Resume - Principal civil/structural designer

Misco Jobs

Resume #63650

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

To fully utilize my twenty-six years of extensive and progressively responsible design and detailing experience as a principal civil/structural designer providing unique and creative solutions to difficult engineering problems.

EXPERIENCE

02/07 – 09/07 Harris Group Inc.
1100 Spring St., Suite 300, Atlanta, GA (404) 815-6789
My responsibilities included creating and revising structural steel design drawings of a replacement air cap on the No. 5 tissue paper machine for Georgia-Pacific in Palatka, Florida. I edited 2D design drawings using AutoCAD 2005. I was also responsible for checking shop drawings and returning them to the detailer, communicating running design changes with the other discipline leads and the field during construction and maintaining document control. I was the CAD lead for this project as well as the lead structural designer.

10/06 – 12/06 Fluor Corporation
100 Fluor Daniel Dr., Greenville, SC 29607 (864) 281-4400
My responsibilities included creating and revising reinforced concrete and structural steel design drawings. I edited the 3D models using Frameworks Plus while the detail design 2D drawings using AutoCAD 2004 and Microstation J. I was also responsible for communicating running design changes to other discipline designers and maintaining proper documentation.

1/05 – 4/06 Breshears/Thornton Engineering Consultants, Ltd.
1300 SW 5th Ave., Suite 500, Portland, OR 97201 (503) 678-2434
My responsibilities included preparing and revising reinforced concrete and structural steel construction drawings. Additional responsibilities include maintain integrity of CAD files and insure adherence to established CAD standards by CAD team, coordinate design interface (at CAD level) with other disciplines to insure accuracy and provide input to engineers with regards to schedule and detailing. B/TEC provides construction documents for all Willamette/Weyerhaeuser paper mills nationwide.

8/01 – 11/04 Tetra Tech FW Inc. (formerly Foster Wheeler Environmental)
3200 George Washington Way, Richland, WA 99352 (509) 372-5800
My responsibilities as a member of the Idaho Spent Fuel project located at INEEL in Idaho Falls, Idaho included preparing reinforced structural concrete design drawings, maintain integrity of CAD files and insure adherence to established CAD standards by CAD team, coordinate design interface (at CAD level) with other disciplines to insure accuracy and provide input to engineers with regards to schedule and detailing. As a member of the Second Line of Defense project team, my additional responsibilities included acting as CAD lead on an as-needed basis, act as the design lead for smaller teams of designers and drafters and provide support and guidance for off-site design teams and subcontractors while they were on-site for the initial site evaluations and documentation phase. Assist I.T. staff in set-up and maintenance of desktop and laptop PC's including upgrading and troubleshooting.

6/00 – 8/01 Breshears/Thornton Engineering Consultants, Ltd.
See description above.

12/99 – 6/00 Lawrence Livermore National Laboratory
7000 Vasco Rd., Livermore, CA 94550 (925) 422-1100
My responsibilities included prepare and revise structural steel construction drawings for the National Ignition Facility (DOE #W7405). Conduct as-built survey of new construction and provide fabricator with revised connection details. Perform material take-off of completed steel construction drawings; provide weekly status reports and estimate man-hour requirement for each task within my area.

6/99 – 12/99 British Nuclear Fuels Limited
3070 George Washington Way, Richland, WA 99354
As the structural department CAD lead for the Pre-treatment building team, some of my daily tasks included maintaining the integrity of all dept. CAD files; insuring standards were adhered to by dept. members and provide coordination of design with other disciplines. I performed material take-off estimates, developed and checked design standards and produced structural concrete 2D drawings and 3D renderings utilizing MicroStation SE and Frameworks Plus for proposed nuclear waste vitrification project at the DOE / Hanford reservation.

10/98 – 6/99 Lawrence Livermore National Laboratory
See description above.

2/98 – 7/98 Fluor Daniel Inc.
One Flour Daniel Dr., Sugarland, TX 77478 (281) 263-1000
My responsibilities included preparing and revising reinforced concrete and structural steel construction drawings for chemical plant client. Provide plant layout drawings for new railroad spur(s).

9/95 – 2/98 Breshears/Thornton Engineering Consultants, Ltd.
See description above.

3/95 - 9/95 Basic Systems, Inc.
10901 Clay Pike Rd., Derwent, OH 43733 (740) 685-2511
My responsibilities included preparing and revising reinforced concrete and structural steel construction drawings for Shebelinka gas refinery near Chervonii Donets, Ukraine. Provide quantity take-offs for all materials including concrete anchor bolts, provide bolt manufacturer with accurate accounting and specs for all bolts and inspect prior to shipment to site.

