Resume - Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in ope...

Misco Jobs

Resume #69554

CONTACT INFORMATION:
View contact information...

PPROFESSIONAL EXPERIENCES
Company Name: Gas Malaysia Sdn. Bhd
Title: Senior Technician in Operation & Maintenance Department
Date Joined: 1994 Date Left: Present

RESPONSIBILITIES:

1. NATURAL GAS (NG) AND LIQUIFIED PETROLEUM GAS (LPG) STATION (METERING STATION)

* Conduct regular station inspections for any abnormalities and to ensure gas station and its facilities are in good condition. Station inspection include district station, service station, area station, NGV station, residential regulator station, odoriser stations, LPG bulk station and LPG manifold station. This inspection will assess on supplies pressure inlet and outlet, regulator, filter pressure differential indicator, gas meter etc.

* Perform switching over dual run station, to test on critical device such as slam shut valve, monitor and worker regulator, pressure relief valve (PRV/PSV ) etc. Presently, controlling about 400 NG station, 70 LPG Bulk Tank Station, 300 manifold stations and more than 30,000 residential in Klang Valley (Kuala Lumpur City).

* Lead a group of technician to service or troubleshoot on any emergency work occurred in the gas station. Expert in servicing and operating of gas regulator such as Bryan Donkin, Instromet, Tartarini, Fisher Controls/Francel etc. The system is currently using is Slam Shut Valve, Monitor/Worker regulator, OPSO and Relief Valve concept.

* Execute others Preventive Maintenance schedule in order to maintain gas station in good working order. These PM inclusive:
-Pressure Recorder paper chart monthly change out
-Battery and fibre tip pen change out
-Meter lubrication (rotary and turbine)
-Paint touch up for prevent corrode
-ACR function test (for LPG)
-Soft part change out for Crical Devices (regulator)
-etc

2. NATURAL GAS (NG) AND LIQUIFIED PETROLEUM GAS ( LPG) PIPELINE

* Responsible for the natural gas feeder pipeline (360psi) after regulated down from 700psi at city gate stations, distribution line (60 psi) and service line (5 psi) before supplying to industrial, commercial and residential areas in Peninsular Malaysia. Currently, my accountability is to supervise and monitor nearly 100km gas pipeline steel and PE pipe of several gauges laid underground of Kuala Lumpur city center i.e. from NPS 2" to 16" of steel pipe and from 20mm to 125mm of PE pipe.

* Plan and execute pipeline inspections to assess any indication of potential leakage or malfunction and abnormality of the gas distribution system. Implemented a systematic approach to detect any third party activities in the vicinity of the gas facilities.

* Monitor Cathodic Protection (CP) data (corrosion control-sacrificial anode type) for every 6 months to check on current flow through anode/magnesium.

* Inspection on Insulation Joint (IJ) and Spark Gap performance to ensure that the CP current does not flow to the aboveground gas station and cause undue depletion of anode. To protect insulation flanges sets and pipeline from lightning strike and fault current.

* Inspect all pipeline steel and Polyethylene (PE) valves for its gear box/actuator, valve seat/body greasing and the chamber condition as well. Sealant activity is required if there is symptom of leaking at the valve through cavity point.

* Perform pipeline leakage surveillance activities to identify any gas leak along pipeline route by using mobile detector such as FID, CGI, OMD ( optical methane detector – mounted to vehicle ) etc.

* Conduct tracer wire exercise to enable buried PE pipe to be located as well as steel pipe which normally used if there is a trial pit activity by third party. Competent in using various wire locator types such as Radiodetection, Heath, Fujitech etc.

* Establish pipeline integrity management as guidance to monitor and assess the effectiveness of the Sacrificial Anode Cathodic Protection system, pipe coating and corrosion The mandate is to ensure the integrity of the pipeline running under and aboveground along the route. Presently, pipeline current mapper equipment is used for the purpose.

* In-charge of odoriser stations where odorant is added into gas to give strong smelling material which gives a destructive warning odor to Natural Gas in order to alert of gas leaks. Conduct odorant intensity level check at the user end and to standardise level odor (1 over 5 o the lower explosion limit).

* For LPG pipeline which transporting 5 to 10 psi gas pressure and normally using MDPE pipeline to the residential area similar activities being taken to avoid any interruption of the gas supply. This system is using manifold cylinder 50 kg and bulk tank of capacity 1000 liter to 32000 liter.

