Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #66290 next resume »»
CONTACT INFORMATION:
View contact information...

Sr. SITE QUALITY MANAGER.

SIGNIFICANT EXPERIENCE: SECURITY CLEARANCE:
Chemical, Oil & Gas, Fossil & Nuclear Power U.S. /DOD/SECRET
Pulp & Paper
UNITED STATES / DOD:

SUMMARY OF EXPERIENCE
33 years with Fluor Corporation:

Over (33) years Mechanical & Civil Exp in QA/QC & Construction Management from $65. Million to $3.2. billion Projects; Including nuclear piping; documentation verification; system verification; hydrostatic & pneumatic testing of code & non-code piping systems; various types of inspection & testing of code & non-code piping systems; welding, piping & structural; pipe fabrication and installation; working knowledge of ASME Sections I & IX, ASME B31.1 & B31.3, ASME Sec.V, ASME SEC.VIII and AWS D1.1. Along with API – 653, & 650
Develop & Writing QA/QC Programs, Site Procedures Manuals, Project Execution Plans & Welding Plans for Projects.
Review/Approve Contractors QA/QC Programs & Welding Programs.
Civil Experience Include Concrete Testing & Soil Compaction Testing and Asphalt Testing.

TRAINING & CERTIFICATIONS:
Level II RT Film Interpretation
Level II Liquid Penetrant
Level II UT Thickness
Level II B31 Visual Inspector
Prolog Management System
Computer Knowledge- Microsoft word, Excel & PowerPoint

FLUOR MIDEAST LIMITED
AUG-2006 to Nov-2007
SITE QA/QC MANAGER
RASGAS
LNG PROJECT
RAS LAFFAN, QATAR
PROJECT COST: 3. 2 Billion

Assigned to the RasGas Project as a Site Quality Manager.
Responsible for writing and implementing a QA/QC & Engineering plan for Mechanical, Civil and Electrical for the Fluor self perform work.
The project Consisted of NewCondensate Storage Tanks, New LNG Storage Tanks, & Piping for Both and New 20,000 sq. ft Control Room and Sub Stations.
Responsible for Review of Contractors QA/QC Programs and Personnel for Approval, Monitoring of Contractors Compliance to RASGAS Specifications and Procedures.
Managing Between 15 to 30 Multi-discipline Fluor inspectors through out the Project. Conducted Scheduled Audits on contractors Quality Plans, ITP's and Method Statements for performance and compliance to Industry standards and client requirements, Monitored Daily inspection Activities along with Training to Multi disciplined inspectors as necessary.
Filled in for the Site Manager when he was away on R&R and Company Business.

FLUOR POWER SERVICES
MAY-2005 TO PRESENT
QA/QC MANAGER
PROGRESS ENERGY
FGD PROJECT
ROXBORO,N.C.

Establish and Supervise an Engineering & Quality Program for a $350. Million FGD Project.
Responsible for Writing and Implementing a QA/QC & Engineering Plan for Mechanical, Civil, and Electrical for the Fluor Self Perform Work. Reviewed Sub- Contractors QA/QC Plans for Acceptance
For Mechanical, Electrical, and Civil work for the project. Scheduled all NDE Activies for Mechanical, Civil and Electrical Testing. Conduct Quality Audits for Compliance to Project and Fluor Requirements.
Conduct Training, Qualification and Certification of Field Personnel, Review all Site and Shop Drawings
For Correct Specifications for the Project with the Fluor Engineers for acceptance or rejection, and issue comments back to sub-contractors for Resubmittal to Fluor for Acceptance. Further Responsibilties include the Supervision of Fluor Inspection Personnel, and Conducting routine inspections and surveillance of construction work activities as required to achieve contract Quality Requirements PER: ASME: B31.1, ACI-301, AWSD1.1, and ASME SEC: IX

FLUOR DANIEL
APRIL-2005 to MAY-2005
QA/QC MANAGER
PROGRESS ENERGY
SUTTON PLANT
WILMINGTON, N.C.

Perform Quality surveillance & visual inspections for the 1 month outage of the #3 Boiler tube replacements for code compliance. Duties included Managing 24 welders and 24 pipe fitters for the day and night shift. Scheduling and monitoring of all work activities and visual inspection of 209 tube welds, weld mapping and scheduling all NDE act ivies and final sign off of R-1 reports with the Authorized Inspector.

