Resume - Rotating Equipment Specialist/Vibration and industrial Balancing experiences

Misco Jobs

Resume #59998

CONTACT INFORMATION:
View contact information...

------------
HONORIO D. FERRER
POSITION DESIRE: ROTATING EQUIPMENT TECHNICIAN / SPECIALIST
OBJECTIVE
To expand and utilize my knowledge in the field of Vibration Analyzing and Balancing in the modern world of Technology.
EXPERIENCE
18 August 1991- present Arabian Gulf Oil Company Benghazi, Libya
Senior Mechanical Technician- Rotating Equipment

Duties and Responsibilities:

„« Assigned in Sarir Oil Field and Sarir Refinery as a Mechanical Specialist whose function is to provide technical support to all rotating equipment on both areas of responsibilities. (The oil field has an average production capacity of 200,000bpd of crude oil and 10,000 BPD of gasoline - refinery output)

Scope of Work:

1. Doing overhauling and preventive maintenance job.
2. Trouble shooting and do some modification of equipment such as impeller trimming if required( impeller will be rebalanced).
3. Vibration Analyzing: Using frequency spectrum and Phase tracking analysis (using SCHENCK vibroport 25, 30 & 41).
4. On shop balancing (using SCHENCK CAB -720 ) and field balancing(Using Vibroport 30 and 41) of rigid and flexible rotors.
5. Alignment using conventional dual gauges and ultra accurate laser alignment machine (Rotalign pruftechnik):
Kinds of equipment in the area of responsibilities knows to operate and repairs:
a) Rotary, Centrifugal, and Reciprocating pumps, and Compressors.
b) Familiarity on static and mechanical seals reconditioning and repair.

12 Feb. 1990- 28 Feb. 1991 WAHA Oil Company Tripoli, Libya
Electro-Mechanical Technician (General Maintenance)

Scope of Work:

1. Assigned in Waha Oil Company Head Office Building to maintain building heating and air conditioning system and its emergency generators set for uninterrupted power supply to the building.
2. Doing daily check to all equipment under my duty of responsibility.
3. Performed trouble shooting, preventive and maintenance of all equipments in the building. Tending operation of chillers (Centrifugal Hermetic). Took hourly records of parameters, adjustment of thermo coolers for more efficient machine performance. Starting, stopping and synchronizing of units as required.
4. Make daily reports: Weekly, Monthly and Yearly Operational and Maintenance activities in the Building Plant Room.
5. Assessed materials consumed and spare parts used and to be needed for future requirements of maintenance such as Chemicals for 2 Units Desal. Plants, Fuel being consumed by Boilers, Refrigerant and Oil for Chilling Plant (3 Units), Lube Oil for Diesel Gen. Sets and other consumables needed in Plant Operation and Maintenance.
6. On the job training to 4 Locals assigned in the operation and maintenance of Plant Room in the building.
Others:
ƒæ Performed water analysis, adjustment of chemicals feed pumps, mixing of chemicals (before) to be fed in the system; Chlorine, Iron, PH and TDS of Feed H2O and Permeate Water.
ƒæ Recording of Data for Daily/ Weekly/ Monthly/ Yearly Reportings.

11 Aug. 1981-10 Oct. 1986 SCECO West Jeddah, KSA

Gas Turbine Operator

Duties and Responsibilities:

„« As an Operator, report directly to Chief Engineer of the plant. Work on shifting basis -8 hours duty.
„« Responsible for starting, synchronizing, stopping and emergency stopping of the unit as required. Hourly reading of Main Units, accessories/ auxiliaries parameters. List down faults/ troubles and all activities encountered in entire shift. Adjustment of amperes, frequency, loads, voltage and others for optimum performances of the units.
„« Properly turn over to next Operator on duty. Remarks all the activities in Log Book and Log Sheets for Operators guidance to operators.

