Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #64947 next resume »»
CONTACT INFORMATION:
View contact information...

Professional Regulation Commission (PRC), Philippines, 1980
Registered Master Electrician
Registration No. 7746

Electricity Commission (ELCOM), Papua New Guinea, 1984
Licensed Electrician
License No. 820

Bachelor of Science in Electrical Engineering
Mapua Institute of Technology, Manila, Philippines, 1978

Industrial Electricity (Vocational Course)
Araullo Evening Vocational School, Manila, Philippines, 1980

Institute of Integrated Electrical Engineers of the Philippines, Inc. (IIEE)
Associate Member
Membership No. 3M-7746-81

OK TEDI MINING LIMITED, PAPUA NEW GUINEA, 1992
PLC Logic & Design, Control System & Automation

UNIVERSITY OF THE PHILIPPINES, 2000
Programmable Logic Controller (PLC) & its Application Software

WORK EXPERIENCE
March 17, 2007 to Present
Rig Chief Electrician
KUWAIT DRILLING COMPANY K.S.C.
Kuwait

Ensures all electrical systems and equipment on the rig is maintained to a high operational standard and supervises the safe operation of the rig's Maintenance Department.
Through observation, records, and inspections, ensures that all electrical equipment and systems meet regulatory and Company's requirements.
Ensures all maintenance is performed in accordance with the Company policy and procedures, equipment manufacturer's recommendations, the Rig Operating Manual, and regulatory requirements and codes.
Maintains updated electrical drawings.
Makes decisions on repair priorities.
Initiates analysis and identifies the root causes of failures on rig equipment and systems.
Performs troubleshooting and repair of equipment, directly or through subordinates.
Performs daily visual inspections of equipment and diagnoses actual and potential malfunctions; ensures potential hazards and abnormal operating conditions are addressed quickly, and that any deteriorating conditions are reported to the Toolpusher or Rig Superintendent.
Ensures electrical maintenance, operation, and repair records and documentation are kept accurate and up to date.
Monitors electrical equipment logs to ensure operating and maintenance standards are maintained.
Oversees implementation of the Preventative Maintenance System (PMS) for the rig, and maintains relevant PMS records; monitors the quality and timeliness of preventative maintenance; Generates Maximo.
Perform daily, weekly, monthly, quarterly, semi annual and annual inspections & maintenance as set forth in the preventative maintenance program.
Entries on permits, isolation tags & logs accurately reflect current status of equipment.
Reviews equipment and spare parts inventories to ensure adequate and accurate inventory; investigates and resolves discrepancies.
Requisitions of spare parts, tools, and materials.
Ensures adherence to safety and maintenance policies and procedures.
Participates and promote Safety Training Observation Program.
Participates in the weekly and operational safety meetings.
Develops and implements Job Safety Analysis and prepares hazard assessments as required.
Participates in drills as a member of the rig's Emergency Response Group to advise the Person-In-Charge on the technical aspects of any emergency situation.

Upgrade, Installation of TopDrive
Install National Oilwell Varco Top Drive,
Install Adjustable Frequency Controller, VFD Siemens,
Install Power and Control Cables,
Install Varco controller and instrumentation in the Driller's Console,
Install busbar and Main circuit breaker in the SCR panel.
Terminate, Commission & Start up.

March 14, 2006 to Dec 16, 2006
Rig Chief Electrician
WHITE SANDS PETROLEUM LTD.
Australia

