Resume - I&C Specialist with 20 yrs experience, Navy Sub Vet, PLC/DCS and project managem...

Misco Jobs

Resume #65906

CONTACT INFORMATION:
View contact information...

Objective

To obtain a position as an instrumentation and control systems technician

Work Experience

Timec Inc. Vallejo Ca. Feb. 2007- Present
Instrumentation and CEMS Technician

1. Working at Conaco Phillips Refinery troubleshoot and maintain CEMS emissions analyzers, all refinery instrumentation including Rosemount
3051 smart transmitters, level, temperature,pressure and flow instruments. Perform calibration to ISA and NIST standards.Acting as an I&C
specialist train and mentor other technicians.Validate 3051 and modbus/fieldbus controls loops using Hart 375. While plant I&C supervisor is absent took his position and supervised seven other technicians.
Took and passed N.C.C.E.R. Level 5 I&E test during this period.

Caltrol Emerson Process Controls, Hawaii /El Segundo Ca. Oct. 2006-Feb. 2007
Field Service Specialist Reliability Analyst

Provide technical support in plant instrumentation for wastewater facilities, power plants and refineries in the Hawaiian Islands and at the Chevron El Segundo refinery. Provide design analysis and MOC's to address problem areas. Supervise contractors in design rework and installation. Troubleshoot, install and repair a wide variety of analytical instrumentation including VFD.s, emissions analyzers, lab equipment, and CEMS systems according to CFR 60/75 Provide startup assistance and loop calibration and certification. Calibrate various types of flow, temperature and pressure transmitters. Install and calibrate Limitorque MOV.s, and Fisher control valves. Provide design and technical support after hours for various refinery shipping terminals. Train personnel in valve maintenance and tuning. Provide support for Honolulu wastewater plant upgrade to Rosemount 3051 field bus transmitters. Calibrate and tune PID and various control loops to DCS and SCADA.Train other CEMS techs in gas analysis principle, CEMS troubleshooting procedures and analysis. Used Passport, Maximo, and MP3 work order systems.

Napa Sanitation District Napa Ca. Dec. 2003 - Dec 2006
I/C Maintenance Specialist

Maintain wastewater treatment plant instrumentation and electrical controls. Maintain pump station VFD.s, PLC.s, and remote telemetry RTU's. Calibrate plant analyzers including, PH, ORP, Turbidity and Conductivity Analyzers, CEMS/NOX/Oxygen and GCMS. Supervise and schedule maintenance contracts, provide direct oversight of contractors and plant operations staff on analyzer maintenance and calibrations. Submit monthly emissions compliance reports to the applicable state and federal agencies. Maintain Factory link SCADA and Rugid remote I/O telemetry that interface with pump station level, station controls or alarms. Maintain, and calibrate all flow, pressure and temperature transmitters to NIST standards. Maintain accurate calibration database. Perform yearly state mandated mag flow-meter calibrations. Maintain protocol 1 and 2 calibration gases to EPA and CFR 60/75 standards. Set up and program HMI interfaces, smart transmitters, and field bus devices using the Rosemount 375. Maintain digester Waukesha Cogen engine controls and emissions analyzer. Rebuild and calibrate Fisher control valves and Rotork MOV.s. Provide rotating 24/7 on call support.
Supervised plant staff in the correct methodology for calibrating and reporting for state and BAAQMD plant compliance analyzers Acted as I/E supervisor during primary supervisor's absence.

Foster Wheeler Corp. Martinez Ca. Oct. 2001. Nov. 2003
Senior Instrument Technician

Maintain GE Frame 5 Gas Turbines. Calibrate, troubleshoot or repair plant instrumentation and electrical control systems. This included all systems and sub-systems hydraulic, pneumatic, or electronic. Maintain CEMS Cirrus PAI emissions monitoring system. Perform monthly backup of DAHS and file. Prepare and submit compliance reports to state agencies. Troubleshoot, program and maintain a Bailey INFI 90 DCS and Modicon PLC controls. During turbine outages calibrate all field devices associated with turbine control, providing written calibration reports, documenting accuracy according to IAS, NIST and ISO 9002 standards. Supervise staff in correct monitoring of NO, NOX emission monitoring and data acquisition analyzers according to CFR 60/75 standards. Maintain plant LEL and explosives monitoring MSA analyzers. Supervise all plant control valve and actuator maintenance, order and maintain Fisher parts inventory. Maintain all plant safety equipment including portable gas detectors, fixed gas detectors and confined space entry equipment and rescue devices. Trained in confined space entry and rescue.

