Resume - Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platf...

Misco Jobs

Resume #69541

CONTACT INFORMATION:
View contact information...

Work Experience: (last ten years):

June 2007 to KCA Deutag
July 2007 Africa and Middle East Branch.

Employed as Chief Engineer/Mechanical Supervisor by recruitment agency Jaymar (Cyprus), on the Jack-Up "Tellus" and tender drilling rig "Al Baraka"(offshore Gabon and Nigeria). Responsibilities for the supervision of the new local crews, preparing the rig and equipments for Nigeria operations program for Canadian Oil Company. Maintenance and repair of equipments, spare parts, warehousing, safety program. Responsible for the day-to day trouble free running of the Rig.

May 2006 to Pride International
May 2007 5847 San Felipe, Suite 3000
Huston, Tx 77057, USA

Chief Rig Mechanic on Drilling Unit "Pride North America". Maintaining control over the rig's preventive maintenance system and associated computer databases. Ensuring all Mechanical Electrical Marine related equipment is covered by tasks and incorporated in the PMS system (Maximo). Coordinate periodic maintenance activities plan the maintenance and service of equipment according to the PMS guidelines, ensuring that the maintenance of equipment is accurate and complete. Carrying out classification society surveys as part of continuous survey of machinery. Advise on ways of making improvements to the maintenance of the rig. Monitor equipment performance. Random spot-checking of equipment. Inspect equipment with poor reliability and high maintenance cost. Maintaining adequate spare parts to facilitate a safe and efficient operation and supervising the day to day running of the Materials Dpt. Supply rig management with maintenance statistics of the rig. Train local personnel on the use of the PMS system and administer training requirements as per company training policies. Promote and assist with the use of onboard computers for improved record keeping and rig operating needs. Demonstrate commitment to company HSE and Environmental policies through leadership and guidance.
Ensure that the permit to work and isolation systems are strictly adhered to update and maintain correct PPE requirements.

Heerema Marine Contractors
Jan 2006 to Vondellan 55; 2332 Leiden
March 2006 The Netherlands

Chief Engineer on Semi Submersible Diesel Electric with 6 azimuth thrusters Construction Mobile Unit "Thialf" ( 136709 DWT; 39960 BHP; 13000 kW ). World's biggest Cranes ( 14200 tons ), 750 crew members. Team Leader of group engineers, electricians, mechanics and fitters. Diagnose and supervise repairs on malfunctioning equipment of all types to ensure continuity of offshore operations. Performing mechanical maintenance, pipefitting, plumbing, welding, and building craft activities. Establish work priorities, provide drawings or sketches as required, assure safe practices are observed and inspect completed work.

February 2005 to Dolphin Drilling Ltd.
December 2005 P.O. Box 63; N-4056
Tanager, Norway

Chief Rig Engineer on Semi Submersible Drilling Rig "Byford Dolphin" DP3 on North Sea (Aberdeen)
Main Engine: Bergen Diesel 8800 BHP, Diesel Electric. Shift team Leader. Perform supervise and maintain a vigilant effort to assess the condition of mechanical components during the course of normal operations in conjunction with a proactive, computer generated preventive maintenance program to minimize equipment downtime or unsafe situations.

December 2004 Volunteer in Army Corp of Engineer in Thailand connected with Tsunami
Disaster as a member of the team responsible for supply Emergency
Electrical Power from Container Diesel Generators and fresh water from
Reverse Osmoses Units.

October 2004 to Oceanteam Offshore Company
November 2004. Bergen, Norway.

/Maintenance Superintendent on Construction / Accommodation DP 2 Heavy Lift.
7320 DWT.
Responsibility for the team of engineers, electricians and motorman of the offshore construction platform with 300 workers. I manage the entire marine engineering section, this is multi faceted role that ensure safe efficient operation, maintenance and repair off all machinery and systems onboard, efficient quality and expenditure control, upkeep of all engineering record and documentation. I am responsible for training Mexican crew, discipline and adequate supervision of all engineering staff to ensure that operating procedures and engineering practices are in compliance with statutory legislation and company's Safety Management Systems, Health, Safety and Environmental Protection Policy
Responsible for the general hotel and galley systems, inventory and spares, for implementation and control of computer-based planed maintenance system (T-Master).

Essar Oil
May 2001 to Mumbay, India
September 2004

Chief Mechanic on Rig building, and rig up of deep drilling land rigs and other allied equipment. Responsible for maintenance, trouble free operation, repair of D399 Main Engines and Deck Cranes.

May 1999 to, Southern Oceanic Services
March 2001 Cape Town, South Africa.

Rig Mechanic. Reporting to Chief Mechanic, involved in the repair and maintenance of all mechanical equipment on semi-submersible rig offshore South Africa.

March 1995 to P.T. Global Industries.
April 1999 Carllys, LA, USA

C/E, Maintenance Engineer on Construction Barge; Maintenance Heavy Lift Barge and DSV.
Repair and maintenance of Barge Generator Equipment, Big Boom Cranes and general mechanical maintenance. Responsible for the management and operation of all mechanical, hydraulic and electrical systems. Training with local Indonesian staff.

June 1990 to Mansal Offshore Q.S.C.
January 1995 Doha, Qatar

C/E on Drill Ship; Rig Mechanic on Accommodation Rig (semi-submersible)
Responsible for exploitation and keep on good condition Rig Power Plant all systems and Rig's equipment (inspections, overhauls, repairs, services).

April 1987 to Global Marine Drilling Company
May 1990 Port Harcourt, Nigeria.

