Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #65376 next resume »»
CONTACT INFORMATION:
View contact information...

Objectives and Qualifications

Efforts will be focused on maximizing production through uptime and continuous improvement of skills.
Twenty six years as an electrician in the industrial and corporate environment. Skills are in all types of troubleshooting techniques.

Training

2003-Chief Master Sergeant's Executive Seminar, Andrews Air Force Base, Washington DC. Secret Clearance
Skills and Experience

2007-Fountain Construction Jackson, Mississippi
Experienced electrician with knowledge of plant operations.

1994-Delphi Packard Electric Clinton, Mississippi
Comprehensive knowledge of troubleshooting problems with machinery, worked on DC drives, worked on hydraulics and pneumatics.

1993-Weyerhaeuser Paper Company Jackson, Mississippi
Maintenance Electrician troubleshooting mechanical and electrical problems with machinery.

1991-United States Air Force, Fort Walton Beach, Florida
Activated in support of Desert Storm. Set poles, pulled power lines, mounted transformers, installed lightening arresters and cutouts.

1981-Stone Container Corporation Jackson, Mississippi
Worked on relay logic, motor starters, limit switches, and photo eyes. Replaced bearings, belts, chains and rolls.

Education

Belhaven College Jackson, Mississippi
Masters of Management, December 2003

Belhaven College Jackson, Mississippi
Bachelors of Business Administration, December 2000

Hinds Community College Raymond, Mississippi
Associate of Applied Science, Electronics Engineering Technology, May 1992

References are Available

References

Delphi Packard Electric, Plant Superintendent/Plant Manager
Arnie Senger
110 Oak Wood Drive
Raymond, MS 39154
601 925 2320 work

Delphi Packard Electric, Supervisor
David Bailey
211 East Towne Drive
Brandon, MS 39042
601 259 4138 cell
601 925 2334 work

Delphi Packard Electric, Plant Electrical Engineer
Cliff Sentell
105 Country Meadow Road
Clinton, MS 39056
601 924 2406 home

Lt Col Marty Bryant
172nd Civil Engineering Squadron
141 Military Drive
Thompson Field, Jackson, MS 39232
601 405 8377

SMS Frank Lewis
172nd Civil Engineering Squadron
141 Military Drive
Thompson Field, Jackson, MS 39232
601 405 8359

BIOGRAPHY
UNITED STATES AIR FORCE
CHIEF MASTER SERGEANT STEPHEN D. HENDRICKS

Introduction:

In January of 1979 CMS Hendricks started his military career as a Fire Direction Control Specialist in Field Artilery, Mississippi Army National Guard. In December of 1980 CMS Hendricks joined the 172nd AW, Mississippi Air National Guard, Civil Engineering Squadron, as an electrician. In Civil Engineering, CMS Hendricks trained in in Bare Base Build-up and Rapid Runway Repair. Also in 1990 he was activated in support of Desert Storm at Hurlgurt Field, Florida as a power lineman. In December 2000 CMS Hendricks served in support of Operation Southern Watchm Ali Al Salem Air Base Kuwait, as an electrician. CMS Hendricks received a certificate of appreciation from "THE ROCK" for accomplishments while depployed at Ali Al Salem Air Base. In the wake of September 11th, CMS Hendricks volunteered for "Homeland Defense" "Operation Noble Eagle/Enduring Freedom" as an augmentee, supporting the 172nd Security Forces Squadron.

Professional Military Education:

1991 Noncommissioned Officer Academy, in residence, McdGee Tyson, Tennessee
1992 Associate of Applied Science, Electrical/Mechanical Technology, Community College of the Air Force. (USAF CCAF)
1994 Senior Noncommissioned Officer Academy, correspondence, Gunter AFB, Alabama
2003 Chief Master Sergeant Executive Course, Andrews AFB, Washington DC

Duty Assignments:

3E991 Readiness Superintendent 0000 0172 CEG SQ AMC 05 Nov 2002
3E000 Operations Superintendent 0000 0172 CEG SQ AMC 05 May 2002
3E090 Electrical Superintendent 0000 0172 CEG SQ AMC 01 Mar 1998
54270 NCOIC, Exterior Electrical 0000 0172 CEG SQ AMC 01 Jun 1992
54271 NCOIC, Exterior Electrical 0000 0172 CEG SQ AMC 31 Jan 1986

