Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #68383 next resume »» CONTACT INFORMATION: View contact information... KEY COMPETENCIES *Petroleum Laboratory management *Setting up, adjusting and operating laboratory equipments *Control processes in laboratory and bench scale *Special and conventional core analysis. Coreflooding Studies *Water/Gas and chemical flooding to IOR/EOR projects. *Formation Damage and Heavy oil enhancing *Strong Knowledge of Organic Chemistry *Chemical formulations development *Physical chemistry of polymers & surfactants *Technical support in onshore/offshore operations *Field/plant production fluids Samplings *Handling/Treatment/Separation of oil/water samples. *Knowledge of standards ISO-9000/ISO-14000 *Promotion of chemical products. *QC/ Chemical analysis by ASTM/API Methods, UV-Visible spectrometry and HPLC. PROFESIONAL EXPERIENCE 2005 –2007 (Present) Neotechnology, C.A, Venezuela – Germany Laboratory & Field Chemist * Coordinate and perform laboratory studies to evaluate new technologies to enhance oil & gas production. Evaluation of chemical formulations to sand control involving the following technical parameters: Porosity, Permeability retention, pore volume optimization, injection rate, proppant types, temperatures, pore pressure, initial fluid saturation, confinement pressure, fluids compatibility in aqueous and non aqueous systems, chemical preflush, among others. Treatment and separation of oil water samples. Fluids rheology * Develop rock specimens under P/T controlled conditions to evaluate curing time, type of chemical formulations and evaluate mechanical properties through UCS and PLT. * Evaluate gelling time in static and dynamic conditions using different starters of polymerization. * Design and set up equipment to evaluate different processes at reservoir conditions. Maintenance and calibration of laboratory equipments. Calibration gauges, transducers, high-pressure syringe pumps. * Serve as a sale representative promoting chemical products * Design of methodologies -standard operating procedures (SOPs)-state of the art studies 2003/2005 Universidad Central de Venezuela, Petroleum engineering faculty. Technical Support Chemist * Responsible for the reactivation of the PVT laboratory. Maintenance and calibration of PVT equipments: Blind liquid phase PVT Cell and volatile/condensate fluids cell. (Compressibility up to 8000 psi). Calibration of rolling ball and Brookfield viscosimeters * Served as technical support to undergraduate students & technicians in the reservoir rock and fluid properties laboratories from petroleum engineering faculty. Water/sediments, air/water permeability, porosity, fluids saturation, capillary pressure and ASTM/API methods. * Worked in an experimental methodology to eliminate phenol from phenolic wastewater effluents of a naftenic acid plant by a laboratory ozonation system. 1989/2003 Research Centre of PDVSA-INTEVEP, Venezuela: Advanced professional II; Activity Leader for La Salina project and Professional I, Laboratory and activity coordinator for Lagomar project. Offshore projects. 1996/2002, * Designed, organized and performed laboratory activities to establish alkali-surfactant-polymer (ASP) formulations to the reservoirs LL-03 and VLA 6/9/21, involving fluids characterization, conventional and special core studies. Fluids studies involved: phase behavior to oil-water-surfactant systems, optimum polymer concentration, critical micelar concentration and ultra low interfacial tension to surfactants. Rheological behavior, molecular weight effects, thermal stability (bottle tests, anaerobic chamber), fluids compatibility, solubility, interfacial phenomena and compatibility of polyelectrolytes and additives in formation, injection and soft water. Evaluated Antiscalants. Conducted Coretestings and Fluid-rock interactions tests: chemical retention, Absolute and relative permeability, capillary pressure, wettability, porosity, pore volume and oil recovery. * Studied the surfactant/polymer interactions by rheology and tensiometry. * Contributed to the technological risk analysis for an ASP full field application and worked as a part of a team to generate a pilot design to determine the effect of gas lift on the produced fluids and the effect of the transport of injected blends on the viscosity at the experimental well "CEPRO" * Coordinated and oversaw the quality control and preparation of whole slug of ASP injected in the well 1325, during the pilot test "SWCT" to evaluate the efficiency of ASP process in Lagomar field (offshore). On-site inspection of the barge facilities to evaluate mixers and tanks integrity. Installation of equipments required to monitor and ensure the quality of the polymer and surfactant