1/95 – 3/95 The Pritchard Corp.
11401 Lamar Ave., Overland Park, KS 66211
My responsibilities included preparing and revising design drawings for reinforced concrete and structural steel as part of a refinery expansion near Houston, Texas. Structural steel detailing and underground utility designs were part of the task.

9/94 – 1/95 ICF Kaiser Engineers Hanford
1200 Jadwin Ave., Richland, WA 99352
My responsibilities included preparing and revising design drawings as a member of the Multi-Function Waste Tank Farm project team (DOE #W236A). Design elements consist of reinforced concrete structures, structural stainless steel detailing, and underground utilities. Paper space and external reference (Xref) features were used extensively.

7/93 – 9/94 Hopper & Dennis Engineering
314 W. 15th Ave., Vancouver, WA 98660
My responsibilities included researching project history, maintaining files of all pertinent information, producing designs of grading/drainage plans including hydraulic calculations, an earthwork balance, research and design vertical and horizontal control for underground utilities and submit for approval to each agency. General office tasks as required including drawing and document control, field inspection of construction and QA/QC of drawings. Tasks were accomplished utilizing HASP Release 4.0 engineering and architectural software, AutoCAD HydroCad Release 3.2 and Civil Tools software.

4/93 – 7/93 International Technologies Corp.
1100 Jadwin Ave., Richland, WA 99352
As a contract drafter responsible for compiling, collating, comparing and all under/aboveground utility plans within the 100 B/C Reactor Area at the Hanford reservation as part of the decommissioning and large-scale reclamation plan. Prepared all drawings, figures, estimating sheets and tables using AutoCAD, digitizer, pen plotter and LaserJet plotter.

11/92 – 1/93 J.H. Kelly, Inc.
821 Third Ave., Longview, WA 98632 (360) 423-5510
As part of a bidding task force I was responsible for identifying all concrete embed items and anchor bolts and creating an organized spread sheet that would allow an accurate accounting and provide fabricators with a basis to estimate the cost of manufacturing the items. This was a very fast track bid and required a very high degree of accuracy as the bidding for this project was very close.

8/92 – 11/92 Harris Group, Inc.
1750 NW Naito Pkwy., Portland, OR 97209 (503) 228-7200
As a contract structural designer, I was assigned to produce structural steel plans, elevations and detail drawings for a large paper/pulp industry.

2/92 – 8/92 J.H. Kelly, Inc.
821 Third Ave., Longview, WA 98632 (360) 423-5510
As an estimator in the Ferndale, Washington office I prepared construction bids by conducting material take-off and securing quotes from sub-contractors for structural and mechanical projects. As a field engineer I was responsible for documentation, correspondence and coordination of subcontractors and as client liaison.

7/90 – 2/92 CH2M Hill (formerly VECO Engineering)
1313 Bay St., Bellingham, WA 98225 (360) 676-1500
As a senior civil/structural designer assigned to two separate task forces, my duties included field inspection, detailed design and checking of access roads, grading plans, storage tank & powerhouse foundations, underground utilities and an effluent treatment plant at regional refineries.

1/90 – 7/90 Udelhoven Oil Field Systems Services
184 E. 53rd Ave., Anchorage, AK 99503 (907) 344-1577
As an as-built drafter working in the Kuparuk oil production facilities on the North Slope of Alaska, I was responsible for checking and drafting electrical loop diagrams, wiring diagrams, cable tray routing plans and elevations. I also prepared piping drawings by checking them against existing field data.

9/89 – 1/90 Alaska Anvil Inc.
509 West 3rd Ave., Anchorage, AK 99501 (907) 276-2747
As a mechanical designer, my duties included initial design for a replacement of existing oily tanker ballast water treatment system and modify existing plant drawings for local tie-in at the Alyeska pipeline company terminal at Valdez, Alaska.

3/87 – 9/89 Fluor Daniel Alaska, Inc.
700 'G' St., Anchorage, AK 99501
My responsibilities consisted of structural & mechanical design to modify existing structures to interface with new equipment at Kuparuk oil production facilities on the North Slope of Alaska. Numerous and frequent field trips to remote facilities were required to insure proper final design and installation.

4/86 – 3/87 Alaska Development Consultants, Inc.
5350 Arctic Blvd., Suite 200 Anchorage, AK 99503
Design drafter. Details upon request.

12/84 – 4/86 R & M Consultants, Inc.
9101 Vanguard Dr., Anchorage, AK 99507 (907) 522-1707
Design drafter. Details upon request.

8/81 – 9/84 Centrum Engineers
9101 Vanguard Dr., Anchorage, AK 99507
Field inspector and civil drafter. Details upon request.

