Resume - Profoundly talented and skillful UT/welding Inspector with over ten years experi...

Misco Jobs

Resume #70516

CONTACT INFORMATION:
View contact information...

Professional Qualifications:

PCN UT Level II (3.1, 3.2, 3.8, 3.9) – CSWIP 3.1 Welding Inspector.

Summary of Courses/training attended:

* June, 30th 2004 – course of instruction and practical training on the ultrasonic examination on duplex and super duplex material conducted by Amec-Tekfen-Azfen, consortium. in Baku Azerbaijan
* September, 23 to 27 2002 – welding inspection course conducted by TWI in Batam Indonesia.
* 2001 – MT/PT course conducted by OIS Oceaneering, ASNT level III.
* 1994 – Comprehensive practice of ultrasonic weld examination course for level II conducted by SANDT (School for Applied of Non Destructive Testing) in Kuala Lumpur Malaysia.
* 1993 – Safety Training Observation Program (STOP) under DuPont License conducted by Pt.Mc Dermott Indonesia Batam.
* 1993 - Ultrasonic testing course (out side) conducted by APITINDO, ASNT level III approved by MIGAS/BATAN Jakarta Indonesia.
* 1993 – Quality work group course conducted by Pt.Mc Dermott Indonesia Batam.
* 1993 – Ultrasonic testing course conducted by Pt, Mc Dermott Indonesia Batam, 80 hrs of theory and attained 800 hrs working experience in accordance with SNC-TC-1A.
* 1993 – Internal welding inspection course conducted by Pt, Mc Dermott Indonesia Batam.

Professional Experience

Brunel Energy Sdn Bhd Malaysia seconded to Clough International Pty Ltd.
July 2007 – March 2008

UT cross checker
* Carry out UT cross check on critical joint and ensure all production daily UT activity in accordance with standard and project specification.
* Review and endorse all UT report.
* Reporting daily UT progress to site QA/QC coordinator.
* Involve into final reviewing team to review structural package prior to third party endorsement and load out.
Project completed: Maari WHP

AMEC – TEKFEN – AZFEN Consortium, Baku Azerbaijan.
April 2004 – July 2007

UT/Welding Inspector.
* Carried out daily UT activity on various joint configuration
* Carried out UT on heavy wall thickness of duplex and super duplex piping material.
* Carried out daily welding inspection activity in accordance with standard and project specification
Project completed: CA – C & WP and PCWU Topside Platform.

AMEC – TEKFEN – AZFEN Consortium, Baku Azerbaijan.
January – 2005
UT cross checker.
* Carried out UT cross check on critical joint.
Project completed: Shah Deniz Gas Export.
Oceaneering - OIS Batam.
February 1999 – April 2004
NDT/Welding Inspector
* Carried out UT/MT/PT and Welding inspection on various project.
Project completed: Conoco Wellhead A&B Deck and Jacket, Conoco FPSO Belanak, Mars Jacket, Angsi Carigali, Premier Oil. Clough offshore, Helang. Changi East Phase 3 etc.
Oceaneering – OIS Batam.
October 2002 – December 2002.
UT cross checker.
* Carried out UT cross check on critical joints.
Project completed: Dominion Spar hull.
Pt. Mc Dermott Indonesia, Batam.
November 1990 – February 1999.
QC/NDT Dept.
* Carried out daily UT activity on various joint configurations and various project.
* Carried out welding inspection at pipe mill prior during and after welding.
Project completed: Phillip 24-3, EPMI (Esso) DC 2885 Guntong, Brunei Shell Petroleum CPCB7. ARCO China Yang Cheng 13-1, Total Thailand 4, 5 and 6, Marathon Petroleum Indonesia KRA&KG, Serawak Shell Sdn Bhd M3PQ-A,Total Raiser Platform, Foster Wheeler, Total Thailand WP7&8, EPMI(Esso) Lawit A, Unocal Indonesia Santan, Total Myanmar 1, 2 & 3, Unocal Thailand, Total Bongkot module Thailand etc.
Pt. Mc Dermott Indonesia, Batam seconded to OIS Plc Batam.
September – November 1998.
UT cross checker.
* Carried out UT cross check on girt weld, long seam weld and spiral weld.
Project completed: Tunu GTS 5 – EPSC 2/PECIKO – EPSC 4 Gas pipeline Senipah to Badak. East Kalimantan Indonesia.

Education

Senior High school of Technology.
Indonesia (1985)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 1489)

Go to Search Parameters...

Brief Description

Health, Safety, Environment

Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati

HVAC, Maintance

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

londery worker ,waiter & data feeding

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.

Experienced Automation/Process Control Engineer

Master Mariner and have experience as Senior Officer on LPG Carriers

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

I have Masters Degree in Geology with experience in Coal Exploration.

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

Qualified Instruments Technician with a National Diploma and Certificate of Apprenticeship

ms word,internet marketing,power point,quality control assuransce,NIM nigerian institute of management , NISLT nigerian institute of science and lab technicaince , PGD post graduate diploma in industrial chemistry , HND in polymer technology

This letter is to express my interest in applying for an oil rig job. I have an Irish national craft certificate and over 7 years experience as an electrician. Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up wi

I am electrical diploma holder,having ten years experience in variety of field like textile company,power plant and research centre.I desire to settle in Australia for betterment

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Medic/Doctor/HSE

Survey Technician/Mapper/Drafter

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Instrument Technician with Overseas Russian Experience.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

Profoundly talented and skillful UT/welding Inspector with over ten years experience in field of Quality control and inspection of light and heavy fabrication for refinery, oil and gas transmission line and onshore/offshore steel structure.

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

HEAVY EQUIPMENT OPERATOR

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

Mining & construction Equipment, Oil field production, Power generation

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Familiar in Auto cad (2D&3D), Microstation & Ms Office. Strong practical knowledge of Electrical. Good team player with supervisory skill

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

API 653 experience in corrosion engineering, Inspection,engineering consultancy and RBI techniques. Specific experience in Hi end inspection skills, storage tanks and pipeline inspection. Acoustic emission and Guided wave trained.Overseas experienced

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Man of many trades

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out