Central Contra Costa Sanitary Dist Martinez Ca. June 1996. Sept. 2001
Senior Instrument Technician

Maintain wastewater treatment plant electrical and instrumentation systems. This included plant CEMS analyzers, PH, Opacity, conductivity, turbidity and resistivity analyzers. Troubleshoot DI water and filtration plant. Troubleshoot 480 3 phase motors and controls including 200-600 HP VFD's. Design and implement new instrumentation control schemes. Implement plant wide PM schedules and provide improvements to promote greater reliability and equipment performance. Worked rotating on call for emergencies. Maintain Cleaver Brooks boilers and waste heat boiler controls. Rebuilt plant control valves. Maintained plant air and gas compressors.Maintained waste heat boilers, Solar gas turbine and cleaver brooks boilers.Maintained plant calibration standards to NIST and ISO standards. Maintained protocol calibration gas standards. Led continuous improvement teams plant wide, performed process evaluations. Provided agter hours on call support.

Education

Tullahoma High-Tullahoma, TN.
Graduate

U.S. Navy 1976-1982
Graduated Basic and Advanced Instrumentation Schools

Qualified USS Benjiman Franklin SSBN 640 and USS Dace SSN 607 Nuclear Powered Submarines
Attended numerous technical schools during crew off periods

California Water and Environmental Association
Attained I/E Technical Certification Level 2

Trained CEMS/DAHS CFR.s 60/75 Cirrus / PAI
Certified on Factory Link S.C.A.D.A.
Member confined space rescue team.
CPR and First Aid Certified
BATC Certified. Respirator certified.
SCBA certified and SCUBA certified
NCCER level 5 certification
Professional Memberships

California Waste Water and Environmental Association, Instrument
Society of America, ASHRAE. Submarine Veterans Society-USSVI
Hobbies Sailing, diving, camping, fishing and church

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 1343)

Go to Search Parameters...

Brief Description

I have extensive experience in installation, repair and maintenance of a wide range of instruments. I have acquired experience in control loops which include but not limited to temperature, flow, level, pressure, ratio, PH& Conductivity, Gas Analysis, weigh feeders, SCADA and PLC’s, Pneumatics ,Hydr

Holder of Diploma in Computer Systems Analysis and Design

I have three years diploma certificates in instrumentation and i have more then 20+ years experience in instrumentation at present i am working with american company at west africa on offshore platform in instrumentation departments.

10 years of welding and oilfield expeience combined.In addition with pipeline operator certification, offshore oil and gas production certification.

Recent graduate of McGill University, Montreal Quebec Canada. Relevant field and research experience in the Canadian Rocky Mountains with structure sections, digital mapping, and air photo interpretation. Field experience with DeBeers Canada helicopter sampling.

Millwright trade - including turbines, compressor repair, laser shaft alignment, vibration analysis, welding, machining, pumps, layout, cranes and rigging .I am skillful in precision measurement, bearing fitting and function, hydraulic and pneumatic systems and using technical drawings and blueprint

I have learned the following things in my training

KG Dunaway NCCCO

MY EXPERIIENCE AS MAINTENANCE OF PUMPS, VALVES ,GEAR BOX , AIR COMPRESSOR AND PIPE LINE ETC..

Im a driller in the oilfield looking to advance my career

Willing to make a positive contribution to a company. Posses the ability to work independent and carry out assigned responsibilities in a timely manner. Speak and write fluent Spanish/ English associated with industrial automation control instrumentation and related technical field.

I have a variety hands on work experience in electrical field troubleshooting and installation of electrical/instrumentation circuit,PLC programmable logic controller and power plant generating units gas/steam and diesel generators.