FLUOR ARABIA LTD.
DEC-2004 to APRIL - 2005
QA/QC MANAGER
YANPET-DBN-1 PROJECT
YANBU, SAUDI ARABIA

Construction Management Project:
Responsible for Management of the QA/QC Program for the YEP-DBN-1 De-Bottlenecking outage.
Reviewed the QA/QC plans for Acceptance for all contractors involved in the outage, from WPS's & PQR'S for welding to inspection & test plans for Mechanical, Electrical, and Civil activities.
Responsible for the implementation of the ASME Quality Program including welding and NDE activities.
Further responsibilities included the Supervision of Fluor inspection personnel, and conducting routine inspections and surveillance of construction work activities as required to achieve contract Quality requirements.

FLUOR FEDERAL SERVICES
JULY-2004 to DECEMBER- 2004
QA/QC & SAFETY MANAGER..
CETAC II MANAS AIR BASE
TEMPORARY CANTONMENT PROJECT
BISHKEK, KYRGYZSTAN

Construction Management Project:
Establish a Quality Control & Safety Program for (USACE) and (USAF) for a Permanent housing project for APP:1,000 Military personal, Review Contractors QA/QC plans for Mechanical, Civil and Electrical for Acceptance. Review All Site and Shop drawing and USACE Specifications for the project with the Fluor Engineers in Greenville,S.C. for acceptance or rejection, and issue comments back to Sub Contractors for resubmittal to Fluor for acceptance.
DATA entry in PROLOG of all Submittal items from sub contractors, Materials, Drawings, Specifications Equipment, Concrete Mix Designs, Asphalt Mix Designs, Low Voltage & High Voltage Designs and ECT. Once the Submittals are accepted by Myself and Fluor Engineers they are then submitted through PROLOG to United States Army Core of Engineers for Approval.

FLUOR /FEDERAL SERVICES
FEB-2004 TO MAY-2004 MGR.
QA/QC MGR.
OPERATION IRAQI FREEDOM
CAMP COOKE/TAJI, IRAQ

Construction Management Project
Duties included, Site Engineering MGR. & QA/QC MGR. and Contract Manager for 5 Major contractors for the 2,451 units of permanent housing for the U.S. ARMY in IRAQ. Review and accept contractors QA/QC plans for Mechanical and Civil work for the project. Testing Activities Per: British and ASTM standards for Asphalt and Sieve Analysis of Aggregates for base coarse material and CBR testing prior to Asphalt placement.
Mechanical activities PER: ASME & British standards for all plumbing and under ground piping installations. Reviewed all contractors daily reports and testing actives PER: FLUOR Specifications for the project, Issued some NCR'S where needed to contractors, submitted weekly reports back to Greenville, S.C. for review on each weeks progress. Total contract for the 5 contractors was over $100.million

FLUOR/FEDERAL SERVICES
OCTOBER-2003 –DECEMBER-2003
QUALITY ENGINEER
OPERATION IRAQI FREEDOM

Construction Management Project
Traveled to 5 Middle East countries and 3 East Europe countries to visit 15 different contractors for a $100 million dollar project for the USAF in IRAQ for 2,451 units of permanent housing for 10,000 military personal in several different sites in IRAG. The Purpose of the visit was to look at the contractors on FLUORS bid list to verifey their specifications for building of the housing verses U.S. specifications and for a over all QUALITY ASSURENCE look at fabrication of these Contractors Facilities and return to GREENVILLE, S.C. in December to review the bids verses my visit to all of these contractors and award the contracts to 5 of the contractors.

FLUOR/FEDERAL SERVICES
NOVEMBER 2002 – OCT-2003:
QA/QC & SITE ENGINEERING MGR.
OPERATION ENDURING FREEDOM
OPERATION IRAQI FREEDOM
THUMRAIT, AIR BASE, OMAN