3. OTHERS TASK

* Being an on-call personal technician on rotation monthly basis to respond for any emergency work after office hours. Need to be a first responder to arrive at site within 45 minutes.

* Involve in pipeline and station commissioning on the new project upon completion, this activity related on N2 injection, purging, flaring and gas volume detection.

* In charge on small section of LPG stocks control which is duty to check on stock balance at site. Manage on stock check, order and receiving activity for LPG cylinder manifold and bulk tank system. Assign personal to receive stock at site and ensure all instruction and procedure to be complied. Emphasize on safety concern especially during LPG refilling by tanker.

* Responsible on office files and drawing management which covers entire NG's and LPG's handover document including its content. To ensure the entire important item such as as-built drawing, ATI, ATO, manual kept accordingly and comply with internal SOP procedure.

* Responsible to maintain company vehicles as per maintenance schedule.

PROJECTS:

1. LPG Bulk Tank Re-qualification works

* Involved on LPG bulk tank re-certification project which required for inspection after 12 years of the tank-manufactured year and every 7 years subsequent to the first recertification year.

* Every year we did conduct 2 to 4 tank for this project and took three months to completed.(For 2008 there will be 22 bulk tank stanby to recertification)

* To ensure all contractor works shall comply with Malaysian Code and Practice MS 830: 1984, MS 930: 1986, Gas Supply Act 1993, Gas Supply Regulations 1997, MS 641 and the relevant specifications referred herein.

* To monitor fabrication to supply temporary manifold during activity.
* To monitor and conduct de-commissioning of bulk tank (flaring and zero gas)
* To monitor and conduct disconnection all fitting and piping.
* To monitor and conduct entry into confine space (bulk tank) for internal cleaning.
* To conduct and verify inspection of thickness gauging (approved by JKKP and prepare for NDT contractor).
* To monitor and witness pneumatic test (with JKKP)
* To conduct functional test.
* To monitor painting and tagging activity
* To monitor and conduct re-commissioning.
* To monitor disconnection all fitting and piping at temporary supply system

OTHER PROJECTS:

1. Hot Tapping For NGDS to PETRONAS NGV at Segambut. Hartamas, Kuala Lumpur City Centre, Malaysia, etc.

2. Hot Tapping For NGDS ( Relocation )at Shapadu Highway/ Meru, Malaysia

Supervise and witness of all the activities of hot taping from the safety, exposure and examination of pipeline, fit up of split Tee, welding of split saddle and inspection (MPI, RT and UT), pressure testing, perforation and line commissioning to ensure follow the Approved hot taping procedures. Comply with ANSI/ASME B31.8 and API 110

3. Mass Balancing at restoration area of LPG System

This exercise was conducted due to imbalance profit getting compared to expenses. Potential of leaking especially in the aging used pipeline may contribute gas loss along the way. So that manages a group of technicians to conduct pressure testing and excavation to find out the gas escape point and to repair it immediately.

Company Name: Sapura Telecommunications Sdn. Bhd
Title: Technician in Installation Department
Date Joined: 1992 Date Left: 1994

RESPONSIBILITIES:

* Installation and testing of telecommunication cables and switching equipment for private building. This private exchange (PABX) using Northern Telecom of Canadian Technology and also required traveling trough out Malaysia. I was involved on all PETRONAS Building and plant such Gas Processing Plant 1&2, Refinery plant at Paka Terengganu, MNLG Bintulu Sarawak, PETRONAS HQ at DayaBumi of KL, OGP& Carigali Offices for the telephone line problem.

Company Name: Pernas NEC Sdn. Bhd
Title: Technician in Installation Department
Date Joined: 1991 Date Left: 1992

RESPONSIBILITIES:

* Installation of telecommunication cable and switching public exchange equipment for Telekom Malaysia with capacity up to 20,000 lines. This public exchange using NEAX system of Japan Technologies and took 2 weeks to 6 months to complete. This job also required traveling trough out Malaysia country.