Driller Five years, Derrickman Two years, Motorman Three years, Now nurse ICU, able to use micromiter and read blueprints hard worker and easy to work with travel anywhere

I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.

Project Management and Drafting Skills PFDs, P & IDs, General Arrangements,Isometric Drawings

25 plus years of heavy trucking and construction experience.compotent with hand,pneumatic tools, cutting torches, welding in flat position ,current ga. cdl with tank end. hard worker, healthy.

Planner, scheduler, Teamwork, time manangement, lead, excellent communnication

I am working in a oil field company in abudhabi as a store keeper since 1999. I am seeking a suitable vacancy for my experiance.

I am available for immediate employment as an Assistant Driller or at a position below this.

I am young graduate engineer ready to work at any place in the world and with great interpersonal skill with the team

Electrical Tradesman, Electronics Experience, Reliability Planning and Scheduling (Oil & Gas)

Qualified Fitter and Turner / metal machinist

Senior Instrumentation Supervisor / Engineering Planner with SAP R3 experience

Instrumentation Technician responsible for troubleshooting and calibrating of various instruments

I am a diesel mechanic of 11yrs experience 4yrs of these have been working offshore in the North Sea and Overseas.

Complete machinist with over 10 years experience.

journeyman electrician

Diesel technican/mechanic/ Technical Trainer in Iraq/ all heavy duty trucks, trailers vehicles, engines etc/Supervising experience, Excellent organising and admin skills, excellent people skills

Looking for offshore 28/28 rig welding job

Scaffold Inspection and Co-ordination

Inspect, diagnose, and locate mechanical difficulties on buses and trucks. Replace or repair faulty parts including wheel bearings, clutches, oil seals, shock absorbers, exhaust systems, steering mechanisms, & related parts and equipment. Fabricate and assemble parts and equipment for buses.

17-year Multi-Skilled Construction Worker in the Construction Industry (4yrs. Manager;

All aspects of pipeline operations, surveying, vast array of computer knowledge

drafting/design technology, autocad

Diesel Fitter, Welding, Electrical, Pnuematics, Hydraulics, Horizontal and Vertical Boring, Precision machining, Earth moving Equipment, Crushers, Power screens, Fenner boxes, Jaw crushers, Pneumatic, Plumbing.

I&C Specialist with 20 yrs experience, Navy Sub Vet, PLC/DCS and project management

Well Service Supervisor or Coil Tubing Supervisor

I Have Been a Cadastral Surveyor for 6 years in a range of applications, from Oil and Gas applications to Municipal and Legal applications, as well as GIS applications. I Have extensive Total Station: (Leica/Nikkon) and GPS: (Trimble/Sokkia/Leica) experience RTK, PP-Static, and Autonomous GIS Mappin

Qualified and certified electrician, intensive troubleshooting skills

Experienced welder

A wide on-offshore range of experience in heavy equipment maintenance. Managing and supervising day-to-day preventive maintenance (P.M.) using a computerised maintenance management system. (C.M.M.S.) Modify equipment and machinery using management of change documentation (M.O.C.) to improve rel

Industrial Electrician / Instrumentation Technician / Infrared Thermographer

I am presently employed as a Builders Labourer and my duties include scaffolding, and steel fixing. As a Self Employed Diver I undertook mooring installations and sea bed surveys. I have previously worked offshore as a Production Mechanic.

Solid management experience in professional Procurement (purchasing, quality control and logistics)

MBA - Analyst / Commercial / Supply Chain - Oil & Gas

Ten Years Of Effective Managerial/Sales Experience At The Professional Level

I have oilwell service experience with wireline, swabbing, fishing and rental tools. I have 24 years experience with manufacturing and machine work on oilfield equipment. I am an hands on hard working man with good hand eye coordination that likes the challange of working on oilwells.

Country/Sales Manager Africa

Oil and Gas Drilling Professional

Objective: It is my objective to become a contributing member of your company and further my knowledge and become a great asset to your company. I have experience with people and different countries and Cultures and plan on furthering my knowledge and skills with your company.

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out