Construction Management Project:
Establish and Supervise a Engineering & Quality program for the (USAF) for a (2,080ft) x (980ft) concrete parking ramp for USAF's B-1 Bombers and a (14,000ft) x (100ft) Asphalt parallel taxi way to the exiting OMANTI airport runway. The project consisted of ASTM & BRITISH STANDARDS. The Concrete parking ramp was a combination of both ASTM & British standards for 5,500-psi concrete. Direct magament of three contractors, OMAN GULF, L.L.C. Thumrait Oman, Asphalt plant and Aggregates for both concrete and asphalt & base coarse materials. READYMIX ABU DHABI, ABU DHABI,U.A.E. for the concrete plant operation, reviewed and accepted their mix designs for each operation & QA/QC plans for testing and sampling of aggregates on a daily and weekly basis for compliance to site specifications for ASTM, BRITISH STANDARDS. Third party material testing: TARMAC ALAWI, L.L.C. Muscat Oman, reviewed & accepted their QA/QC plan, scheduled all testing of Concrete, Asphalt, Sub-base, & base coarse material PER: ASTM & BRITISH STANDARDS. Testing activies, Sieve analysis of aggregates, Slump testing of concrete, air-entrainment, compressive strength of concrete cylinders & beams.
Asphalt: Daily extraction method, for bitumen content, voids in mix, specific gravity, and sieve analysis of aggregate after extraction & field (CBR) testing. Contracts manager for 3 Civil contractors total contract award for 3 contractors was $67.million

DUKE/FLUOR DANIEL
FEBRUARY 2002-NOVEMBER 2002
QUALITY ENGINEER
DEMING ENERGY FACILITY, DEMING, NEW MEXIC0

Construction Management Project:
Established and Supervised a Quality Assurance program and record keeping system for a 450 MW: CO –Generation Facility to meet the requirments of ISO 9000 in the following areas civil, mechanical, piping and welding. Reviewed all site work packages and generated weld instructions to sub- contractors to ensure code and site compliance as this was a construction management project. Contract Manager over two major contractors for Project mechanical & electrical total of two contractors was $247. Million.

DUKE/FLUOR DANIEL
March 2001 – FEBRUARY 2002
Quality Engineer Construction Manager
Urquhart Repowering Project, Beech Island, South Carolina

Generated all ASME weld travelers required for ASME Section I work for 450 MW Co-Generation Facility. Contacted and scheduled weekly visits with Site (AI). Performed daily weld inspections and assisted craft and engineering in technical areas related to HRSG'S and welding. Assisted other inspectors in daily activities related to high energy piping (PWHT, XRAY, Pre-Heat, etc.) Monitored sub-contractors to ensure a quality product was given to SCE&G at job completion, Tank Fabricator, Painters, and Insulators. Witnessed Hydrostatic testing of piping systems. Night Shift Construction Manager /supervised all activities for Piping, Electrical, Civil., and sub-contractors for 6 months.
Performed shop visits to local pipe fabrication shops when required to ensure quality and schedules were being met.

DUKE/FLUOR DANIEL
April 2000 – February 2001
Quality Engineer/Nightshift Construction MGR.
Odessa -Ector Power Project, Odessa, Texas

Responsible for NDE and welding activities for new 1,000MW co-generation facility. Establish and supervise a quality control program meeting ANSI B31.1, B31.3 and AWS.D1.1 requirements. Review and identify site-welding requirements to ensure code compliance. Schedule work on all NDE sub-contractors. Ensure appropriate ASME code certification of all sub-contractors. Monitor Duke/Fluor Daniel and all sub-contractors for weld rejections and appropriate corrective actions to maintain an acceptable rejection rate. System walk down and punch out to ensure systems are complete and fabricated per P&ID and current drawings.
Construction Manager/Quality Engineer Nightshift for 6 months Supervised Duke Fluor Daniel and All Sub Contracrors for Mechanical, Electrical & Civil Activities for the Project.

FLUOR DANIEL
October 1999 – December 1999
Quality Engineer
Proctor & Gamble, Jackson, Missouri

Perform visual welding inspections of piping systems for compliance to applicable codes and job specifications. Coordinate activities of NDE sub-contractors. Weld map systems to assure necessary NDE is completed prior to hydro testing and clear packages for hydro testing.

FLUOR DANIEL
June 1999 – October 1999
MECHANICAL ENGINEER/Quality Engineer II
S.K. Corporation, Ulsan, Korea

Perform quality surveillance and monitoring of construction work for code compliance. The work included inspection of piping, welding, structural steel, mechanical and vendor's shops. Reviewed radiographic film for compliance to applicable codes. This was a construction management job.

