Resume - Total 7 years experience in the oil and gas field(2 years gulf exp) .and have ...

Misco Jobs

Resume #67276

CONTACT INFORMATION:
View contact information...

Objective:
Seeking a career in the field of Instrumentation and On line Analyzer system. Considering my seven years experience in the oil and gas field

Working Experience:

2007 August to till date: working as a Sr Analyzer Technician in TYCO Qatar for DOLPHIN ENERGY in their new Natural Gas Process Plant in Qatar

Job responsibilities
* Commissioning and Trouble shooting
* Schedule preparation and execution of preventive maintenance and corrective maintenance of analyzers and swas system
* Calibration Validation and trouble shooting of analyzers
* Under gone training with Emerson for Analyzers
* Documentation of calibration format, calibration reports and test certificates

2006 February to August: Worked as an E&I Supervisor in M/S UNITED ENGINEERING PROJECTS for OCCIDENTAL INC for their oil field projects in MUKHAIZNA in OMAN.

* Job responsibilities includes work execution on site
* Man power handling and completion of job in time
* Co-ordinate with relevant departments to obtain work permit and carry out the job safely as per OCCIDENTAL regulations& strictures.

Projects:

* Water Treatment (RO) and Boiler Plant to supply steam for wellhead Steam Injection

2005 November to December 2006: Worked as an Instrument Technician in
Kuwait Oil Company Maintenance Project (Bader Al Mulla).

* Job responsibilities includes of Installation preventive maintenance, corrective maintenance, break down, functional checks and calibration of Process and Fire & Gas detection Instruments in Gathering centers, Booster stations, Water injection plants, Substations and pumping stations.
* Under gone training with General Monitors of USA for Fire & Gas Detection systems.
* Co-ordinate with revelent departments to obtain work permit and carry out the job safely as per KOC regulations& strictures.

2003 September to 2005 September M/S Offshore Constructions LTD India (ONGC Process Platforms Mumbai High and Bassien field) Worked as an Instrument Technician.

* Job responsibilities of maintaining and calibration and pre commissioning activities of field Instruments and Fire and Gas detection Instruments.
* Routine maintenance and calibration of Instruments and Detectors
* Periodic calibration and Loop checking.

Projects:
* Mumbai Port Trust's Marine Oil Terminal Project
* Reconstruction Of BPA Plat form Bassien field

2001 June to 2003 July M/S Gayathri Enterprises (Calibration Laboratory) India Worked as an Instrument &Analyzer Technician

* Job responsibility Commissioning of process control and Analyzer Instruments in Off shore Process platforms in mumbai High and pharmaceutical Industries
* Periodic calibration, Validation and Certification of Analyzers and instruments in Process and pharmaceutical plants.

Clients Interacted with:

Dolphin Energy Qatar, Occidental oman,KOC Kuwait, Oil and Natural Gas Corperation, Larsen & Toubro, Mumbai Port Trust.

Proficiency:

* Installation, Hook up and Pre- Commissioning
* Good experience in SWAS maintaining and schedule planning of PM, CM of Analyzers and F&G Detection instruments
* Calibration Validation of Analyzers and Instruments
* Worked with Analyzers of following make Emerson, Ametek,Siemens,Panametrics,Analytical instruments,Hiach
* Worked with transmitters of following companies Rosemount,Yokogava,Siemens
* Fire & GasDetectors Of General Monitors, Detronics, Sieger,Crowcon,Detcon
* Documentation of calibration format, calibration reports and test certificates.
* Familiar with following certifications BVIS,EIL and CEIL
* Experience with control systems like: - Honeywell-TDC 3000, Foxboro Triplex and Fisher Rosemount I/A series.

Analyzers Gas Chromato Graph (FID,FPD,TCD, TCD+FID), pH, Conductivity, NOX, O2, Dissolved O2, Concentration, Sulpher,HC in water,TOC,Moisture,Density FreeCl,
Gauges Temperature, Pressure, Vacuum, Differential
Transmitters Pressure, Absolute, Differentials Pressure, Temperature, Flow, Smart, Level(Differential and Interface)
Controllers PID, Cascade,
Valves Control Valves, shut off Valves, Relief valves, On off valves, Valve positioners
Sensors and Detectors Toxic and Combustible Gas Detectors, Sensors, UV/IR Flame and Gas Detectors
Switches Pressure, Vaccum,Temperature

Educational Qualification

* Secondary School Certificate
* Diploma in Electronics & Telecommunication

Computer Proficiency

* Experience in MS office

Personal Details:

Father Name: R. Balakrishna Pillai
Date of Birth: 10-01-1981
Passport No: E8898115
Date Of Expiry: 20-05-2014
Permanent Address: Poovappallil (house)
Peennukkara (po)
Chengannur
Kerala
India 689520
Phone: 0091-4792368532
Phone (Qatar): 00974-526785

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1344)

Go to Search Parameters...

Brief Description

Proficient in managing reciprocating and rotating equipment maintenance, supervising general servicing, overhaul, installation, commissioning and troubleshooting of this equipment, ability to set up and operate CMMS programs

I have over 20 years experience as a Welder/Fitter. The majority of my experience is in the Oil & Gas Industry. I am willing to relocate and/or travel.

25+ years in the pharmaceutical, chemical and petroleum industries as an instrumentation technician. Willing to travel.

I am experience Electrical Instructor who has worked for most of the major Oil and Gas companies. I have experience as both a classroom, On the job trainer and NVQ Assessor. My work experience covers the following areas Middle East, Far East and Africa.

Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Experienced Instrument and Control Technician, with more than 20-year hands-on work experience. My experience covers working for Petroleum Refineries, Petrochemical facilities and Offshore oil/gas production facilities.