Chief Rig Mechanic. Rig Mechanic on Drilling Rigs (semi- submersibles) and chartered Drill Ship.
Served on semi-submersibles and jack-up rigs in West Africa. Responsible for the maintenance and repair all of offshore mechanical, electrical and hydraulically equipments (crane, mud pumps, tanks, coolers, purifies, draworks, top drive etc).

Educational Details:

September 1972
To March 1977 Merchant Maritime Academy, Engineering Department. (5 years)

Gradated with multi- disciplined Engineering. Master's degree.

September 1967
To May 1972 Maritime Electro – Mechanical College. (5 years)

Bachelor's degree.

Details of Courses Attended: (last five years)

Personal Safety and Social Responsibilities.
Advanced Fire Fighting.
Medical Care.
Survival Craft and Rescue Boats.
Medical First Aid.
Personal Survival Techniques.
Shell Personal Safety.
H2S & Breathing Apparatus.
I.S.M. Code.
Ship Security.
HUET
Basic Sea Survival.

Certificate of Competency:

National Certificate of Chief Engineer no limitations kW Motor & Steam Engines. STCW 95.
Valid till 20.07.2011
Others Qualifications:
Gas and Arc welding and cutting.
Operating of Lathes, Sharper, Slotters and Thread cutting Machinery.
Ship and Oil Rigs automation and computer controls systems.
Maintenance Computer Programs PMS: (TM-Master, Maximo, ABS Netsafe).

Ashore Employment:
One year on rig building yard in Norway..
Nine months on drill ship and rig yard repair in Dubai, Norway, and Singapore as Supervisor and Mechanic.
Six months on drilling rig building yard on Batam ( Indonesia) and Singapore as Chief Engineer.
Four months in Sulzer, B&W Factory as Mechanic.

Continuing Education: (last five years )
2007. Wartsila Training Centre (Finland). Training with new generation Wartsila Engines.
2006. Caterpillar Training Institute Training Course with Caterpillar engines automation and maintenance.
2005. Institute of Technology. A/C and Ventilation Systems.
2005. Rescue Training Centre. Hazardous Cargoes and Materials.
2004. Nautical College. Automation and Computers Control Systems.
2004. Institute of Mechanical Engineers. I.S.O. Standards.

References:
Available upon request.

Interests:
Gardening, Computers, Sport, Aviation, Scuba diving.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1346)

Go to Search Parameters...

Brief Description

Free! Extensive experience in the Electric Sumbersible Pump Industry

Free! Helicopter view, fast analysing, creative in finding solutions, mind setter for safety

Free! I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

I"m a Skilled South African Millwright and Mechanical Fitter (Red Seal)

Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie

I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.

26 years maintenance electrician troubleshooting using plc and ladder logic. dc drives ac and dc motors and controlers

Have more than 13 years of experience in log interpretation

Offshore Oil Rig Motorman

Utilize extensive experience as a mudlogger and an LWD/MWD operator as a well site geologist

Driller / Tool Pusher (Onshore / Offshore)

Project Management & Supervision, System Analysis, Design & Development Work, Device Wiring & Installation, Commissioning, Operation & Maintenance, Planning, Schedule & Decision Making

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

1) Project Management -Any Refinery unit project under USD 250 , from A to Z .2) Refinery Maintenance with Turn Around Management of any unit .3) Any ISO system or safety related jobs of a Refinery .

Experienced professional having two full cycle SAP implementation experience

WELDER

To fully leverage my working experience, education and potential, I am looking for an apprentice Millwright job and operator related positions at entry or intermediate level to continue my oil career in Canada.

Long experienced (25years) in marine bunkers-lubes business, with a strong ability to multitask expertly and efficiently.Mainly active in negotiating, promoting and developing the supply business, while at the same time maintaining strong values and ethics.Able to work under pressure.

Millwright/Industial Mechanic and Power Engineer 3rd class.

HVAC BOILER TECHNICIAN

Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

Master Electrician with Millwright experience

I have over almost 35 years of technical experience, with almost a twenty five-year career base established abroad. As my enclosed resume indicates, I have more experience in maintenance machining job. My experience includes operation. maintenance and machining of various equipment parts involved in

32 years exp in seismic data processing. QC and interpretation

CAPEX & OPEX multiple projects. 22 years of EPC working background; oil & gas upstream EP, petrochemical, chemical, power generation, rail, water, nuclear & manufacturing (UK - Middle East), business & contractual awareness - FIDIC, IchemE Alliance agreement FOB, CIF, SMMIEC & SMM risk management

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

city and guilds ,years ,1,2,3 . advance craft , higher national

Analyzer and Instrument Technician, with significant experience through training and certification

Extensive experience in power, petrochemical and utilities plant startup, operation and training

I have drive, motivation, confidence and determination.

Alberta B pressure welder/red seal certified. safety tickets all up to date

Caterpillar trained technicians and mechanic can do overhauling and repair all caterpillar engines generators and machines and have a good knowledge in troubleshooting of mechanical and electronic caterpillar engines,can do components repair, pumps,final drives,pump drives,trnsmission torque conv.

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

More then 20 years experience as Welder

I Retired after 20 year of USAF Military Active Duty as an Aerospace Ground Equipment Technician and work for 20 year as Aerospace Ground Equipment Technician. One year Aercraft Aresting Barrier MAAS / Bak -12 Mechanic and 2yrs 7months Power Pro Generation Technician.

I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.

I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.

Over 15 years of progressive work experience in office management providing effective and comprehensive support to managers and senior executives of the company. Document control and administrative works ranging from typing, processing of documents to data control and filing.

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,

I have extensive experience in plant start-ups, trouble-shooting, and process management as a supervisor, technician and operator. I am seeking an operations oriented position.

at present working on cyberbase rig totally computerised

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out