7 May 1979-24 Apr 1981 Al Touki Co. for Industry and Trading Jeddah, KSA

Electrical/Mechanical Technician

Scope of Work:

1. Tending the operation of (4) Four Units of Taiyo (Mitsubishi) Diesel Generators Sets, with maximum capacity of 1000 KW each unit.
2. Hourly reading of system and units parameters data. Responsible for control adjustment such as Amperes, Frequency, Voltages, and Loads for efficient Machine Performance.
3. Executed remedial counter measures to units with troubles. Responsible for stopping, starting synchronizing and emergency stopping as required
4. Doing preventive maintenance/ repairs and overhauling of the unit may either be Mechanical or Electrical. Acts as a Group Leader of 5 Crew (2 electricians & 3 mechanics).
5. Made Daily, Weekly, monthly and Yearly Reports in the Plant Room activities: Consumed Manpower, spare parts, fuel consumed, oil consumed, total generated wattage, kinds of troubles, maintenance applied and total running hours of the Plant.
6. Reports were Daily Log on Operators Log Book and Sheets for Daily Reference of Operator's itself.

11 August 1973-7 May 1979 Filipinas Synthetic Fiber Corp. Laguna, Philippines

Power Plant Mechanical Technician

Duties and Responsibilities:

„« Doing mechanical daily check to all rotating equipment in the area of responsibility and do repair to minor troubles and made appropriate reporting to major problem encountered in the entire shift.
„« As a Power Plant Mechanical Technician act as a Lead Man or Team Leader. Performed preventive maintenance, trouble shooting, minor repairs, general overhauling.
„« Performed testing and execute adjustment of controls, valve, and other requirements of the units before endorsing to Operation Department for service.
„« Conduct a daily, weekly, monthly and annual maintenance report.

EDUCATION

1971-1973 Western Batangas Technological Institute
Balayan, Batangas, Philippines
Auto-Diesel Mechanic
PERSONAL PROFILE
Born on March 2, 1953, married and a father of three. Weights 170 lbs, and stands 5¡¦6¡¨height. Expert in On-shop and Field Balancing and Vibration Analyzing of Rotating Equipment. Overhauling and repair of huges Diesel Engines,Pumps and Compressor (centrifugal,rotary and reciprocating). Repair and Reconditioning of Mechanical Seals, Alignment using conventional dual dial gauges and Ultra Accurate Laser Technology. With basic understanding in electrical circuitry.Basic knowledge in AutoCAD 2D drawing. An innovative, sociable,systematic and has deep sense of responsibility.

CHARACTER REFERENCE: will be provided.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 1484)

Go to Search Parameters...

Brief Description

Over 28 years professional experience IT and SAP SECURITY

Master Electrician with Millwright experience

32 years exp in seismic data processing. QC and interpretation

Instrument technician

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

I have experience as a tool pusher and driller.

Rig manager(workover) - Sudan, Field supervisor(workover and completion rigs) - Egypt, Company representative - Libya/Canada. Project supervisor - Libya

Automotive Painter

I was working at sea for 28 years, including 12 years as a Master. Though I have a quite large experience in the trading on tankers I would like to find the same position in offshore industry, such as FSO, AHTS, PSV w/ot DP.

Experienced derrick operator, floor hand, roustabout, and driller

I have been working as a mechanical technician for 19 years. I also have welder and fitter skills and a qualification in Engineering.

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

QA/QC Coating Inspector NACE Certified # 10362

Driller-15 Years Toolpusher-3 Years Oilfield Experience 30 Years

I have practiced my knowledge and expertise in these fields: Gas Measurement, Gas Plant and Gathering Operations, Management, Safety and Environmental awareness.

14 years of oil&gas,petrochmical QC and construction experience

Highly Skilled and conscientious B Welder/Vessell Fitter for the last 17 years. Dedicated and organized, able to prioritize and meet company deadlines.