Ensure that all electrical systems remain operative throughout the operation and comply with safety, regulatory body and test standards.
Oversees modifications to electrical equipment and structure; ensures electrical modifications of the rig and new equipment are approved according to the Company's policies and procedures before operation.
Provide on site supervision of Rig Electricians
Monitor the work performance of Rig Electricians to insure the work is done properly and all safety regulations are adhered too,
Set up Power Generation and Distribution in the Rig Site & Camp facilities,
Recondition all electric motors of Hoisting machineries / Drawworks, Top drives, Mud Pumps, Desilter, Desander, Degasser, Agitators, Shale Shakers, Trip tank and Water pumps,
Install new power, control, instrumentation and encoder cables,
Modify controls and Rewire PLC modules, Motor Control Center, Plug Panels, Driller Control Console, Local Control Stations, instrumentations and establish as-built drawings,
Install Gas & Fire Detection System in the Rig floor,
Test, commission and start-up the Rig and all related equipments,
Collect manuals, schematics, blueprints & as built drawings of the rig and all related equipment,
Order materials & supplies as required for implementing necessary repairs & maintaining an on-site stock level of expendables and critical spares,
Prepare of new equipment PM task lists for upload into the computerized maintenance program,
Assist the material control men in preparation of work orders including labor and parts cost estimates as part of the overall maintenance program,
Review monthly cost sheets and assess means to reduce expenditures and improve cost effectiveness,
Performs troubleshooting and repair of equipment, directly or through subordinates.
Performs daily visual inspections of equipment and diagnoses actual and potential malfunctions; ensures potential hazards and abnormal operating conditions are addressed quickly, and that any deteriorating conditions are reported to the Toolpusher or Rig Superintendent.
Initiates analysis and identifies the root causes of failures on rig equipment and systems.
Liaison with Rig Manager, Tool Pusher, Rig Mechanic, Drill Crew and others as required for the proper scheduling repairs & maintenance work,
Carry out post job checks & testing of equipment after repairs,
Finalize daily electricians reports, equipment maintenance reports, & preventative maintenance reports, distribute as required,
Perform preventive maintenance works,
Complete on-site work permits, perform pre-job checks and assign maintenance & repair jobs to Rig Electricians,
Actively assist in handling any emergency, which may occur at the rig or at camp facilities.

August 9, 2004 to February 26, 2006
Electrical Officer, Engine
C. S. C. S. INTERNATIONAL NV
Italy

Perform maintenance, troubleshooting and repair of all Electrical Equipments in a GRT 86,000 Passenger Luxury cruising vessel. The areas of responsibilities are;
Engine, Generator and all related equipments
HV & LV Power, Lighting and Distribution
Navigational equipments
Fire alarm and emergency system
Theaters, Galleys, Restaurants, Bars, Pantries and crew mess halls
Garbage utilities and waste disposal system
Lifeboats and Winches
Air-conditioning and Refrigeration
Passenger and Crew Cabins
Elevators & escalators
Swimming Pools and Lounges

May 2002 to June 2004
Senior Rig Electrician
TRANSOCEAN INC.
West Africa

I was assigned as Rig Electrician to the Rig Transocean Sedco Energy drilling in the Atlantic Ocean territory of Ivory Coast, West Africa for client Ranger Oil of UK. Ensure that all electrical systems remain operative throughout the operation and comply with safety, regulatory body and test standards
Perform repair and maintenance of Generators, Compressors, ACU, SCR, Mud Pump Motors, Drawworks Motor, Rotary table Motor. AC motors of Agitators, Shale shakers, Desander, Desilter, Degasser, Mud Cleaners, Charge pumps, Almagco brake, Water pumps, Cooling fan motors and AOI & Swaco Instrumentation.
Carry out periodic checks and routine maintenance as set forth in the preventative maintenance program on all rig equipments.
Complete on site work permits, perform pre-job checks and ensure the work is done properly and safely.
Prepare and maintain up-to-date maintenance records for all rig equipment and schedule work relating to the PM program.
Initiate spare parts and verify receipt of materials. Assess requirements and prepare list of spare parts to be catalogued as warehouse stock items for all rig electrical equipment.

April 1999 to April 2002
Electrical Engineering Technician / Supervisor
Projects & Maintenance
AZOBELLE PTY. LTD.
Papua New Guinea

Supervised the following Electrical Engineering Upgrading Projects in OK TEDI MINING LTD as follows;
Gravity Projects at Copper Line Final Tailings
Conversion of Copper Final Concentrate Pumps to Variable Speed Drives, VSD
Replacement of Cable Trays to Fiber Glass at the Mill, Flotation and Grinding area
PLC upgrade and rehabilitation of CATERPILLAR SHOVELS at the Mine
PLC upgrade and rehabilitation of 5 MW Mini Hydro Power plant
PLC upgrade of 100 MW Diesel Fueled Power Generating Plant
PLC upgrade of 140 MW Hydro Power Generating Plant

