Resume - Supervision construction commissioning startup air separation ,heavy oil etc.

Misco Jobs

Resume #69671

CONTACT INFORMATION:
View contact information...

EMPLOYMENT HISTORY

Senior Commissioning Supervisor Global Energy/Air Liquide November 24th 2007- March 20 2008

Worked at Opti long lake AIR SEPARTION UNIT Project Supervising the Commissioning Team with QA QC filling absorbers with alumina and mole sieve coordinating punch list items and reinstatement running up a 5000 hp 7 stage GE and Siemens compressor implementing and supervising the permit to work system for contractors. Supervised and Coordinated Filling of Cold boxes With Perolite
Supervised a team for blowing piping systems FLUSHING OF POTABLE WATER LINES AND RAW WATER SYSTEMS INCLUDING LP MP STEAM AND CONDENSATE.

PROCESS OPERATOR (EXTRACTION DIVISION) March 1, 1980 – November 20 2007
Syncrude Canada Ltd.
Mildred Lake, Alberta

BITUMEN RECOVERY
Start-up and Shut-down of Bitumen Recovery Extraction Plant
Conveyor systems
Tumbler and Screen Systems (oil slurry preparation)
Primary and Secondary Floatation separation vessels
Tailings, Pumps and Piping Systems (associated pumps and water systems)
Various maintenance functions (multi-tasking)

FROTH TREATMENT
Involved with the Construction Commissioning and Start-up of Plant 67
Start-up and Shut-down of The Aurora Feed System to Froth Treatment Plant
5 Years Control Room Operator in Plant 6 – TDC 3000

LOWER BENCH FEED SYSTEMS -EQUIPMENT AND PIPING
Pre commissioning and commissioning of CLORIDES MANAGEMENT
SYSTEM and start up IPS AND ALSO COMMISSIONING AND STARTUP
OF CAP IPS
Naptha Recovery Unit Start up and operate
Inclined Plate Settlers Start up and operate
Tailings System Start up and operate

BOTTOM FLOOR FEED SYSTEMS - EQUIPMENT AND PIPING
Cuno Filters
Vent and Nitrogen System
All Utility Systems (water 50# and 150# steam, air etc.)

TOP FLOOR FEED SYSTEMS - EQUIPMENT AND PIPING
Bird Scroll Centrifuge
Alfa Laval Centrifuge

PLANT 67 FEED SYSTEMS - EQUIPMENT AND PIPING

Tailings System
Alfa Laval and Equipment
Vent Systems
Utility Systems

SPECIAL PROJECTS
Tailings Reclaim Barge Relocation
Tailings Oil Recovery Pilot test (Commission and Start-up)
Construction phase commissioning and Start-up in Plant 67
I worked days for eight months on the UE-1 Expansion Project for Syncrude and studied the Engineering Design Specifications. I learned the systematic approach and the stages involved of construction projects. I was also involved in developing manuals and isolation procedures studying P&IDS, also field construction including tie-ins hot taps, fire water, oily water and sewer installation right to start up and operations of the new unit,. Attended daily safe work plan development meetings.

PRE COMMISSION AND START-UP PROJECTS
Inclined Plate Settlers in Plant 67. Centrifuges, Tailings and Utility Systems Start-up (October 1995)

ADDIIONAL QUALIFICATIONS

Supervisor Training Program
Industrial First Aid (Volunteer Fire Team member for 8 years)
Loss Management Certified
WHIMIS
4th class power engineeer

EDUCATION

Grade 12 (G.E.D Equivalency) June 1993
Completed at Keyano College
Diploma received

REFERENCES ; AVAILABLE UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1338)

Go to Search Parameters...

Brief Description

I have over 19 years of experience working in the Petroleum Pipeline Industry doing a variety of roles. Until very recently, I have been on a special assignment as a “Lead Project Inspector” on a new Pipeline Delivery Facility, but also have other additional managerial & supervisory responsibilities

DCS Engineer working on power and oil & gas facilities

7-years High School. Experience covers surface and subsurface production maintenance operations, onshore and offshore facilities’ maintenance, engineering projects execution, drilling equipment maintenance, planning and training aspects in various supervisory and management roles.

