Resume - quality control / quality assurance

Misco Jobs

Resume #66913

CONTACT INFORMATION:
View contact information...

Objective:
To obtain stable employment with your company, while further developing skills required to keep with the changing standards of the industry.

Current certifications:
Level II Radiographic Film Interpretation
Level II Ultrasonic Testing (limited to thickness)
Level II Magnetic Particle Testing
Level II Liquid Penetrant testing
Level II Visual Inspection

Background:
My career began as a combination welder. I turned my interest to inspection and began performing nondestructive testing. I was then offered an opportunity in the field of quality control. I am currently holding the position of Quality Assurance/ Quality Control Manager.

Experience:
Shaw Maintenance 9/2005 – current
1241 Underwood Rd.
Laporte, Texas
Title: Qa/Qc manager
Responsibilities:
Coordination and management of pipe and vessel shop Qa/Qc department.
Interpretation of applicable codes and standards assuring projects meet the required specifications of the client as well as the industry. Preparation and issuance of required welding procedures, welder testing, film interpretation, visual inspections and supervision of shop inspectors, responsible for all document control, required testing and customer required data.

Mueller Environmental Designs 01/2005 – 08/2005
7406 Wright Rd.
Houston, Texas
Title: QA/QC inspector
Responsibilities:
Vendor surveillance of numerous fabrication facilities for construction of various silencers, vessels, and other contracted jobs. I interpreted blueprints, troubleshoot problems associated with the construction of our equipment, this is a "turn key" company which required inspection for fabrication dimensional, final acceptance as well as coatings.

H.B. Zachry construction corp. 02/2000 – 01/2005
1243 Underwood Rd.
Laporte, Texas
Title: Quality control Inspector
Responsibilities: Maintenance and turnaround construction of various sizes and locations. I was responsible for all phases of QA/Qc functions including scheduling and documentation of all N.D.T. as well as any outside vendor construction.

Performance Contractors 11/1997 - 01/2000
104 Peceune Lane
Baton Rouge, La.
Title: Quality control manager
Responsibilities: coordination and management of all turnaround phases of quality control assuring all applicable codes and clients' specifications are adhered. scheduling of required testing, document control, status reports, and welder testing.

Petroleum Industrial Inspectors 06/1993 – 11/1997
64117 Tidwell
Houston, Texas
Title: N.D.T. Inspector
Responsibilities: all phases of non destructive testing required by customer.RT,Pt,UTT,MT,VT
Also welder testing and all required documentation.

Brown and Root Const. 04/1991 – 06/1993
Clinton drive
Houston, Texas
Title combination welder
Responsibilities: welding of various materials using all processes of welding

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1338)

Go to Search Parameters...

Brief Description

19 years experience in Jet Aircraft and Engine Maintenance

Application for the post of WELDER

Acting Fire Station Commander /Senior Fire Fighter / Amublance Assistant

Professional Heavy Duty Mechanic with leadeship and overseas experience seeks full-time or contract position with a well respected organization anywhere in the world.

High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE.

MILLWRIGHT

With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I have strong organizational and people skills. I communicate well with the craft and customer, both written and verbally, I am also computer literate.

Applying Insulation and Sheet metal Cladding.

Skills are; mechanic, HVAC, heavy equipment etc.

Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.

Wellsite supervision -specializing in drilling supervision

Mechanical Supervisor, offshore, FPSO experience.

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

Electrician with over ten years of experience

Millwright/Safety

i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences.

Senior directional drilling supervisor.

Experienced, over 10 years as an instrument control technician commissioning start-up Hydro carbon, fertilizer and petrochemicals plants

I have extensive oilfield service experience in frac,cement and nitrogen operating in Prudhoe Bay,Alaska.Dewatering using both centrifuge and clarifier.I have been a frac supervisor and field coordinator.Just received mud engineering certificate.

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

Onshore and offshore crane operator

Extensive experience in the Electric Sumbersible Pump Industry

18 years of experience as a Senior Rotating Equipments Specialist. Specialized in the installation, commissioning, inspection, diagnosis, troubleshooting, refurbishment and maintenance of turbo machineries of major manufacturers used in Petroleum refineries, Petrochemical plants, Fertilizer complex

Working in oil refinery qatar since 2000 as a general technician electrical maintenance.

Nace 1 Coatings Inspector

I am seeking a long term employment contract within a company that would offer advancement, a good starting wage, and benefits.

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Eskom, De Beers Mine, Municipality and Spoornet is the companies that help me build up my career. With all my electrical skills and knowledge I can only be a profit to your company. My positive attitude to my work is the cause of my good safety record.

Senior Civil / Structural Designer

quality control / quality assurance

I have a wide knowledge of on & offshore,gas, petrochemical and marine electrical systems.this knowledge and experience in conjunction with my professional qualifications combine to offer any potential employer the benefits of a well rounded and knowledgeable individual. Valid 4 Year Australian Visa

To utilize my broad skills and experience in offshore and onshore oil and gas installation for process control instrumentation and electrical maintenance.

Objective Employment with a company desirous of a dedicated, hard working, creative, team player, offering 25 years of experience in the Instrumentation field.

Resume for employment

The computer skills I have apply primarily to Landmark (Unix, SunSolaris, Oracle) and Kingdom (SMT) seismic workstations. I am proficient with most PC applications as well. My work history is stable and I have good references.

Seeking a position as a driller where my experience, training, loyalty and good work habits will be an asset to your company. I have over 27 years of oilfield experience offshore and on land with expertise in the following: supervision, operations, trouble shooting, safety and derricks.

Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Certified Drilling Fluids Engineer with extensive knowledge of oil field operations and experience working with oil wells, and well maintenance

Well services Supervisor

Rolls Royce Diesel Engine Fitter & Safety Supervisor

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

Piping supervisor. on & offshore construction/maintenance

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out