FLUOR DANIEL
March 1998 – May 1998
QUALITY ENGINEER II
Union Carbide, Taft, Louisiana

Responsible for QA/QC NDE and welding activities for new Olefins Modification Project. Activities include welder qualification testing of all Fluor Daniel and sub-contractors per ASME Section IX & B31.3 and AWS D1.1 welding specifications. Review all sub-contractors welding procedures for approval. Schedule NDE contractors for RT, PT and UT inspection, per ASME B31.3 compliance. Review site welding requirements to ensure code compliance to B31.3 and AWS D1.1. Preparation of Quality documentation and daily activities reports. Monitor Fluor Daniel and sub-contractors work force for weld rejections and appropriate corrective actions to maintain an acceptable rejection rate.

FLUOR DANIEL
December 1997 – March 1998
QUALITY ENGINEER II
Wellman Plastics, Inc., Bay St. Louis, Missouri

Responsible for all welding and mechanical inspections related to Fluor Daniel and sub-contractors for Wellman Project. Other activities and responsibilities included pre-hydro walk downs and acceptance as per ASME B31.1. Final P&ID walk down of piping systems and punch listing prior to turnover to Wellman. Also review for approval welding procedures for sub-contractors and off site vendors.

FLUOR DANIEL
January 1997 – September 1997
MECHANICAL ENGINEER/QUALITY COORDINATOR
EQUATE Petrochemical Complex, Ahmadi, Kuwait

Lead inspector responsible for coordinating and overseeing all inspections and activities of 19 Fluor Daniel Inspectors. Witnessed all hydrostatic, pneumatic and flushing inspections. Review test reports to ensure accuracy and address any discrepancies before final turnover to EQUATE. System walk down and punch out to ensure all lines are complete and fabricated per P&ID and isometric drawings. Daily field inspections and observations of all ongoing mechanical work.

FLUOR DANIEL
August 1996 – December 1996
QUALITY ENGINEER II
Shell Chemical, Norco, Louisiana

Quality supervisor on night shift. Review site welding requirements to ensure code compliance to B31.1, B31.3 and AWS D1.1.a. Performed visual and NDE inspections on piping components for F-140 furnace & debottlenecking shutdown. Monitor Fluor Daniel work force for weld rejections and appropriate corrective actions to maintain an acceptable rejection rate. Supervise over weld tracking program on night shift. Worked hands-on with engineers on all problem areas and weld test shop supervisor.

FLUOR DANIEL
April 1996 – May 1996
QUALITY ENGINEER II
Rohm & Haas Chemical, Deer Park, Texas

Weld test shop supervisor on night shift, performed visual & NDE testing PT and UT on all project piping during shutdown. Inspections of all mechanical work for shutdown and pre-shutdown work. Scheduled all NDE work for sub-contractors. Review site welding requirements to ensure code compliance to B31.1.

FLUOR DANIEL
May 1995 – May 1996
QA/QC Manager
Chevron USA, El Segundo, California

Quality Manager in charge of a 48MW Co-generation facility. Establish and supervise a quality control program meeting ANSI B31.1, ANSI B31.3 and AWS D1.1 requirements. Review and identify site-welding requirements to ensure code compliance. Schedules work for all NDE sub-contractors. Worked with project management and client to resolve and correct problem areas. Ensure appropriate ASME code certification of all sub-contractor welders. Monitor Fluor Daniel and General Electric work force for weld rejections and appropriate corrective actions to maintain an acceptable rejection rate. Solely responsible for all civil and mechanical quality compliance.

