Resume - 12 years experience in instrumentation mining processing plant.holder of a craft...

Misco Jobs

Resume #69013

CONTACT INFORMATION:
View contact information...

Date of Birth: 22/12/69
Place of Birth: Chipata
Nationality: Zambian
Sex: Male
Marital status: Married

B. EDUCATION BACKGROUND AND TECHNICAL QUALIFICATION.
YEAR SCHOOL QUALIFICATION OBTAINED
1976-1983 Chama Primary School Grade 7 School Certificate
1984-1988 Chama Secondary School Grade 12 school certificate
1991-1993 Instrumentation Training Craft Certificate in process control
School. ZCCM. Kitwe. Instrumentation.

C. PROFESSIONAL QUALIFICATION
YEAR COLLEGE ATTENDED QUALIFICATION OBTAINED
1997 Home study with CIPS First certificate in purchasing and supply
2004 Home study with CIPS Advanced certificate in purchasing and supply
2005 Home study with CIPS Graduate Diploma in purchasing and supply
(Foundation stage)

D. SUMMARY OF WORKING EXPERIENCE.
YEAR COMPANY JOB TITLE
1993-1998 ZCCM/RAMCOZ. CONCENTRATOR. Artisan Instrumentation 1998-2000 RAMCOZ PLC Materials co-coordinator 2000-2004 KCM (Nkana) FLASH DRYER Instrumentation Technician
2004 - 2006 Kansanshi Mining Plc Instrumentation Technician
2006- Date Chambishi metals plc Instrumentation Technician.

E. PRINCIPAL ACCOUNTABILITIES AS INSTRUMENTATION TECHNICIAN.
a) Carry out planned maintenance on Automatic valves and repairs on defective ones, thus overhaul, service parts, assemble, check operation and then do the installations. Valves worked on include saunder valves, El-o-matic valves, butterfly valves, power cylinder valves, and Samson valves, pinch valves.
b) Carry out installations of weightometre and calibrations. Thus installation of weight frame and alignment and also field and panel wiring. Models worked on include Ramsey model 20 -40, Micro-tech 10 -201 and 10 -30 and also process Automatic weightometers model EMB -220, version Embe - 220, 40 -06.
c) Instrumentation Control systems worked on include the following; Spec 200, profibus and DCS (Distributed control system).
d) Carry out checks on PH transmitters and probes, thus clean probes, then buffer check with PH7 and PH4. Models worked on Endless and Hauser MYPRO CPM431.
e) Do planned maintenance on density meters, thus check parameters and against known sample, type worked on; Thermo electron corporation model Am 770 version 3 software.
f) Planned maintenance on level transmitters and also programming. Endless and Hauser prosonic - m and vegason 61 level transmitters.
g) Worked on flow meters thus prosonic and promag 53, promag 50 and promag 35. Installation and programming them to suit the pipe and process. Endless and Hauser models.
h) Carry out checks on fire alarm system (smoke detector) to ensure quick action in case of fire using carbon dioxide fire fighting system.
I) Turning of controllers and instruments to suit the process condition. Proportional, derivative and integral (P.1.D)
j) Carry out planned maintenance and checks on programming logic controllers (PLC). Models worked on are Allen Bradley, Toshiba Houston, Siemens and Mitsubishi.
k) Check on water purification loop (chlorinating) to ensure right amount of chlorine is added to the domestic water.

l) Laying cables, tubing's for new installations or replacements.
m) Carry out maintenance on Spec 200 Annuciators for interlocks n) Carry out planned maintenance and repairs on oil lube system for Sag mill and Ball mills. Bearing lube system, trunion bearing, grease seal and girth gear lube system.
o) Carry out maintenance and repairs on VSDs (Dan Foss VLTR 5000 variable speed drives).
p) Carry out bench repairs, calibrations of controllers; speed seasons for weightometers, current to pneumatic converters, level transmitters, pressure gauges, pressure switches and other instruments.

q) Circuit modifications, wiring, and repairs faulty finding on belts feeders. Models ASHE and GEC motor speed panel (3 phase thyristors control)
r) Carry out checks, repairs and installations of resistance temperature detector (RTD), thermocouple, pyrometers and thermistors.
s) Have worked on current to profibus converter 4 -2Oma to FB converter. Smart IF
303.
t) Worked on profibus to current converters PB converters to 4 -2Oma smart Fl 303.
u) Planned maintenance and repairs on the filtration plant (LAROX FILTER) by Rexroth Bosch Group.
v) Planned maintenance and repairs on the copper Cathode stripping machine by Mesco incorporation Japan.
w) Worked on CCD's Bed level system using the magnetic Reed system. Planned maintenance, repairs and weekly calibrations.
x) Worked on turbidity meters on the CCD's clarifiers. Planned maintenance, repairs and calibrations.
y) Ensured instruments have a right address before installations. (profibus).
z) Have worked on the profibus system, a series communication system. PA and DP. PA (process Automation), DP (Decentralized periphery)