May 1996 to February 1999
Rig Senior Electrician
ARAB DRILLING AND WORKOVER COMPANY (ADWOC)
Libya

My main responsibility is the electrical maintenance and repair of the Rig / Drilling equipments, camp accommodation and facilities.
Diagnose and repair to ensure continuity of operations on malfunctioning equipment of all types, including Generators, SCR; DC motors of Mud Pumps, Drawworks, Rotary table; Elmagco brake, AC motors of Blower motors, Agitators, Shale Shakers, Desander, Desilter, Degasser, Charge Pumps, Mud mixers, water pumps, transfer pumps, etc.
Perform post job checks & testing of equipment after repairs.
Carry out daily, weekly, monthly, quarterly, semi annual and annual inspections & maintenance as set forth in the preventative maintenance program.
Prepare and maintain up-to-date daily electricians reports, equipment maintenance records for all rig equipment and schedule work relating to the PM
Complete on-site work permits and ensure the work is done properly and all safety regulations are adhered too.
Regulate materials & supplies as required for implementing necessary repairs & maintaining an on-site stock level of expendables and critical spares.
Actively assist in handling any emergency, which may occur at the rig or at camp facilities

February 1991 to February 1996
Senior Electrical Foreman
CRUSHING & CONVEYING, Mill Electrical Maintenance
OK TEDI MINING LIMITED
Papua New Guinea

In-charged of 20 Electricians carrying out the Maintenance works at the Mine & Mill. Works as follows;
Conducts daily routine field inspection
Maintains all Electrical equipments operative throughout the operation
Investigates faults and incidents and providing reports
Responsible for providing electrical maintenance services for underground and surface operations in a highly motivated, multi skilled team environment
Responsible for conducting the planned statutory and breakdown maintenance of all electrical equipment at the mill /mine
Demonstrated commitment to health safety and the environment
Prepares work orders
Expedites & tracks materials & equipments in preparation for shutdown schedules
Performs electrical system modifications & establishes as-built drawings
Attends defects, analyze & rectify causes
Prepares monthly maintenance reports & schedules
Updates schematic drawings & technical documents

February 1990 to February 1991
Senior Tradesman Electrician / Leading Hand
MODIFICATION SQUAD, Mill Electrical
OK TEDI MINING LIMITED
Papua New Guinea

In-charged of 15 Electricians carrying out the Modification works at the Mill. Works as follows;
Upgrade Ball Mills & Flotation Feed Pumps Motors from 415V to 3.3KV
Recondition Overhead Traveling Cranes in the ff areas; Crusher, Sag Mills, Regrind Ball Mills & Flotation
Rewire Sump Pumps in Flotation & Thickeners
Upgrade Instrumentation System in Flotation
Upgrade Dump Pocket conveyors Drive Motors from 415V to 3.3KV
Install Drive Motor Frequency Inverters
Rewire Dump Pockets and conveyors electrical & install PLC

February 1989 to February 1990
Senior Tradesman Electrician / Leading Hand
LOGISTICS & SERVICES, Chief Engineer's Office
OK TEDI MINING LIMITED
Papua New Guinea

Assigned to assist the Modification Squad in the following Work Orders:
Re-installation & re-construction of collapsed Crusher Overland Conveyor Electrical
Re-installation & re-construction of washed out Water pumping station due to landslide. Work as follows;
Identify & mark all Power, Control & Instrumentation Cables
Splice 11 KV, 3.3 KV & 415V Power Cables, Control & Instrumentation Cables
Fabricate supports, install Cable Trays & Conduits
Install field devices & wired up
Connect & terminate HV and LV power cables
Test & commission the operation
Recondition & repair of 132/11KV 15MVA Switchyard Transformer heavily damaged due to oil leaks. Work as follows;
Modify transformer secondary terminals
Modify cable entry plates & installed additional cable supports
Fabricate & install Bus bar for multiple HV connection in the secondary terminals
Perform High Voltage termination & hi-pot testing