Gas turbine controls mark

CADD DRAFTSMAN

Quick learning capabiliy of any hard assignment. Objective: To work hard for a long-term position in a reputed organization that provides healthy and challenging environment, where I can utilize my skills, professional experience and educational backgrounds to benefit mutual growth and success.

Service Support/ Product Support Heavy Equipment Maintenance Manager

CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

I have been working on milling machines, lathe machines, boring machines, tool and cutter grinders, surface grinders, bench fitting and using hand tools and machine tools to manufacture, repair and produce parts

QA Manager,Quality Engineer, QA/QC Supervisor, Auditor, Instructor,Multi-Discipline Field Inspector

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Millwright Journeyman

Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.

MSC chemistry , QA, QC, R&D, ISO, GMP, GLP, Business promotion

Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased

Experienced heavy duty mechanic. Worked in workshop and field service. Managed workshop and fleet of field service vehicles. Engineering experience include testing and reporting on ADT’s. Currently employed by Bell Equipment Co. (Hitachi AH500 – AH300). Got experience on lots of different machines

Over 20 years Quality Management and Supervision experience in Heavy Engineering Construction Industry

Rigging/Heavy Lift And Transport

Crane Operator

Electrical

Experienced Laboratory Manager. 17 years petroleum lab experience. 12 years management experience. Extensive knowledge of ASTM IP, UOP, ISO test methods, ISO 9000, purchasing, budgeting, equipment maintenance, staff management, environmental and safety requirements in petroleum testing laboratory.

Registered EU Mech. Eng w/ 15 years experience in the oil and gas environment - North America, North Africa, Middle East,. High-energy individual whose best attribute is my ability to work well with other people.

Instrument Engineering, Calibration, Testing, Installation, Commissioning, Maintenance, Familiar with control systems like DCS/ESD etc. Familiar with Metering Systems

Welding and electrical and management and mining class 32 hour certified fork lift operator

Draftsman

Manufacturing, Maintenance, Sales and Service, Application Engg, Project Engg, Administration

Natural gas pipeline design, testing, supervision, route survey, standards , ASME, ANSI, ASTM, API, AGA, AWWA, AWS, Compliances Health, safety, environmental , SCADA, air, water quality, pressure regulation, metering, filteration, odorization monitioring, inspection, deatail reporting.

Piping and Welding Supervisor QA

SKILLS SUMMARY Manager, with strong electrical and mechanical background, 15 yrs construction and maintenance electrical experience, 9 years mechanical experience, performed purchasing and business development skills,. Proficient in Microsoft Word, Excel,

I have over 27 years in mechanical repairs

Operating both Hydraulic and Numatic Cranes,Maintenance and Operation of Cranes

Operations Supervisor - Overseas experience

Siemens , Allen Bradley PLC programming, Honeywell TDC 2000 and Foxboro DCS programming and troubleshooting. Profibus Certified installer and troubleshooting. Project management. Wonderware InTouch and Citech SCADA systems. Excellent troubleshooting skills.

I am now presently employed as a Shift Chemist ( Quality Control Laboratory) in a Petrochemical Plant( JBF RAK FZ LLC, Ras Al Khaimah United Arab Emirates). My experience as a Production Supervisor has included a four year position as Quality Assurance Supervisor and Quality Control personnel

BSc in Economics(First Class), ACICMN, AICEN

Geoscientist. I am a highly qualified, versatile geoscientist with 7 years of Petroleum industry experience, 2+ years in Processing Geophysics with a major global energy company.

Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.

Safety, Hazardous Materials, Gas Turbine Engine Experience, Pruhdoe Bay Oil Field Experience

Dirt Superintendent / Foreman/ Heavy Equipment Operator with 25 years experience.

Senior Instrumentation Specialist / Designer

Fitter, Turner, Machinist, Planner, Scheduler

Supervision construction commissioning startup air separation ,heavy oil etc.

I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports.

Operator - Track hoe, Horizontal Directional Drill 1.2 million lbs. -- Experienced in oil pipe line construction and safety - Knowledge of gasoline and diesel engine maintenance - Locating Equipment experienced and qualified

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)

International Business Development - Africa/Europe/Middle-East

Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out