F. PRINCIPAL ACCOUNTABILITIES AS MATEERIALS COORDINATOR.

a. To make available a balance flow of spares and other equipments for the concentrator.
b. To draw spares from main stores for departmental stores using requisitions.
c. Ensure goods received meet the required standard d. Advice the planner on right stocking levels.
e Help source some spares from suppliers that are out of stock and are urgent.
f. Chase or Expedite goods or spares, which are in dangerous, stock levels.
g. Ensure there is good security on doors and roofing of the stores.
H Account for the receipts, issues and goods in stock within the store. (Stocktaking)..
I. Ensure good house keeping and proper stocking of materials in the stores

G. SHORT COURSES I SEMINARS ATTENDED 1994: Attended short course on trouble shooting Electronic equipment, computer software and introduction to programmable logic controllers (PLC). 1997: Seminar on Basic supervisory course.
1998: Seminar on advanced supervisory course.
2001: Computer course at copper net (Kitwe) on Microsoft word and Microsoft Excel.
2003: Computer course at Ikon (Chingola) on Microsoft Access (2000 Intro/Intermediate)
2003: Two weeks course in South Africa on the operation of the Flash Dryer. (Anglo Platinum). 2005: Attended a five days course on VSD s (variable speed drives) in kansanshi mine plc.solwezi by simation of South Africa.
H. PROJECTS DONE.
1. Putting up loop for Davcra cell level control system thus; level transmission, controller and saunder automatic valve.
2. Installation of Temperature recorder for ball mill Temperature Monitoring on bearings.
3. Installation of Thyristor Controlled Direct current belt feeders.
4. Installation of weightometer scale, major calibration and commissioning.
5. Commissioning of flash Dryer at KCM Nkana smelter.
6. Commissioning of processing plant at Kansanshi mines Plc. Solwezi.
I. HOBIES
Playing chess, watching football, listening to music and traveling.

J. REFEREES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 1470)

Go to Search Parameters...

Brief Description

Seasoned expat. Strong broad-based tech skills and extensive project O&M exp in frontier third world environments. Road const, water rehab, airports, infrastructure rehab. Extensive EPL/EPC exp as Project Eng.

Possess 5 year s experience in Administrator Buyer and Planner .In depth practical knowledge management skill in logistic or admin. Mature with strong work ethic towards team support or report dateline. Proficient in both spoken and written English and Bahasa Malaysia and advantage 1 native language

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

I believe my experience in organization, projects and maintenance in the world largest methanol - petrochemical production site and other experience in foreign trade can help in implementation of your company's highest production, organisational and marketing standards.

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Instrumentation Supervisor

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

I am a hard worker that can follow directions I'm safety concious totally drug and alcohol free with experience in a multitude of different fields

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

Journeyman Instrument Technician with 7 years experience in the oil and gas industry

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

Blueprint Reading - Mig, arc and gas welding

Have good knowledge of the principle, practice and procedure of geology. Familiar using a personal computer with Mapinfo, Microsoft Office, Microsoft PowerPoint, and email / internet systems. Fair in English , both oral and written.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

Oil and Gas Leasing, Mineral Title research for the purpose of Leasing, Building Drilling Title Runsheets for Title Attorneys and Title Opinions, Title data entry, Deed plotting, Right of Way Title, Right of Way Acquisition

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Security, life support, camp management, logistics

• B.Sc (Hons) Geology • Diploma in Computer Studies and Programming, 1999

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

Truck Driver with experience in oil field activites.

Electrical engineer (2 years experience),researcher(1 year experience)

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

I am a motivated graduate with qualifications in Geological Engineering, Applied Petroleum Geoscience and Quantity Surveying and I am proactive, confident with excellent communicative skills. I am flexible in my approach work, accurate and punctual. I am focussed and motivated with eye for details

I am a trained geologist with HSE certificate and willing to relocate and work under challenging conditions

I am a seasoned QMS Internal & External Auditee, a trained QMS Internal Auditor and Document Controller, currently managing the implementation of ISO 9001:2008 (QMS) for a company in Nigeria. I have over five years experience in both Oil and Gas industry and Insurance Company working as document con

Strong English verbal and written communication skills • Specialized knowledge in MS Office suite- Outlook, and filling out DD Forms • Computer literacy in word processing, database maintenance, and spreadsheet software

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out