FLUOR DANIEL
1994 – 1995
QA/QC MANAGER
Unocal, Wilmington, California

Establish and supervise a quality control program meeting ANSI B31.1, B31.3 and AWS D1.1 requirements. Review and identify site-welding requirements to ensure code compliance. Schedule work for all NDE sub-contractors; work with project management and client to resolve problem areas. Ensure appropriate ASME code certification of all sub-contractor welders. Monitor Fluor Daniel work force for weld rejections and appropriate corrective actions to maintain an acceptable rejection rate.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 651 to 700 of 1341)Go to Search Parameters...
Brief Description
IOSH Managing Safely (UK Certification)
Industrial Electrician by trade who is now working as a Commissioning Operations Maintainer in Explosives and LNG facilities.
Supervised main LNG works from Administration and Utility Area
A qualified engineer with an exceptional and extensive track record in managing large maintenance infrastructures systems for diverse industrial setups
37 year old man seek an employment or contract off-shore as a roustabout, mechanic, motorman, fitter or welder
A technocrat with proven experience in the filelds of Marketing and business development, general management of multinational Industrerial valves manufacturing organizationas with an experince of 14 years.
* PROJECT / PROGRAM MANAGEMENT * OPERATIONS * ENGINEERING *
24 years in oilfiled \ Safety Rep.\ EMT
Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.
Firefighter, Search and Rescue Instructor, Safety Instructor, First Aid Instructor, Emergency Response Coordinator, Team Leader, Crew Chief,
A time served Instrument Technician with over 5 years experience as a Production Technician/Control Room Operator on an operational production installation, and as part of the operations team on a major project.
I am a machinist by trade, got into service tech., then field machining and enjoyed it.
MECHANIC/WELDER/GENERAL MAINTENANCE & REPAIRS
BSc, 10 years field/management experience in pipeline integrity, pipeline inspection, direct assessment, risk models, project management, surveys, non destructive testing etc.
Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors
I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste
My skills make me a leader no matter what job or position, I'm successful........thanks!
Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization
Journeyman Electrician
The last ten years I worked as full time machinist, production supervisor/fitter, and maintenance supervisor hands on, technician/ supervisor in heavy mining and industrial environment.
Expertise in Project Engineering, Cadd Management & related fields.
Fully experienced HSE Coordinator,Supervisor,Advisor comfortable in Oil&Gas,Construction and Military environments
Previous warehouse work..good hard worker ,fast learner
•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India
Allen Bradley Processor Class- Certificate, Siemens Processor Class-Certificate, GE Processor Training- Certificate, First Aid/ CPR, Microsoft Excel training Class, Arc Flash Training, SAP, MP2, MS Project
A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.
Senior Business Analyst, Derivatives, Commodities, Energy, Swaps, Equity, Openlink Endur, Triple Point, Zai*Net, Allegro, Sungard
welding of pressure/vacuum vessels, fabrication of heavy plant and machienery
33 years Mechanical & Civil Exp in QA/QC & Construction Management form$65.Million to $3.2 Million Projects. EXP. All Codes , ASME, B31.1 B31.3 AWS, , NBIC, ASME Sec.V, ASME Sec.VIII API-650 &653. Develope & writing QA/QC Programs, Site procedures Manuals, Project exection plans & Welding plans
Bilingual; Work indepenently; Hardworker; Computer profficient;Honest; Reliable
• Masters Degree in chemistry, University of Madras, Chennai, India (April, 1995) • Bachelors Degree in Chemistry, University of Madras, Chennai, India (April, 1992)
More than 20 years E&I experience of Maintenance & Commissioning within the Oil & Gas Industry. Enjoy working as part of a team but I can also operate independently when required. Self-motivated, resourceful, adapt quickly to new working environments, easily integrate into multi-cultural operations
Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,
Buyer, Purchasing Agent, 38 Yrs. Material Handling and Purchasing Experience
Automation/Electrical/Instrumentation/Supervisor
Seven years experience in quality control and quality assurance, welding inspection, Nondestructive tests (RT, UT, PT& MT),destructive tests (tensile,bend,hardness, macroscopic, impact, corrosion,...), in the fields of (Pressure Vessels,Boilers,piping, steel structure , tanks & Pipelines) at gas &
Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.
EDP Data Management and System Analyst
I want to start working on a Oil Rig as a Roustabout and work my way up. I am willing to make a long term commitment and pursue this career for as long as possible. I want gain enough experience to become a Driller.
Trad qualified Fitter and Turner with extensive experience in the repair and maintenence of pumps and pumping equipment.
Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman
Mechanic/Welder Field, shop, underground
Rotating & reciprocating equipment technician
Specialise in safety valve and Gas Litf and also wireline operator in Malaysia
Lease Records Analyst
I am aged 27years and diploma holder in fire fighting Engineering, and have 2years experience in safty feild
I am a CCO crane operator willing to travel.
T/A Siemens, Kawasaki, GE, Solar Turbines, Startup Manager, Operations, Combine Cycle
Experienced Project Manager/ QC / Controls Manager
I have completed my M.Sc in Ecology & Environmental Science from Sikkim Manipal University and have PG Diploma in Petroleum Exploration & production from POGL institute of petroleum & Energy Development, Guwahati, Assam. Moreover, I have completed thirty days field training in Drilling and exposed
1   2   3   4   5   6   7   8   9   10   11   12   13   [ 14 ]   15   16   17   18   19   20   21   22   23   24   25   26   27  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com