blends, previous the pilot test * Performed water/oil separation in the field using portable separator and demulsifiers. Oil and water (Brine) tests by ASTM, API and SMWW methods. * Analyzed asphaltenes content, water and sediment content in crude oil by (ASTM 4007-02, API MPMS Ch. 10.3/10.2), density, specific and API gravity, carbonates and bicarbonates in brines (Alkalinity), chlorides, total dissolved and total suspended solids in brines. * Served as a technical support in project "Exploitation and unconventional uses of heavy and extra heavy oils" to demonstrate the cracking and hydrogenation of heavy oil by electrochemical treatment. * Technical support during the injection and sampling of tracers in the Lagomar field. * Supported the preparation, mixed and injection of emulsions with heavy oil at the FN-2 well, Furrial field. Associated Research Technician III (Field technician) to both Projects "Support to the Integrated Studies to the fields: Centrolago (offshore) and El Furrial(onshore)". 1992/1996 * Investigated the fluid-fluid compatibility and fluid-rock compatibility through filtration tests and fines migration studies (critical velocity) on oil free and aged cores and helped scale data to field condition. * Carried out reactivity tests of heavy oil to activate natural surfactants. * Sampled oil-water to extract chemical and radioactive tracers to monitor water breakthrough in production wells and sampled H2S at wells of the Furrial field. Designed and improved the laboratory facilities for treatment and separation of oil/water samples containing tracers using demulsifiers, ultrasound and electrical treatment. Collaborated with the risk analysis using the methodology "What IF" to use this process in laboratory. * Sampled light oil with needles on well head and well pipe (HP&HT) to geochemistry analysis. * Selected and evaluated HT resistant polymers and its blends with alkali-surfactant for HT reservoirs. Principal Research Technician, Reservoir Technology Department, 1989/1992 * Set up systems with different types of porous media and handled the tomography technique to evaluate the distribution of fluids inside the cores. * Performed extra-heavy and heavy oil thermal treatment tests using hydrogen donors, methane, water and steam in static & dynamic conditions. Evaluated the steam injection with solvents on heavy crude oil. Characterized these samples by density, °API, viscosity and thermal analysis. * Conducted the preparation/injection of polymer/biopolymer solutions in reservoir cores to evaluate flow parameters; injectivity, resistance factor (RF) residual resistance factor (RRF), brine injection, oil recovery and polymer retention, monitoring polymer concentrations by UV-Visible spectrometry and HPLC. EDUCATION 2000 BS in Chemistry (Technology) Universidad Central de Venezuela, Caracas, Venezuela 1986 Associated degree in Chemistry University Institute of Technology Capital Region, Caracas, Venezuela OTHERS SKILLS * Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Basic reservoir simulation with STARS * Languages: Spanish: Mother Tongue/English: Spoken and Written (High Intermediate Level) * Supervision of small group of professionals and students in laboratory and field work * Analysis, treatment and purification of gold of mines and jewels. Goal-oriented/Fast learner/Innovative * Data/results interpretation and preparation of progress/final reports * International exposure during technical visit to partners in North America and Europe * Co-author of international technical publications in chemical flooding (EOR) NOTICE PERIOD: One month CURRENT LOCATION: Venezuela View contact information... «« previous resume next resume »» Search Results (Resumes 851 to 900 of 1358) Go to Search Parameters... Brief Description Senior Instrumentation Specialist / Designer Fitter, Turner, Machinist, Planner, Scheduler Supervision construction commissioning startup air separation ,heavy oil etc. I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports. Operator - Track hoe, Horizontal Directional Drill 1.2 million lbs. -- Experienced in oil pipe line construction and safety - Knowledge of gasoline and diesel engine maintenance - Locating Equipment experienced and qualified Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement) International Business Development - Africa/Europe/Middle-East Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems. Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations Senior Safety Consultant seeks long/short term contract. Rigger with RGIT 20+ years experience Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer H.N.D Mechatronics. I am a 3rd year heavy duty mechanic i have worked on all sorts of equipment from electric gorman rupp pumps to desiel engine huydraulicly actuated concrete pums,air compressors ,loaders,cement mixer trucks,centerfuges , pannels,pipehaulers, forklifts Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.) Nace certified coating inspector level 3, Chartek approved fireproofing inspector & full qualified insualtion inspector. Fitter Including Machining and Diesel Fitting Precision Millwright, Welder. Turbines, Power Plants, Ethonal Plants, Steel Mill Plants. 15 years experience in the management, production, materials, logistics and international transport fields, 13 of which are at managerial level, the last 10 years being spent as an expatriate in Nigeria, France, Togo and West-Central Africa. SAP XI and Oracle skills and certification An enthusiastic and professional Engineering Manager; chartered mechanical Engineer, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initi Mechanic / Heavy Equipment Oppr. / Floorhand / Possess solid understanding in Building Services, such as designing, managing projects, supervising and evaluating payment certificates Mechanical, electrical, structural maintenance & repair, estimating, project supervision. 25+ years Procurement, Material Control and Logistics Experience / Public and Private Corporations I am working as an instrument technician in petrochemical industry and i have more than 10+ year experience in this field. I know about repaire, calibration and maintanance of electronic field instrument like transmitter, switches, control valve, dcs an dplc system, bagging machine. Logistic Job Skills: Stock Turn-in/Turn-out, Stores Indent/Requisition, Stores Data Entry, Physical Inventory Management, Stock Replenishment, Management Reports, etc. 25 yeard old Swedish nationality/ Fluent: Swedish, English, Spanish, Norwegian - Rigger Certificate, Short Range Radio Operator’s Certificate SRC-VHF, Basic Safety and Emergency Preparedness Training 17 years experience in a heavy engineering industry, progressing to senior mechanical technician.Qualifications include city&guilds in mechanical craft studies and the certificate of craftsmenship from the engineering industry training board. MWD/LWD Specialist with 3 years of Professional Oilfield Experience, Associate Degree holder in Mechanical Engineering, Got Specialised Trainings in Academy from SCHLUMBERGER & BAKER HUGHES for "MWD Technology" 10y in National Oil company, HND Mechanical, 4y Artifical lift pumps Technican, 4y Drilling & Wellservices information mangment Engineer Engineering, Millwright, Supervisor, Forman, Multi Skill, Manager, Diesel Mech, Artisan, Fitter, Electrician SCADA, DCS, T&C, O&M Senior MWD Field Engineer City and Guilds Diploma in Electrical Engineering,Apprenticeship training,5 years experience. Free! fitter /pumpman /operator/maintainer of plant at powerstation /just worked in kuwait as mechanic for us military •Anaran Project Administrative and PA to Asset Manager (StatoilHydro Company, Norwegian Company) and now I am training according to HSE/HSE Cordinator HSE, Manager, Trainer, Advisor, Emergency response,Firefighting HVAC Refrigeration Air conditioning tech. Overseas experience. Chillers. Central systems. Splits I have experience in repair of pumps, conveyors, hydraulic and pneumatic systems, crushers, mills, timber equipment. I'm Mechanical engineer Worked in Vehicle Assembly Factory as Production & Calim engineer, am professional at Working with AutoCAD 3D & 2D, photoshop & flash web design, I speak English Very Well, and am fair at Spanish, self motivated, Active, work under team group, Managerial Characteristics Senior MWD Field Engineer or Directional Driller Trainee Coordinator Experience, Lead hand and familiar with EM, Gamma, Pressure and Logging while drilling Sales Engineer/Sales Director in Computer and Engineering industry Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate I am an experienced HSE Professional knowledgeable with program-procedure development and implementation, accident-incident prevention and investigation, root cause analysis, supervision, contractor compliance, security programs, medical programs, health and food programs, environmental programs Company Dispatcher,service Coordinator,Administrative Exp. Qualified refrigeration & air conditioning technician. I have completed many courses in the refrigeration and air conditioning trade also heavy current electrical. I have completed and past my theory exam in Refrigeration Engineering I still have to do 150 hours of practical drawings. Workshop, Transport Engineering & Facilities Manager 1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   [ 18 ]   19   20   21   22   23   24   25   26   27   28   Seach Parameters Change search parameters... CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com