April 1987 to October 1988
Electrical General Foreman
CONSTRUCTION, Project Group
OK TEDI MINING LIMITED
Papua New Guinea

In-charged of 50 Electricians carrying out the following works; The Electrical installation of a 70,000 T.P.D. Copper Plant which includes; Gyratory Crushers, Overland Conveyors System, 3 Reclaim Feeders, 2 Sag Mills, 4 Ball Mills, 4 Regrind Mills, 2 Banks of Copper Flotation Cells, 2 Thickeners, a Concentrate Thickener, Slurry Pumping Stations, a Concentrate Drying & Ship Loader, Work includes:
Conducts feasibility study
Gathers & checks drawings of proposed electrical installation
Prepare drawings for construction
Do material take off
Organizes & tracks materials & equipments
Prepares schedules of the crews
Plans the department operation internally to meet the completion of the project on time & under budget
Assists commissioning group
Prepares acceptance reports, pertinent documents for turn over to clients
Conducts weekly safety meetings

May 1984 to April 1987
Electrical Supervisor
ELECTRICAL CONSTRUCTION, Project Group
S. L. BIGAYAN CONSTRUCTION
Philippines

Projects were Commercial & Industrial Buildings, Residential, Hospitals, Schools, Government and Commercial Offices. Works as follows;
Industrial, commercial & building electrical installations
Wiring & construction of utilization equipments
Commissioning, operation & maintenance

May 1983 to May 1984
Electrical Foreman
CONSTRUCTION DIVISION
BECHTEL-MKI (Joint Venture)
Papua New Guinea

In-charged of 30 Electricians carrying out the following works: The Electrical installation of a 132 KV Power Distribution and Switchyard and 11 KV Substation, Gold Processing Plant which includes a Crusher, Conveyors, Reclaim Feeders, Sag Mills, Ball Mills, Lime Plants, Leaching, Thickeners & Gold Recovery Plant;
Conduct feasibility study & checked drawings of proposed electrical installation
Prepare drawings for construction
Do material take off
Organize & track materials & equipments
Prepare schedules of the crews
Conduct weekly safety meeting
Assist commissioning group

July 1981 to May 1983
Technical Representative
OTEC MATERIAL HANDLING, INC.
Philippines

Installed Overhead Traveling Cranes, Portal cranes, Jib Cranes, Monorail Hoist, Rope and Chain Hoist with Safe Working Load ranging from 500kg to 200 tons in the plants such as, Sea Ports, Airport Hangars, Cement plants, Mining processing plants, Smelting & Furnaces plants, Car Manufacturers & Stamping plants, Power Plants & Oil Refineries. Work as follows:
Assist the management in bidding the total designed system that determined the cost of the project.
Perform inspection & feasibility studies for various proposed projects
Provide technical support to the crew regarding electrical & mechanical installation
Monitor, commissioned & maintained the safety operation of the equipment
Administer load testing after the completion of the project
Conduct trainings & seminars to the end users regarding safety operation of the equipment
Prepare acceptance reports, pertinent drawings & documents for turn over to clients

August 1979 to July 1981
Building Electrician Foreman
A. D. MERCADO ARCHITECTURAL & ENGINEERING OFFICE
Philippines

Projects were Commercial Buildings, Residential, Hospitals, Schools, Government and Commercial Offices. Works as follows;
Industrial, commercial & building Electrical installation
Wiring & construction of utilization equipment
Commissioning, operation & maintenance

November 1975 to August 1979
Plant Master Electrician
PLANT MAINTENANCE
AMERICAN WIRE & CABLE CO., INC.
Philippines

Install, repair, calibrate, test & maintains power generation, distribution & protective devices, Generators, HV & LV Switchgears, Electric Motors & Control Devices.
Perform preventive maintenance works
Prepare reports & recorded all details of equipments maintained
Diagnose faults & took corrective actions
Equipments maintained are Extrusion machineries, Wire drawing machineries, Magnet wires machines, Respoolers, Braiding machines & Quality Control testing apparatus

January 1972 to December 1974
Plant Mechanic
PLANT MAINTENANCE
INTERNATIONAL TEXTILE MILLS INC.
Philippines