Decorations:

AF ACH MDL W/1, AFOUA W/9, ADF RES MDL W/M & SLVR HRGLS, ARF MER SVC MDL W/7, NTL DEF SCV MDL W/1, MS WAR MDL W/1, GLOBLE WAR ON TERRORISM SERVICE MDL

Promotions:

1980 Airman
1982 Airman 1st Class
1983 Senior Airman
1984 Staff Sergeant
1986 Technical Sergeant
1993 Master Sergeant
1998 Senior Master Sergeant
2001 Chief Master Sergeant

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 1346)Go to Search Parameters...
Brief Description
Free! Extensive experience in the Electric Sumbersible Pump Industry
Free! Helicopter view, fast analysing, creative in finding solutions, mind setter for safety
Free! I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis
Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.
Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,
Free! E&I Supervisor with 28 years service in all divisions of the electrical industry
I"m a Skilled South African Millwright and Mechanical Fitter (Red Seal)
Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie
I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.
26 years maintenance electrician troubleshooting using plc and ladder logic. dc drives ac and dc motors and controlers
Have more than 13 years of experience in log interpretation
Offshore Oil Rig Motorman
Utilize extensive experience as a mudlogger and an LWD/MWD operator as a well site geologist
Driller / Tool Pusher (Onshore / Offshore)
Project Management & Supervision, System Analysis, Design & Development Work, Device Wiring & Installation, Commissioning, Operation & Maintenance, Planning, Schedule & Decision Making
Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.
Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic
1) Project Management -Any Refinery unit project under USD 250 , from A to Z .2) Refinery Maintenance with Turn Around Management of any unit .3) Any ISO system or safety related jobs of a Refinery .
Experienced professional having two full cycle SAP implementation experience
WELDER
To fully leverage my working experience, education and potential, I am looking for an apprentice Millwright job and operator related positions at entry or intermediate level to continue my oil career in Canada.
Long experienced (25years) in marine bunkers-lubes business, with a strong ability to multitask expertly and efficiently.Mainly active in negotiating, promoting and developing the supply business, while at the same time maintaining strong values and ethics.Able to work under pressure.
Millwright/Industial Mechanic and Power Engineer 3rd class.
HVAC BOILER TECHNICIAN
Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.
Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.
Master Electrician with Millwright experience
I have over almost 35 years of technical experience, with almost a twenty five-year career base established abroad. As my enclosed resume indicates, I have more experience in maintenance machining job. My experience includes operation. maintenance and machining of various equipment parts involved in
32 years exp in seismic data processing. QC and interpretation
CAPEX & OPEX multiple projects. 22 years of EPC working background; oil & gas upstream EP, petrochemical, chemical, power generation, rail, water, nuclear & manufacturing (UK - Middle East), business & contractual awareness - FIDIC, IchemE Alliance agreement FOB, CIF, SMMIEC & SMM risk management
Rotating Equipment Specialist/Vibration and industrial Balancing experiences
(PRODUCTION MANAGER)
Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration
I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development
city and guilds ,years ,1,2,3 . advance craft , higher national
Analyzer and Instrument Technician, with significant experience through training and certification
Extensive experience in power, petrochemical and utilities plant startup, operation and training
I have drive, motivation, confidence and determination.
Alberta B pressure welder/red seal certified. safety tickets all up to date
Caterpillar trained technicians and mechanic can do overhauling and repair all caterpillar engines generators and machines and have a good knowledge in troubleshooting of mechanical and electronic caterpillar engines,can do components repair, pumps,final drives,pump drives,trnsmission torque conv.
SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.
More then 20 years experience as Welder
I Retired after 20 year of USAF Military Active Duty as an Aerospace Ground Equipment Technician and work for 20 year as Aerospace Ground Equipment Technician. One year Aercraft Aresting Barrier MAAS / Bak -12 Mechanic and 2yrs 7months Power Pro Generation Technician.
I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.
I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.
Over 15 years of progressive work experience in office management providing effective and comprehensive support to managers and senior executives of the company. Document control and administrative works ranging from typing, processing of documents to data control and filing.
I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.
Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,
I have extensive experience in plant start-ups, trouble-shooting, and process management as a supervisor, technician and operator. I am seeking an operations oriented position.
at present working on cyberbase rig totally computerised
[ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com