Quality and development of new products with better accuracy and quality.

EDUCATIONAL QUALIFICATION

Distinction & Diploma in Instrumentation Technology(78.2%)

Training Attended.

Delta V Training Details:-

1.Place of Training-Emerson Process Management, Dubai
2.Course No-7009
3.Course name-DeltaV Operate Implementation I

HIMA Training Details:-

1.Place of Training-HIMA Paul Hildebrandt GmbH+Co KG,Dubai
2.Course name-ELOP II Engineering

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 1484)

Go to Search Parameters...

Brief Description

My qualification are heavy equipement technician specially on hydraulic system ,trouble shooting,repair modification and commisioning

4 years experinece in electronincs and electrical related works and in embeddeded sytems

Young Mining Engineer (short experience in geophysics - jr Observer, HSE Officer, and coal mines - trainee)

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

Would like to personally discuss my qualifications and personal resume in greater detail and look forward to scheduling a personal interview with you in the near future. I have my T.W.I.C. Industrial safety Training. 24 hour Hazwoper/Forklift Certification. Confined Space Training;

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

I have 5 years as a Cad Designer using Inventor 3D and AutoCAD

Planning/Schedule Engineer,Maximo IMplementor,

CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.

Scaffolding supervisor, 12 years experience in oil and gas projects, international experience, 200+ staff on last project, teaching to locals experience

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

Crane Driver, Rigger, Scaffolder, Dogman, Multi-skilled operator, Shutdown & Construction experienced.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

I'm a Strategic Marketer for Oil Pipe line for Baosteel Iron and Steel in Indonesia, and currently trying to flap my wings abroad for experience and better salary

Good analytical mind, good communication skill, result oriented and team player.

a young engineer who has versatile knowledge in mechanical engineering , marine engineering and electrical wiring/installation(domestic and industrial)

Confident to handle the construction and quality control activities as specified in the Drawings and applicable standards and specifications.Familiar with Material Inspection, dimensional check and documentation as per Construction Materials Standards such as ASTM / ASME SA 106, SA 515, SA 516etc.

Yokogawa- Centum CS-3000,CS1000 DCS,Triconex(Invensys) – Tricon & Trident PLC (Emergency Shutdown System),HIMA PLC (Emergency Shutdown System),Emerson Process Management -Delta-V DCS,Yokogawa-Prosafe PLC ( Fire & Gas Detection System, Emergency Shutdown System ),ESD,F&G

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations supervisor or as an inspector. I have over 25 years experience in the natural gas transmission and distribution pipeline industry.

Recent MBA grad with spl in Asset Mgt; bachelors in IT;3 yrs wrk exp varied business segment

8 Years extensive experience in QA/QC inc: India and overseas.

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

Looking for any position with good pay and benefits

Sales and Office Administration for Steel Manufacturing Firm

I have worked in natural gas and oil production plants where duties included both operating and repairing associated equipment. I know how to operate most tools, heavy equipment and can fabricate a lot of my own parts.

Biomedical Engineer

Repairs, maintenance, wiring, troubleshooting schematic diagrams of cattlepillar control panel, wiring of the three phase starters e.g. star delta, rotor resistance starters, auto transformers, direct online starters, servicing and installing three phase motors, service of caterpillar alternators.

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

I've almost 15 years of experience in inspection (construction like pipeline onshore, offshore, fabrication of pressure vessel, plant piping, and structures component.

Greenhand Roustabout course (Manual Handling, Safety Observation Systems, Risk Assessment, COSHH Awareness, Helideck Assistant). BOSIET (Basic Offshore Safety Induction & Emergency Training). NOGEPA. OPITO Approved Slinging and Lifting Operations' course. UKOOA Medical.

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

OSHA, Honesty, Windows, Ability to work with others, MSDS, Multi-tasking, Word, Detail Oriented, Forklift, Patience, Excel, High work standards & ethics, Safety Awareness, Leadership, Access, Results Oriented

Procurement specialist in the Oil & gas Industry with 9 years experience of procurement/buying/contracts/expediting.

Geologist

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Quality dozer/blade/excavator operator in all aspects of construction

Rigger crane op scaf

Catering Management

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Buyer/Purchasing Administrator, Planner/Scheduler, Sub Contract/Coordinator

Over 7 Years Military Experience in the Petrolum Supply Specialist Role. Have succeeded at various jobs in Sales, Marketing, Insurance and Mailroom Processing.

With over 4 years experience in Quality Control & Assurance also in Inspection application & method. Demonstrated capability of technical expertise to ensure the quality of work accodance with Specification, code or standard, and to make sure the schedule of work on time.

Other than my recent employment my background includes but not limited to: 5+ years in drilling and work over rig experience, I’ve spent at least 1 or more years working or training in every position, 1 year as floor and motorman, 3 years as derrickman

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

I've worked the oilfields for a very long time off and on, I know pretty much everything there is to know, I'm a leader and do the best I can do

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out