Carried out maintenance, overhauling & repair work on a variety of Mechanical equipments such as Pumps, Compressors, Boilers, Blowers, Hoists, Textile Machineries for Weaving, Spinning & Finishing
Perform preventive maintenance works
Do some lathe machining jobs and fabrications
Prepare reports & record all details of equipment maintained

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 1346)Go to Search Parameters...
Brief Description
Free! Extensive experience in the Electric Sumbersible Pump Industry
Free! Helicopter view, fast analysing, creative in finding solutions, mind setter for safety
Free! I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis
Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.
Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,
Free! E&I Supervisor with 28 years service in all divisions of the electrical industry
I"m a Skilled South African Millwright and Mechanical Fitter (Red Seal)
Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie
I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.
26 years maintenance electrician troubleshooting using plc and ladder logic. dc drives ac and dc motors and controlers
Have more than 13 years of experience in log interpretation
Offshore Oil Rig Motorman
Utilize extensive experience as a mudlogger and an LWD/MWD operator as a well site geologist
Driller / Tool Pusher (Onshore / Offshore)
Project Management & Supervision, System Analysis, Design & Development Work, Device Wiring & Installation, Commissioning, Operation & Maintenance, Planning, Schedule & Decision Making
Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.
Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic
1) Project Management -Any Refinery unit project under USD 250 , from A to Z .2) Refinery Maintenance with Turn Around Management of any unit .3) Any ISO system or safety related jobs of a Refinery .
Experienced professional having two full cycle SAP implementation experience
WELDER
To fully leverage my working experience, education and potential, I am looking for an apprentice Millwright job and operator related positions at entry or intermediate level to continue my oil career in Canada.
Long experienced (25years) in marine bunkers-lubes business, with a strong ability to multitask expertly and efficiently.Mainly active in negotiating, promoting and developing the supply business, while at the same time maintaining strong values and ethics.Able to work under pressure.
Millwright/Industial Mechanic and Power Engineer 3rd class.
HVAC BOILER TECHNICIAN
Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.
Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.
Master Electrician with Millwright experience
I have over almost 35 years of technical experience, with almost a twenty five-year career base established abroad. As my enclosed resume indicates, I have more experience in maintenance machining job. My experience includes operation. maintenance and machining of various equipment parts involved in
32 years exp in seismic data processing. QC and interpretation
CAPEX & OPEX multiple projects. 22 years of EPC working background; oil & gas upstream EP, petrochemical, chemical, power generation, rail, water, nuclear & manufacturing (UK - Middle East), business & contractual awareness - FIDIC, IchemE Alliance agreement FOB, CIF, SMMIEC & SMM risk management
Rotating Equipment Specialist/Vibration and industrial Balancing experiences
(PRODUCTION MANAGER)
Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration
I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development
city and guilds ,years ,1,2,3 . advance craft , higher national
Analyzer and Instrument Technician, with significant experience through training and certification
Extensive experience in power, petrochemical and utilities plant startup, operation and training
I have drive, motivation, confidence and determination.
Alberta B pressure welder/red seal certified. safety tickets all up to date
Caterpillar trained technicians and mechanic can do overhauling and repair all caterpillar engines generators and machines and have a good knowledge in troubleshooting of mechanical and electronic caterpillar engines,can do components repair, pumps,final drives,pump drives,trnsmission torque conv.
SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.
More then 20 years experience as Welder
I Retired after 20 year of USAF Military Active Duty as an Aerospace Ground Equipment Technician and work for 20 year as Aerospace Ground Equipment Technician. One year Aercraft Aresting Barrier MAAS / Bak -12 Mechanic and 2yrs 7months Power Pro Generation Technician.
I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.
I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.
Over 15 years of progressive work experience in office management providing effective and comprehensive support to managers and senior executives of the company. Document control and administrative works ranging from typing, processing of documents to data control and filing.
I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.
Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,
I have extensive experience in plant start-ups, trouble-shooting, and process management as a supervisor, technician and operator. I am seeking an operations oriented position.
at present working on cyberbase rig totally computerised
[ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com