Offshore Operations, Safety, Accommodation Refurbishments, Inspections

Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa.

For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas

25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections

Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal

ONSHORE-20 Years. Set-up and supervise Mechanical Operations & Maintenance duties. OFFSHORE PLATFORM-4 years. Oil & Gas offshore Platforms Maintenance instruction to Maintenance staff. Identify and control all replacement spares and equipment of all offshore plant and equipment.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

I have been employed in the oil and gas industry for over 20 years, 12 overseas. Supplemented by formal training, my career has enabled me to develop expertise in a wide variety of mechanical, technical, and organizational staff and work management areas.

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field.

I'm a USN Veteran Electrician with a solid background of electronics. I'm a self starter, and I have been working for myself on/off during the last year as a contract labor electrician. At this time I'm working for myself doing electrical jobs for Coastal Drilling in Corpus Christi, Texas.

A Technical personnel willing to relocate and learn and be involved in a new working environment. Can perform PC and LAN troubleshooting, installation, maintenance and configuration.

Senior directional driller

Heavy Earthmoving Equipment Mechanic

Total 7 years experience in the oil and gas field(2 years gulf exp) .and have good experience in field analyzers including gas chromato graphs ,field instruments and fire &gas detection instruments. able to work independently in hook up, pre commisioning,commissioning and Maintenance of above ins

I want to work as Instrument Foreman/ Technician with good knowledge and experience in Process Instrumentation in Power plant and Desalination Plants.

Maintenance, troubleshooting, and repairs @ plants, boosters, etc.

My qualifications appear to be in line with your requirements: - Over fourteen years of successful experience - Extensive experience with PDS, Plant view, Micro station and AutoCAD software - Strong background as a Lead and Senior Designer

14 years Oil & Gas Industry experience in electrical maintenance, Low Voltage and High Voltage, normal and hazardous areas, on-shore and off-shore, grounding systems, UPS´s , PLC´s, engines ignition systems, heat tracing, HVAC. General acknowledge in Process and Instrumentation.

Have substantial supervisory experience in the maintenance of Heavy equipment, work well with in a team. My leadership skills are excellent and I have very good communication skills. Computer literacy is very proficient.

* 25+ YEARS EXPERIENCE IN THE OIL & GAS INDUSTRY * PAST MANAGMENT POSITIONS * CERTIFIED INSTRUCTOR OF VARIOUS SAFETY COURSES

Drill Stem Testing, Downhole Tool Supervision, Packers, Open-hole, Cased-hole, Driller, 4-Point Testing, Heavy Industrial Manufacturing, Computers, etc. These are just some of the areas in which I have a solid background in.

I am a Journeyman Heavy Duty Mechanic with supervisory experience. I am looking for overseas employment preferably contract work. I have some computer skills which include MS word, excel, access. I have developed and implemented preventive maintenance programs which proved very successful.

Extensive Oilfield knowledge and experience in all categories of more than 20 years. Worked offshore for the last 15 years as a crane operator but am not limited to that.

I`m seeking employment overseas and have extensive experience as a Heavy Duty Mechanic.

Certified ASME welder, First Aid and CPR. Military veteran. In-depth experience with supervision and management. Experienced with heavy machinery, vehicles, electrics, hydraulics, plumbing, fabrication, offshore welder on a jack-up ship, shipfitter, hardware retail and laundry machine repair.

I have received recognition for my personal work Ethics and I work well with people. I'm looking for employment in the Diving industry or Offshore Drilling Rigs. I believe I have good broad range of skills that may of value to an Employer.

Available 7/7 days as I'm single. Free like a bird. Highly self-motivated, open minded, easy communication with people, dynamic, patient, courageous, sense of initiavtive, responsible, and persistent.

24 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment Specialist, in both Gas Compression and Liquids Sh

Business Development, Sales, Marketing, Procurement, Supply Chain, IT, Process Control, Rig spare parts, subsea, pump, valve, safety equipment, engineering services, E&I, SAP

Accomplished boilermaker/welder. My recent jobs have included high pressure pipe welding, building one gigawatt wind field towers, new ski lifts and towers, in addition to retrofitting older ones.

Highly motivated candidate with geochemistry background, looking for first job in industry. Excellent computer and communication skills.

Engineering graduate with MBA having about 2 decades of experience in developing and administering Contracts in Oil& Gas, Petrochemical and Engineering fields. Skills include Strategy development, Risk analysis, develop Contract documents, Evaluation/negotiation and award, Contract management.

MBA Finance, Basicaly technically minded person having all rounder capbilities

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

Crane Operator / Deck foreman Rigger

Hold mater unlimited license 3000 GT. Certified rig move master by John Lebhourihis and associates.Offshore experience 19.5 years on 3 independent jack ups as barge captain.Experienced in ship's hull and preload tanks steel repairs

Re: Application for Employment as a Roustabout/ Roughneck I am willing to start at the bottom and work my way up within your organisation. I am prepared to work anywhere in the world.

Industrial, commercial electrician. Licensed Master Electrician - Colorado Licensed Journeyman Electrician - Alaska

Licensed Journeyman welder, Interprovincial Red Seal attained. Alberta B Pressure WCB registered F3/F4 qualified, 4-position flux core (Flat, vertical, horizontal, ovehead), CSTS

1:HSE. 2:NCTVT in Electrical.3: NAC in Electrical.4:'B' Grade Electrical license holder.5:Certificate course in Auto Cad software.6:Certificate course in Auto Cad software.7:Integrated Course in personal survival Technique, Emergency first aid courses.8:Certificate course in Fire prevention and prot

Documentum 5.3, DDMS (Digital Document Management System), Electronic Filing System, Library Automation, Develop Library Web Page through Frantpage, Develop Information Portal In-house

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out