COURSES ATTENDED _______________________________________________________________________

GAS MALAYSIA SDN BHD
* Safety and Emergency Response in house course
* Cathodic Protection, Theory & Data Interpretation in house course
* Introduction to Natural Gas course at INTEKMA
* Properties and Hazard of Natural Gas course at INTEKMA
* Introduction to Steel and P.E Pipe course at INTEKMA
* Material Inspection course at INTEKMA
* Construction Practice course at INTEKMA
* Regulator Principle of Operation course at INTEKMA
* Regulator Station Acceptance Test
* Regulator Overhaul and Troubleshooting
* Regulator Principles of Operation
* Piping Problem
* Introduction of Cathodic Protection
* Steel Pipeline Emergency repair work.
* Hazard Identification Risk Assessment and control – JSA Training
* Defensive and safety driving Trainings
* Accident / incident investigation and Reporting.

SAPURA TELECOMMUNICATION SDN.BHD
* Basic communications course at Singapore ( 2weeks )

EDUCATION__________________________________________________________________________________

1987 ~ 1990

MARA University of Technology,
Shah Alam, Selangor
Malaysia
(School of Engineering-mechanical)
Attended until Third Year

1985 - 1986

Upper Secondary Science School,
Teluk Intan, Perak
Malaysia.(same as O level)
(Malaysian Certificate of Education: Grade 1)

1982 ~ 1984

Methodist English Secondary School
Tanjong Malim, Perak
Malaysia.
Lower Certificate Education: 7A

TECHNICAL SKILLS & KNOWLEDGE ____________________________________________________

Competant of Gas Fitter Class 2 (Natural Gas)

Authorised Gas Tester by NIOSH (Confine Space Entry)

Member of Technical Safety Committee

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 1489)

Go to Search Parameters...

Brief Description

I have a University Degree in transport engineering. I’ve 3 years experience as cadet and OS. This year I’ll finish professional course and acquire navigator diploma. As beginner in offshore industry I’m ready to start at the bottom and begin my career on an oil rigs from entry–level positions.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc..

I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects.

Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,

Over six years experience working as an engineering and environmental geologist. Manage, coordinate and field supervise all drilling activities and field work for large scale geotechnical and environmental projects for government and industrial clients in the eastern United States and Africa.

maintaining and operating various types of heavy equipment in the forest industry, building industrial roads, road deactivation

I am qualified to work as an analyst, appraiser or consultant. Would welcome assignments in operations research, finance, market research, data processing and related areas.

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

Control room and plant operator, 10 + 2 +3 yrs of education, adequate computer knowledge, reciprocating,centrifugal pumps and compressors, handling DCS systems, experience-2yr 3 months in Oman,

Mark up Leading hand, Blast crew member, Westrain Plant Operator Training Course

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

I am a qualified artisan skilled in hydraulics and heavy duty equipment, currently working as a product specialist and studying towards a mechanical engineer diploma.

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

3 years of safety experience and seeking more.

Geologist with Exploration Experience

Journeyed Industrial Electrician

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Interested in Industrial Instrumentation Mechanic Apprentice Position: Currently have the following safety courses: H2S Alive, CSTS, First Aid, Confined Space and High Angle training, WHMIS, Firefighting Technical Certificate.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Looking for senior level assignments in Project Management & Business Development, Health & Safety Management, Human Resources, Learning & Development and Business Startup.

MWD, drilling, construction

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Coordinate services for wells,oversee project,finalize all paperwork and run daily reports for wells.

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

HE Electrician/Crane Operator with 5yrs. experience

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

Diploma in fire and safety, GOOD ALROUNDER IN HSE FEILD

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

Sr operations Manager

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

Piping, PDS, PDMS, PSDS Designer Over 9 years experience in the field of Mechanical, Piping Engineering Design / Drafting and Construction. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.

Operations Supervisor

SAP FICO consultant with 10 years experience

Seeking Chemist or Laboratory Technician Position-will relocate

I am an extremely well organized, tedious, and hard working individual. I am well versed in directional drilling and, knowledgable in all aspects of the drilling industry. I am

Research Thesis on ANTENNA/RF

A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.

25 yrs Heavy diesel mechanic in Construction and Pipeline

20 + Years Experienced Heavy Equipment Operator / Haul-Truck Driver Supervisor to Relocate Anywhere. I desire to work for a well established yet growing company.

Manage systems, hardware software, connectivity link, Manage Active Directory,Manage DHCP Serverý

diploma in mechanical engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out