EDUCATION & TRAINING

* Associate of Science, Petroleum Technology, Kenai Peninsula Community College, 1981
* Graduate, Pipe Design School, Fluor Daniel Alaska, 1988
* Attended University of Alaska, Anchorage, School of Engineering, 1989/1990
* Completed Advanced Structural Strength & Materials, Refresher Training, Christenson Engineering, 1992
* Completed AutoCAD Release 12 Paper space/Model space & Xref course, ICF Kaiser Engineers Hanford, 1994
* Completed Geometric Dimensioning and Tolerancing course, 1999
* Completed MicroStation SE 2D & 3D CAD training, BNFL Inc., 1999
* Completed Frameworks Plus CAD training, BNFL, Inc., 1999
* Last sat for Engineer-in-Training (EIT) exam, 2002
* Graduate, Dale Carnegie Personal Improvement course ditional information including your personality, hobbies, references, citizenship, etc.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1356)

Go to Search Parameters...

Brief Description

Automation & Control System Engineer - PLC, SCADA, DCS, RTU, Software, Industrial Networking

CSWIP Senior Welding Inspector

Skilled welder fitter, hard working level headed man who is ready to take on any task that is thrown my way. I am a fast learner and I m easy to get along with and I get along with others as well. I think I would be an asset to your company.

State of Alaska Licenced Journeyman

Deep knowledge in motor engines and auto-eletrical , eletronic Injection , and etc. I've got trade qualification as mechanic and deep background.

I&C Technician with broad experience

2D / 3D Design Consultant, 13 years Oil & Gas Experience starting with 4 year mechanical apprenticeship. Having worked in Aberdeen, Scotland and Oslo, Norway on surface and subsea production equipment (EDP, LRP, BOP, Xmas Trees, etc).

Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have recently been laid off because of lack of work . I appreciate your consideration and look forward to hearing from you. Sincerely, Doug McKay

Instrument Engineer / Supt

WellSite Supervisor

Professional Heavy Equipment Operator rated with Class B+, Professional Driver for both cars and Heavy Vehicles, Knowledge in Purchasing, Surveying.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Landman, Title Research, Leases, Negotiations

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

Night Drilling Supervisor

34 years in instrumentation industry.

Open Crane Operator and Advanced Rigger

I am a hard worker and am willing to learn anything. I learn and adapt quickly. I am a natural born leader and know that I must follow at times.

Dynamic, self motivated and team player

Construction management, real estate development, heavy industrial construction, construction claims, cpm scheduling, fluent spanish, mining construction

Overall manager for M&E services on a large high school, including 2 boiler houses, heating, hot and cold water, gas, electrical & electronics, and directional drilling.

Professional Contract Chef / EMR Available

Advanced British CITB scaffolder / Supervisor / Foreman-16 years exp

I AM HARDWORKER AND A QUICK LEARNER.

A dedicated worker who is able to solve on job problems and leads the team with motivation

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

I have worked for Eutaw construction two years on various road, interstate projects I have two years of excavator expierence

Paramedic with urban/rural/industrial experience.

I am looking for full time employment in a general labourer capacity

I have 12 years experience with working as a Diesel Fitter Mechanic, I am completly confident with working indepently or as part of a team. I have a certificate in HV mechanical & Electronic Systems, Maintenance and Repair.

Millwright/Industrial mechanic and industrial construction mauntenance mechanic

Rig Superintendant/Commissioning Supervisor/Rig Building Manager/

An experienced Rig Mechanic with high level knowledge on Mining industry

49CFR HAZMAT Technical Trans (D.OT., ADR, RID, IATA, IMDG); HAZCOM (1910.1200)

Electric connection, changing bolt in the diaphragm in turbena source of the electric energy

Installation, maintenance and repair of medical equipments

NACE-USA Certified Senior Corrosion Technologist & MICorr grading from Institute of Corrosion-UK, having 19years work experience in Cathodic Protection Technology Services & Corrosion Control Services is available for employment.

Business Development Executive with over 7 years of experience

Hands on Engineer Looking for challenging position

Principal civil/structural designer

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Crane Operator/Deck Foreman, Level III, HLO, Supervisor, Safety Rep

I am looking to expand my knowledge and experience in the oil and gas industry, I have 5 years exp. as a well service floorhand and relief derrick hand. I am interested in Offshore drilling or related jobs.

I am looking for entry level offshore work.

Looking to obtain Employment in the Oil & gas indusrty

Training/HR Professional, Accredited Vocational Assessor with experience in the areas of Performance Consultancy, Personnel Development, Recruitment, Competence Based (NVQ) Training Systems and Certification, Training Needs Analysis and Evaluation within Oil/Gas, Nuclear, Defense and Railway Industr

manager/worhop/service/electrical

My geological background is unconventional, international, and interdisciplinary; from the petroleum and mining industries, university teaching in China and USA, petroleum-related research in Norway, to mining-exploration and management positions in Laos and Malaysia.

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out