Seeking mechanical supervisor/mechanic position

Extensive experience in power, petrochemical and utilities plant startup, operation and training

Manage, Estimate,billing, Skids and pipe fabrication Shop and field

With a total of 20 years experience in various welding jobs from an oil gas, refinery & pipeline fabrication, platform, jet & fuel tanks, etc. With experience in pipe welding, pipe fitting fabrication, arc (SMAW) welding, gas welding, TIG, and FCAW welding. Familiar and actual practitioner of Weldi

14 yrs experience in general welding and fabrication. I have been passed the TESDA (Technical Education And Skill Development Authority) National Competency Test II of 6G SMAW,6G GMAW, and 6G GTAW. Competent of high pressured pipe welding and blueprint interpretation

I have worked in th Alberta and Saskatchewan oilfield since 1983 doing a variety of work. From labour jobs to shop forman to managment.

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

Free! I have been in the Oil & Gas industry for the last 19 years. I have worked my way up the ladder from floor hand up to Rig manager and the last seven years as Well Site Supervisor.

I have been working offshore for the past 25 years, working my way up through all positions to Day Drilling Supervisor. Since August 2007 to present, I have been working onboard the ‘Wilcraft’ jack up rig first as Night Drilling Supervisor and as of September 2008 as Day Drilling Supervisor.

Rig Mechanic 32 years exp onshore and offshore with supvisory esperience also

Extensive experience of installation and inspection & supervision of electrical equipment in hazardous and non-hazardous areas i.e. - Installation and commissioning of P.L.C. panels: switchboards: main circuit breakers: transformers: generators: 3 phase motors: 3 phase power supplies: marshalling bo

Have surveyor, title abstractor, draftsman, networking and landman experience.

Piping supervisor/ Project Manager

10 yrs in fuels, postions held operator, supervisor, special projects, op's manager in USA, Iraq & Afghanistan

I have worked over in iraq working 12 hours a day seven days a week straight for tree months at a time in all types of conditions.....worked as a V S C Manager for 2 1/2 years over in Iraq

Driller/Toolpusher looking for over seas position,has cyber, Top drive & directional experience, 7 years drilling , 15 years derricks, 6 years work over , 1 year geothermal experience. 27 total years experience.

Development Geologist in a clastic reservoirs, integrating Seimic, wire line logs and Core Data. experince in basic petropysical analysis and geocellular models

DRILLING SUPERVISOR , 22 YEARS EXPERIENCE IN OIL & GA INDUSTRY ,OFFSORE & ONSHORE AS A SUPERVISOR FOR 18 YEAR ,DRILLER ,TOOLPUSHER, RIG MANAGER AND DRILLING CONSULTANT

I’ve been in the oilfield for over 20years and have worked my way from the bottom to my present postion as driller , I have well control card and forklift and manlift certificates and valid passport, I’m looking for a company to excel with . At your convenience i'd like

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

SHOP FOREMAN, CVI CERTIFICATION, LEAD HAND, HEAVY DUTY MECHANIC, PARTS AND INVENTORY, HEAVY DUTY EQUIPMENT PM SCHEDULING AND MAINTAINING DATABASE OF FLEET

Rig mechanic/heavy machinery mechanical fitter/aircraft mechanical ground engineer can do any thing.

Free! Over 25 years experience both Hands On, Inspection and Management

Marine electrical fitter, 20 years experience, trade qualified, was a foreman in the field. Skilled in mechanical / hydraulic servicing as well.

Mud Engineer

A. Competencies/Skills for over fourteen (14) years of experience in different projects as Crane Operator and Heavy Equipment Mechanic a. ARAMCO-Certified Crane Operator in oil and gas wells for all required works in drilling and rig moving b. Qualified Crane Operator for underground civil works c.

24 years experience in completions and workovers.

Well site supervisor for 4 years specilizing in horizontal, directional, underbalanced, reentry wells.

at present working on cyberbase rig totally computerised

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out